Article Introduction：Edraw Diagram Expert is a new flow chart and network diagram drawing software, which is novel, compact and powerful. Edraw diagramming experts can easily draw various professional business flow charts, organizational charts, business charts, program flow charts, data flow charts, network topology diagrams, etc. How to set the arrow style of Edraw icons 1. Open Edraw icon expert 2. Set the default connection line arrow style for the connection line. Find Page Layout in the menu bar and click Connector. 3. Select the line you want to change and click the line on the right side of the operation interface to change the line you selected. 4. Select the start and end arrow types according to drawing needs. 5. You can also change the size of the arrow.

2024-08-01 comment 0  835

Article Introduction：Step 1: Open the AutoCAD2020 software, create a rectangle and mark it, as shown in the picture. Step 2: Click the [small arrow] behind [Annotation] in [Annotation], as shown in the picture. Step 3: The [Annotation Style Manager] pops up and click [Modify], as shown in the figure. Step 4: Click the [Symbols and Arrows] option. Set the arrow size: [10], click [OK], as shown in the figure. Step 5: After setting, click [Close], as shown in the figure. Step 6: Finally, the size of the marked arrow is adjusted, as shown in the picture.

2024-05-08 comment 0  705

Article Introduction：1. Hold down the shift key to draw a perfect circle in PPT, then copy the perfect circle twice, and stick it together as shown below. Notice in the picture below that the blue guide line exactly crosses the diameters of the three circles. (Pay attention to the arrow in the picture below). 2. The next step is very important. Insert an inverted trapezoid in the middle of the three circles. The long side of the trapezoid is at the diameter of the middle circle. (arrow in the picture below). 3. If you view the perspective version, please pay attention to the position pointed by the arrow in the picture below. Exactly tangent to both circles. 4. Next, adjust the remaining details. For example, the rounded corners at the bottom of the light bulb are actually completed with a rounded rectangle. The effect is as follows. Especially the small semicircle at the bottom is solved by arc graphics. 2 points in the picture below. 5. After using the direction arrows to fine-tune the distance between the graphics, add a T shape in the middle.

2024-03-26 comment 0  1313

Article Introduction：We usually can insert pictures into PPT when making it, but some friends who have just learned how to set the transparency of pictures in PPT still don’t know how to achieve it. So today I will teach you the specific steps. As shown below. 1. First, open and create a new PPT document on your computer (as shown in the picture below). 2. Next, select [Insert]-[Shape] in the upper toolbar, select a rectangle and draw it on the blank canvas (as shown in the red circled part and the red arrow in the figure below). 3. Then, select [Fill] in the upper toolbar (as shown in the red circled part and the red arrow in the figure below). 4. Next, select [More Settings] in the [Fill] dialog box, (as shown in red below

2024-03-20 comment 0  1110

Article Introduction：1. First, the editor will talk about the simplest method - the custom shape tool. We open PS and create a new blank document. 2. Select the custom shape tool as shown and find the arrow shape tool. 3. Set the shape you want to draw (it can also be a pixel or a path), click the left mouse button on the canvas and drag to draw an arrow. Open PS in the same way and create a new canvas. This time we select the straight line tool. Click the gear selected by the editor, check the starting point or end point of the straight line and add an arrow in the drop-down menu, and set the length-to-width ratio of the arrow. Hold down the shift key, hold down the left mouse button and drag on the canvas to draw a straight arrow as shown below. Think the straight lines are too thin? We can set the thickness and color of the straight line in the settings bar to draw a drawing you are satisfied with.

2024-06-02 comment 0  1588

Article Introduction：We need to open Adobe Illustrator CS6 software first, create a new document, customize the size, click the OK button, and then we use the rectangle tool to draw a rectangle in the document, as shown in the picture, with customized color. So what is the use of the selection tool? As the name suggests, the selection tool is selection. Object, select the selection tool. Use the selection tool to select the blue rectangle you just drew. As shown in the figure, the selected state has 8 small dots. Then we place the mouse near the eight small dots of the rectangle, and the mouse arrow will turn into a The rotation arrow is used to rotate the rectangle to the left or right. As shown in the picture, it is possible to rotate. How to determine the degree of rotation? Next, we use the selection tool to select the rectangle, select Object → Rotate, and then we turn on rotation. dialog box, spinning

2024-06-05 comment 0  1017

Article Introduction：1. Open the geometric sketchpad and click [Customize Tools] - [Proportion] - [Golden Section] on the sidebar. 2. Click the mouse in a blank position of the canvas to determine one endpoint of the line segment, then move the mouse to a suitable position and click to determine the other endpoint position, as shown in the figure. How to adjust the golden section line segment? 1. To adjust the length of the line segment, select [Move Arrow Tool] and press and drag left and right on the two endpoints of the golden section to extend or shorten the length of the golden section. 2. To adjust the direction of the line segment, select [Move Arrow Tool] and press and drag up and down on the two endpoints of the golden section to rotate the angle of the golden section. 3. Change the position of the line segment and select the [Move Arrow Tool] and click on the created golden section line.

2024-04-22 comment 0  646

Article Introduction：1. Open the geometric sketchpad, click [Draw] - [Define Coordinate System], click [Draw] - [Draw Point]. Enter the coordinates of the point and click Draw. Draw points (0, 2), (12.56, 0), (12.56, 2) in sequence, and click Finish. 2. Use the [Line Segment Tool] to connect the four sides to make a rectangle. Select the four points and four sides of the rectangle. Click [Edit] - [Copy]. Click [File] - [New], create a new artboard, click [Edit] - [Paste]. The rectangle is pasted in. Use the arrow tool to move the rectangle to the appropriate place. 3. Construct a circle with the shorter side of the rectangle as the radius. Draw a point on the top edge of the rectangle, select this point and the shorter side, click [Construct] - [Draw with center and radius]

2024-04-22 comment 0  855

Article Introduction：1. Create a new geometric sketchpad file. Draw a triangle ABC, and draw an arbitrary vertical line segment DE outside the triangle. 2. Select [Move Arrow Tool], select point E and point D, and select the menu [Transform]-[Mark Vector] command. Label the line segment ED as the translation vector. 3. Select point A, point B, point C, line segment AB, line segment AC, and line segment BC, and select the menu [Transform]-[Translation] command. Click the [Translate] button in the pop-up dialog box to obtain the graph as shown in the figure. 4. Select [Line Segment Tool] and draw line segments AA’, BB’, and CC’. 5. Select line segment AA’, line segment AB, and line segment AC, and select the menu [Display]-[Line Type]-[Dotted Line] command to get the graph as shown in the figure. 6

2024-04-17 comment 0  941

Article Introduction：1. First open a notebook in OneNote and right-click in the red rectangular area in the picture. 2. Select [New Partition Group] in the menu. 3. A new partition group is formed. Let’s rename it for easy identification. 4. Right-click on the new partition group and select [Rename]. We renamed it [Level 1 Folder]. 5. Click [Level 1 Folder] to enter the sub-level of this partition group. 6. You can see that an upward green arrow appears on the upper left side of the partition bar. Click this arrow to return to the upper directory. 7. Sub-partition groups can be built below the partition group, and can be nested multiple times. We can create [second-level folders] and [third-level folders] in sequence according to the above method. 8. You can see that on the left

2024-05-06 comment 0  692

Article Introduction：1. Swipe on the mobile phone desktop to open the background application. 2. Select the application that requires split screen and press and hold. When the following page appears, click the button indicated by the arrow. 3. Then select the second app you want to enable split screen. 4. As shown in the picture below, the split screen is successful~ 5. In addition, if you want to exit the split screen, you only need to pull or slide the horizontal line to the top or bottom.

2024-04-25 comment 0  861

Article Introduction：When we make ppts, we tend to pursue the beautification of the page and add some pictures to the content. Many users want to set the transparency of the pictures to improve the beauty of the entire page, but many people don’t know how. Carry out the operation. In response to this problem, the editor of this issue will introduce the specific operation method. I hope that the content of today’s software tutorial can be helpful to the majority of users. Let’s take a look at the detailed operation steps. Introduction to how to adjust image transparency in ppt: 1. Click Insert at the top and click the arrow under the shape. 2. Choose the shape of your picture, usually a rectangle. 3. Draw a rectangle with the same size as your picture in the ppt. (It’s okay to be different, but it may be distorted) 4. Right-click the graphic, click the arrow under Fill, and select

2024-08-26 comment 0  586

Article Introduction：Construct angle. Use the [Point Tool] to make a common point in the plane, and then use the [Line Segment Ruler Tool] to draw two lines to make both sides of the angle. Construct angle bisectors. Select the [Move Arrow Tool] in the sidebar, then hold down the [Ctrl] key and click two lines respectively to select the entire angle. Select [Construction] - [Angle Bisector], as shown in the figure. Adjust the angle bisector. At this time, an angle bisector appears but it is relatively long. Use the [Point Tool] to make a point on the angle bisector, and then use the [Line Segment Ruler Tool] to connect the vertex to the points on the angle bisector. At this time, the long angle bisector becomes a dotted line. Select the dotted line and press [Ctrl+H] to hide it. The angle bisector is constructed, as shown in the figure.

2024-04-16 comment 0  998

Article Introduction：1. To make points and lines, you must first make a line. The lines you will make in the future will be based on it. As shown in the picture, first use the [Line Segment Ruler Tool] in the sidebar to draw it by clicking twice on the drawing board. A line segment. Then select the [Point Tool] in the sidebar and click the mouse cursor on the drawing board to make a point outside the straight line. 2. To draw parallel lines, click the [Move Arrow Tool] in the sidebar, hold down the [Ctrl] key and click on the points and lines in sequence, select the line segments and points, and click [Construction] - [Parallel Lines] in the menu bar command, as shown in the figure. Now there is a parallel line passing through the point, but the parallel line is relatively long. Use the point tool to make 2 points on the parallel line as the two endpoints of the line segment to be intercepted. Now use the [Line Segment Ruler Tool] on the sidebar to connect the two endpoints, this time on the parallel line

2024-06-01 comment 0  1073

Article Introduction：1. Making measurement values ​​We make a right triangle. Open the drawing board, first let's make a right triangle, click [Customize Tools] - Triangle - Right Triangle on the sidebar, click in the tool area, and then drag the mouse, you can see that the right triangle is made . Measures the height of a triangle. Use the [Move Arrow Tool] on the sidebar to select a right-angled side, and click the [Measure]-[Length] command on the menu bar. At this time, the height of the right-angled triangle is measured, and the measurement value is as shown in the figure. 2. Modify the value name. Now the measurement value displays the length of line segment AB. If you want to change it to the height, click the mouse on the measurement value, then right-click and select [Label of distance measurement value], as shown in the figure. This will pop up the distance measurement value dialog box, select [Tag

2024-04-17 comment 0  756

Article Introduction：How to create a mind map in Word? Many users have been asking this question recently. In fact, our Word has this function, and the effect is no worse than that of professional mapping software. So how do you make it? In this issue, the editor will talk about it. Please share the specific steps and methods, hoping to help the majority of users. The method steps are as follows 1. Turn on the computer and enter WPS. After opening the Word document, find Insert in the upper toolbar and click Insert. 2. There will be many icons in the insert function. Click the shape, and then you can choose your favorite image to draw on the document. 3. As shown in the picture, combine the rectangle and the arrow and place them as shown in the picture. 4. After selecting the rectangle with the mouse, click the right button of the mouse.

2024-08-21 comment 0  586

Article Introduction：1. Create a new PPT file. 2. Insert a blank slide. 3. Insert the shape, ellipse. 4. Click on the drawn ellipse, then click on Format in the upper column, the width and height information will appear, and then set the width and height to the same, so that a circle is drawn. 5. Continue to click Shape Fill in Format, select No Fill, and draw a circle. 6. Copy this figure and set its shape outline to a dotted line. Click the arrow in the lower right corner of the size to adjust the two figures to the same position. Right-click the dotted line figure and set [Send to Top]. 7. Insert a rectangle, set it to be filled with white and have no outline, and place it between the two circle layers, where you want the dotted line.

2024-06-01 comment 0  1084

Article Introduction：Hot text introduction: When the mouse points to the [Move Arrow Tool] and slides over the name of the object introduced into the text box, or when you press and hold the name of the object introduced into the text box, the object will flash [heat]. The text entered in this way is called hot word, also known as hot text. Example steps are as follows: Step 1: Draw and create operation buttons. Open the geometric sketchpad, use the [Line Segment Tool] to draw △ABC as shown in the figure below, use the move tool to select the line segment BC, and execute the [Measure]-[Length] command to measure it. The length of side BC, shown in the upper left corner of the artboard. Make an operation button, select point C, execute the [Edit]-[Operation Button]-[Hide/Show] command, click OK in the pop-up dialog box, and you will get the operation button of hidden point C. Step 2 Create a text operation button and select the left side

2024-04-16 comment 0  459

Article Introduction：Draw line segment AB. Open the geometric sketchpad, select the [Line Segment Ruler Tool] on the left sidebar, click once on the sketchpad to determine an endpoint A of the line segment, hold down the Shift key, drag the mouse to draw a horizontal line, and click at the appropriate location Once, determine the other endpoint B of the line segment, so that the line segment AB is drawn. Measure the length of line segment AB. Use the [Moving Arrow Tool] to select line segment AB, click the [Measure] menu in the upper menu bar, and select the [Length] command from its drop-down option, so that the length of line segment AB is automatically measured in the upper left corner of the drawing board. Make hot text. Select [Text Tool] on the left sidebar, double-click and drag out a text box on the artboard, then click on the measured line segment length, and a text about the length of line segment AB is established in the text box.

2024-04-17 comment 0  674

Article Introduction：WPS2019 is a document editing and processing software that is widely loved by friends. It plays an important role in daily office work. Whether it is editing various documents or improving office efficiency, WPS2019 can give us great help. However, some friends don’t know much about how to create a rounded rectangle in WPS. Let me introduce you to the specific steps. First, open the WPS2019 software and create a new document. Select the Insert menu in your document and click the Shape option. Next, find the "rounded corners method" in the shape options. Steps: 1. In WPS2019, click Insert in the menu above. 2. Then click the arrow in the shape drop-down. 3. Finally, click on the rounded rectangle inside.

2024-01-13 comment 0  1213