Article Introduction：1. Open the Flash software and you can see the software interface. Draw animations on the stage canvas. Here, select the pen tool on the toolbar with the mouse, such as. 2. Drag the left mouse button on the canvas to draw several lines. 3. Press the ESC button to cancel and continue drawing. At this time, the line changes from green to black. It means that the lines drawn by the pen are drawn. 4. Use the pen tool to draw a closed line. At this time, you can see that the closed area of ​​the line is filled with blue. 5. Press the ESC button to cancel and continue drawing. At this time, the line changes from green to black. Indicates that the closed line of the pen drawing has been drawn. 6. You can also use the pen tool to draw a curve and drag the nodes to adjust the curve.

2024-04-10 comment 0  457

Article Introduction：Use the brush tool and make the following settings in the brush options. Check [Shape Dynamics] and set the [Control] inside to [Pen Pressure]. Adjust the brush's hardness to 100%. Using the Pen Tool, outline the path of the line in the canvas. After drawing, select a suitable color, right-click on the screen, select [Stroke Path] in the menu, select [Brush] as the tool, and check Simulate Pressure. Cancel the path and add an outer glow effect to the line layer, so that an outer glow line is ready! Then copy a few more lines and the effect will be great.

2024-04-17 comment 0  1156

Article Introduction：There are many useful tools in CorelDRAW, many of which can be used to draw curves, such as the Bezier tool and the Pen tool. For many novices, the pen tool is not so easy to control. When drawing curves, it will appear to bend and cannot draw ideal lines. What should I do? Let’s take a look at the solution next! The specific operations are as follows: 1. Open the CorelDRAW software and click the pen tool to draw a curve. At this time, we can clearly see the deviation at the bend. 2. Pause the drawing curve and select the node where the bend is made. 3. Click delete and you will find the curve. This happens when drawing curves with the Pen Tool becomes smoother because it comes with a preview function, which allows it to predict the direction of the user's curve.

2024-02-12 comment 0  957

Article Introduction：来源：中国教程网 作者：雕兄本教程的效果很多教程已经介绍过。大致的思路：先用钢笔画一条曲线，然后描边做出一条线条，再定义成笔刷。这一步一定要用线条，其它的效果不明显。然后可以直接用画笔画也可以用路径描边来制作自己想要的效果。本教程作者使用画笔画出丝

2016-06-01 comment 0  2830

Article Introduction：First we use the brush tool and make the following settings in the brush options. Check [Shape Dynamics] and set the [Control] inside to [Pen Pressure]. Then adjust the brush hardness to 100%. Then we use the pen tool to outline the path of the line on the canvas. After painting, we choose a suitable color, right-click on the screen, select [Stroke Path] in the menu, select [Brush] as the tool, and check Simulate Pressure. Then cancel the path and add an outer glow effect to the line layer, so that an outer glow line is ready! Then copy a few more lines and the effect will be great.

2024-04-18 comment 0  469

Article Introduction：First we use the brush tool and make the following settings in the brush options. Check [Shape Dynamics] and set the [Control] inside to [Pen Pressure]. Then adjust the brush hardness to 100%. Then we use the pen tool to outline the path of the line on the canvas. After painting, we choose a suitable color, right-click on the screen, select [Stroke Path] in the menu, select [Brush] as the tool, and check Simulate Pressure. Then cancel the path and add an outer glow effect to the line layer, so that an outer glow line is ready! Then copy a few more lines and the effect will be great. Isn't it very simple? You can draw any type of lines. As long as you draw well and follow the settings above, all kinds of lines can be beautiful. Go and try it now.

2024-06-02 comment 0  727

Article Introduction：Create a new file, select the pen tool to outline the appearance of the wooden board and the internal wood grain texture. Drag to the brush palette and define it as an art brush. Use a pen to draw artistic words and apply the brush. Because of the size of the brush definition, you need to adjust the pen appropriately. Brush size ratio (double-click the corresponding brush in the brush palette to apply all one brush. You can see that because the length of the line is different, the same brush can produce different effects. Some brushes are modified to other defined wooden boards. For a more lively shape, add iron nails (black circles), and appropriately change the position of the stroke. Duplicate the layer, expand the lower layer (Object - Expand), merge (Pathfinder, Add Area), and offset Path (Object-Path-Offset Path), set the color, and move the position appropriately

2024-04-17 comment 0  386

Article Introduction：1. Draw a rectangular strip and click to align it in the center. 2. Close the background layer, click Edit, and define the brush preset. 3. Click to open the brush settings panel, select the saved brush, and set the size. 4. Then check Shape Dynamic, and the parameters are as shown in the figure below. 5. In the center of the canvas, keep clicking the left mouse button to get the effect as shown below. 6. Press the ctrl+L keys to reverse the direction to get a black concentrated line. 7. Change the background color, and the completed speed concentration line drawing effect is as shown in the figure below.

2024-04-19 comment 0  535

Article Introduction：1. First rotate the pen tool and rotate [Path] in the option bar. 2. Then click on the canvas to add the first point, and click again to add the second point. For straight lines, hold down the SHIFT key. 3. Now set the foreground color to black, right-click on the canvas and rotate [Stroke Sub-Path]. 4. Finally, rotate the [Pencil] and click [OK]. In this way, the lines drawn by the pen tool are completed.

2024-06-04 comment 0  793

Article Introduction：How to draw a curved dotted line in PS: 1. Open PS and create a new document; 2. Select the brush tool; 3. Select the brush options and adjust the brush size, hardness and color; 4. Click the mouse on the canvas to draw a solid line; 5. Select the path tool; 6. Select the curve tool in the path tool panel; 7. Use the curve tool to draw the path; 8. Select the brush tool; 9. Select the line path in the path panel; 10. Select the outline; 11. Select dashed line in the outline option; 12. Click OK; 13. Adjust as needed.

2023-07-26 comment 0  6424

Article Introduction：Step one: Open the CDR software and create a new blank document. Draw a square, fill it with blue and round the corners. Step 2: Use the oval tool to draw the bicycle wheel. The effect is as follows: Step 3: Then use the straight line tool to draw two lower lines. The effect is as follows: Step 4: Then use the pen tool to draw the bicycle. The frame comes out, and the effect is as follows: Step 5: Then draw straight lines and other line segments, the effect is as follows: Step 6: The last simple bicycle icon is drawn. The effect is as follows:

2024-06-13 comment 0  782

Article Introduction：1. Create a new document, call up the ruler and guide lines, draw a perfect circle, set the fill color to none, set the line color to red, and set the stroke to 100 pixels, as shown in the picture. [Tip] When drawing a perfect circle, hold down shift+alt to draw a perfect circle from the center to all sides. 2. After locking the perfect circle, use the pen tool to draw a triangle at the position shown in the picture. 3. Then use the pen tool to draw the rest of the left part, as shown in the picture. 4. After grouping the left part, select the mirror tool, hold down the alt key, and click as shown in the picture. In the pop-up dialog box, set the parameters as shown in the picture. 5. After confirmation, clear the reference lines to complete the final effect. 6. Using the same method, you can draw more symmetrical icons.

2024-05-06 comment 0  421

Article Introduction：Open ai, create a new canvas (Ctrl+N), draw a circle, and copy the circle (first Ctrl+C, then Ctrl+B), press shift to reduce the same proportion, use the pen tool to draw a line, then use the rotate tool (R), copy Add, adjust the number of spools yourself. Repeat the first step again to make the car fender and draw some shadows. To copy, press Ctrl first and then press shift to move horizontally. Paint the frame. I first roughly drew the shape of the frame and then made fine adjustments. Draw cushions, handles, and pedals. Add text, use the Path Text Tool and simply fine-tune it to embellish it and you're done.

2024-04-23 comment 0  936

Article Introduction：Open the pscs6 software and of course draw a path. Then the normal thing is to directly right-click under the pen tool and select [Stroke Path] to stroke the path. The problem you may encounter at this time is that the [Simulate Pressure] option is checked, but after confirmation, the path drawn does not have the effect of simulating pressure, but is a line of equal thickness from beginning to end. So how should this problem be solved? It's very simple. In fact, it's just because our brush options have not been adjusted properly. After the adjustment is completed according to the following process, the lost pen pressure can be easily recovered. Before stroking the same path, we first select the brush tool, and then press the F5 shortcut key on the keyboard to open the brush preset panel. Note: Be sure to select the brush tool, no

2024-04-18 comment 0  573

Article Introduction：1. How to do computer painting? Computer painting works need to be drawn with the PS pen tool. 1. Open the PS software, create a new canvas of any size, and click. 2. After creating the canvas, click on the left toolbar. 3. On the canvas, first click any point with the left mouse button to create a 4. Then click the next point according to the work you want to draw and Connecting wires. If you need to draw a curve, click and hold the left mouse button and drag up and down to draw curves with different arcs. 5. When a graphic is drawn, you need to use the left mouse button to directly click on the first anchor point to close the line from beginning to end. 6. After all the required graphics are drawn, you can start filling in color. 8. In the blending options panel, configure the image’s style, shadow,

2024-08-05 comment 0  873

Article Introduction：Many people use CorelDrawX4 software in their office work, but do you know how to draw straight lines in CorelDrawX4? The following article will tell you how to draw straight lines in CorelDrawX4. Interested users can come and take a look below. Open CorelDRAW, click "File" - "New". Then select "Freehand" in the toolbox. Hold down the ctrl key to draw a straight line. Select the second "Bezier", hold down the ctrl keyboard to draw a straight line, and click on the triangle on the right. Select the fourth "Pen Tool" and hold down the shift key to draw a straight horizontal line. Finally, look at the effects of the three drawing methods.

2024-03-05 comment 0  1256

Article Introduction：1. Use the Pen Tool, set to Shape, and draw a stroke path. 2. Right-click on the shape 1 layer, and rasterize the layer. 3. Execute [Edit] - [Define Brush Preset], enter a name, and confirm. 4. Brush preset: Set the pen tip shape, and the spacing is 1. 5. Shape dynamics: Set the angle jitter, the value is 300, and the control is fade. 6. Switch the background to black, choose different colors, and use the streamer brush to draw freely. The effect is as shown.

2024-04-17 comment 0  795

Article Introduction：Open Adobe Illustrator, create a new document, find the brush tool in the toolbox on the left, use the shortcut key B to find the brush in the window, and open the brush panel. Click the small triangle on the right side of the brush panel to expand it and find the brush library. There are many types of brushes in it. Open one or two of them and use the rectangle tool to draw a rectangle. In the selected state, click the brush tool, select a brush in the brush library and click it, and the lines of the rectangle will be applied to the selection. The brush is placed at the upper path stroke. You can also change the color of the applied brush. In the same way, use the Ellipse Tool to draw an ellipse. Apply one of the brushes and you can also use the Brush Tool to draw at will. The selected brush will be drawn immediately. Applies to the path drawn by the brush.

2024-06-10 comment 0  507

Article Introduction：Canvas special effects include particle effects, line animation, image processing, text animation, audio visualization, 3D effects, game development, etc. Detailed introduction: 1. Particle effect, by controlling the position, speed and color of particles to achieve various effects, such as fireworks, raindrops, starry sky, etc.; 2. Line animation, by drawing continuous lines on the canvas, create various effects. A dynamic line effect; 3. Picture processing, by processing pictures, you can achieve various cool effects, such as picture switching, picture special effects, etc.; 4. Text animation and other features.

2023-08-18 comment 0  1510

Article Introduction：Open ai, create a new document, select [Rectangle Tool], draw a square shape, select [Selection Tool], drag the anchor point on the right angle of the square in the direction of the center, turn the right angle into a rounded angle, select [Rectangle Tool] , draw a rectangle as the mail icon, select the [Pen Tool], add anchor points in the upper left corner of the rectangle, below the center point of the rectangle, and in the upper right corner of the rectangle, and set the stroke to 3px. The two lines under the envelope, and the fourth Draw each step with the pen tool. Select the [Partial Selection Tool], select the corner of the envelope shape drawn near the center point, pull it upward into a circle, press shift, select the shapes drawn with the pen tool in the above steps with the mouse, and select [Object]-- -[Extended], add non-ordinary graphics to

2024-04-23 comment 0  726