Article Introduction：Step 1: Open the DiskGenius software and select the partition you want to adjust. Step 2: Click the [Partition] menu, and then select the [Resize Partition] option. Step 3: In the pop-up [Adjust Partition Capacity] window, enter [Adjusted Capacity], and then click the [Start] button. Step 4: Click the [Yes] button in the prompt box to start the non-destructive resizing operation of the partition.

2024-05-08 comment 0  913

Article Introduction：How to adjust partition in win7? Users need to select management to enter the computer management page, and then they can perform partition processing through disk management. By creating a new simple volume, users can change the setting size, so that the user's partition can be adjusted. The following is an analysis of how to adjust the partition method in win7. This method is also very simple for novices. Analysis of how to adjust partitions in win7 1. First, we right-click the computer on the desktop and select Manage. 2. Enter the computer management page, click Storage below and select Disk Management. 3. Then we right-click and select New Simple Volume in the tab. 4. The New Simple Volume Wizard prompt box pops up, we click Next. 5. The setting partition will be displayed on the right

2023-06-29 comment 0  2064

Article Introduction：Do you know how to use the partition tool diskgenius to adjust the size of the C drive partition? Below, the editor will bring you a tutorial on how to use the partition tool diskgenius to adjust the size of the C drive partition. I hope it will be helpful to everyone. Let’s learn with the editor! 1 . First, open the partition tool diskgenius software and enter the home page interface, as shown in the figure below. 2. Then, check the capacity of each disk and allocate part of the remaining maximum capacity to the C drive, as shown in the figure below. 3. Select the location of the G drive, right-click the mouse, and select the "Resize Partition" option in the pop-up menu, as shown in the figure below. 4. After the dialog box pops up, fill in the space capacity you want to allocate to the C drive in the space column at the front of the partition, and fill in the space at the back

2024-03-04 comment 0  713

Article Introduction：How to adjust the C drive partition that is too large: First download the free win10 partition tool Partition Assistant, install and run it; then select the C drive and click the "Adjust/Move Partition" option; then when the mouse pointer changes to a two-way arrow, drag to The capacity position you are satisfied with; finally click "OK".

2020-02-14 comment 0  6591

Article Introduction：The C drive of our computer is always full, and we have to solve this problem. The easiest way is to adjust the capacity of your C drive. Many users don’t know how to adjust the capacity of Win7 partition C drive. In fact, the steps to adjust the capacity of Win7 partition C drive are very simple. So today I will teach you how to adjust the capacity of win7 partition c drive. Steps to adjust the capacity of Win7 partition C drive: 1. Right-click the computer and select Manage. 2. Click to open Disk Management under Storage. 3. Click the C drive and then click "Compress Volume". We can wait a few minutes for the system to query the available compression space. 4. After entering the value in "Enter the amount of compressed space", a new partition will appear. 5. Right-click on C drive and select

2023-07-08 comment 0  2930

Article Introduction：Since we sometimes cannot predict or partition with the wrong drive letter, it often causes great inconvenience in our subsequent operations. Here I will record an incorrect partition and then adjust the storage space size of the home and root partitions. The whole process! ① Check the partition status of our existing machines Centos download: http://www.gooln.com/other/8820.html ​ [root@weidianse

2017-06-23 comment 0  2357

Article Introduction：How to adjust the partition size in win11? In fact, the method is very simple. Users can click on the management under this computer, then find the disk management and check if there is no available space to perform the operation. Let this site carefully introduce the setting method of win11 partition size adjustment for users. How to set up win11 partition size adjustment 1. First, right-click this computer and open Computer Management. 4. If there is no available space. 7. Enter the desired simple volume size and click Next. 8. Keep all other settings as default and click Next. 9. Finally, click Finish to create. 10. If we have unnecessary partitions, just right-click and click Delete Volume. (Deletion will directly clear the data. If there is no backup, you need to make it in advance.

2024-08-07 comment 0  286

Article Introduction：1. First, open the Partition Assistant. 2. Then, select a partition. 3. Next, click Challenge/Move Partition on the left. 4. Finally, click OK.

2024-06-03 comment 0  876

Article Introduction：This article mainly introduces how to adjust the partition size under Centos/Linux (taking home and root partitions as examples). It has certain participation value. Students in need can learn more.

2017-06-18 comment 0  1719

Article Introduction：This article mainly introduces how to resize partitions in Linux without loss. The editor thinks it is quite good. Now I will share it with you and give it as a reference. Let’s follow the editor and take a look.

2017-05-24 comment 0  2945

Article Introduction：Many of our friends will print out the content after editing it in Excel. Sometimes the print area is not set, and some unnecessary content will be printed out. Many people don’t know how to set the print area. In response to this situation, today The software tutorial will share with you the operation method of adjusting the printing area. Let’s take a look at the detailed setting method. How to adjust the excel printing area 1. Open the edited Excel document and select the area you want to print, as shown in the figure (the shaded layer is the area you want to print). 2. Click the Page Layout tab, select the print area option, and click the Set Print Area sub-option. At this time, we have successfully set the print area. 3. After setting the printing area, we need to select

2024-09-13 comment 0  627

Article Introduction：(1) Backup first assemble the files in the partition to be changed. Operations on the disk may cause data loss. It is best to save important data to other partitions before starting work. (2) Obtain relevant information 1, Run $df to check the file system information. Note down the mount point and device file corresponding to the partition you want to adjust. This step is to check which device file /usr/local corresponds to /dev/. This article uses /dev/ hda7 as an example. 2. Run #sudofdisk/dev/sda. Enter fdisk, press p, and view the disk partition information. Note down the starting cylinder number and ending cylinder number of /dev/sda8. Let them be start, end.and write down a&qu

2023-05-15 comment 0  5456

Article Introduction：On sports community platforms like Hupu, users can adjust the order of content in "My Zone" according to their own preferences and habits, so that they can access sections or functions of interest more quickly. So how do I adjust the order of my zones? Go check it out below. How to adjust the order of my zones: 1. Click to open "Hupu" on the mobile phone desktop. 2. Click "Special Area". 3. Click "Edit Order" in the upper right corner of the "My" column. 4. Drag the area icon to adjust the order of the areas. 5. Finally click "Finish".

2024-07-03 comment 0  757

Article Introduction：1. First open the Partition Assistant, select the split disk, right-click and click Split Partition. 2. Then enter and enter the size to be split. 3. Finally adjust the size and click OK.

2024-06-01 comment 0  945

Article Introduction：This article mainly introduces how to resize partitions in Linux without loss. The editor thinks it is quite good. Now I will share it with you and give it as a reference. Let’s follow the editor and take a look.

2017-06-04 comment 0  3865

Article Introduction：Autosizing Textareas with PrototypeWhen designing user interfaces, it's often desired to have textareas resize automatically to accommodate...

2024-12-12 comment 0  234

Article Introduction：Many times we need to split a partition into multiple partitions. Do you know how to split a partition with the partition tool diskgenius? Below, the editor will bring you a method to split a partition with the partition tool diskgenius. Let us take a look below. Bar. Select the partition to be split, right-click the mouse, and select the "Split Partition" menu item, as shown below: DiskGenius will pop up the Adjust Partition Capacity dialog box. You can set the split partition size by dragging the edge of the partition, and then click "Start" button. The software prompts the operations to be performed and precautions. Click the "Yes" button and the software starts to split the partition. Wait for the operation to complete. After the operation is completed, click the "Finish" button to adjust the partition dialog box.

2024-03-05 comment 0  1282

Article Introduction：Partition Assistant Professional Edition is a disk management tool that integrates powerful functions. Its highlight lies in its user-friendly interface design and smooth and efficient operation process. Partition Assistant Professional Edition fully covers core functions such as partition creation, resizing, formatting, seamless merging, and convenient migration, aiming to provide users with a one-stop hard disk space management solution. How to partition using Partition Assistant? How to use the Partition Assistant to partition: 1. Start the software: Open the Partition Assistant and select the disk that needs to be split. 2. Select split: right-click the disk and select the "Split Partition" option. 3. Set size: Enter the desired size of the new partition in the split interface. 4. Adjust boundaries: Adjust partition boundaries to ensure the settings are correct. 5. Apply changes: Click OK

2024-08-01 comment 0  518

Article Introduction：How to adjust the zero frame rate in the absolute zone? The frame rate will affect our game experience, so what frame rate can be set to? Next, the editor will introduce to you the adjustment method of zero frame rate in the absolute zone. Friends in need can refer to it. Introduction to the frame rate adjustment of "Zero Zero" 1. Currently, the mobile version of the game only has 30 frames and 60 frames options. 2. In the future, the official may open 120 frames based on the improvement of game optimization. Method to enable unlimited frame rate on PC: 1. First open the game and find the “Settings” button in the lower right corner. 2. Then find the frame number option in the screen. 3. Finally, click to adjust the frame rate to unlimited to complete the setting.

2024-07-15 comment 0  402

Article Introduction：First open the "Control Panel", enter "System and Security", then click "Create and format hard disk partition" to enter the "Disk Management" page. Right-click and select "Partition" and select "Compress Volume" from the menu to adjust the partition size. Finally, select the space that needs to be compressed, click "Compress" to compress, and complete "Adjust Partition".

2019-10-24 comment 0  7163