The assembly method of Lenovo desktop computers is cumbersome, which intimidates many users. PHP editor Xigua hereby brings you a detailed guide to analyze the Lenovo desktop computer assembly process step by step. This guide will cover every aspect from selecting accessories to completing assembly, helping you easily assemble a powerful Lenovo desktop computer.
Lenovo desktop assembly is to add memory modules or solid-state drives to the original standard configuration.
Desktop computer assembly wiring is mainly to separate the internal components of the desktop computer. The device is powered on. Includes hard drive power supply, DVD power supply and main box fan. Motherboard power supply, these power supplies are all connected to various plugs on the power box.
Assemble a desktop computer and reinstall the system:
1. Make a USB flash drive, then go to the relevant website to download the win system and save it to the USB boot disk, restart the computer and wait for the boot screen to appear and press Start Shortcut key, select u disk boot to enter the u boot main menu, select the "u boot WIN8PE standard version (new machine)" option, press the Enter key to confirm
2. Select the win image in the pe installation tool Place it in the c drive and click OK
3. At this time, click the "OK" button directly in the pop-up prompt window
4. Then the installation tool starts to work, we need to wait patiently for a few minutes
5. After completion, a pop-up prompt box will prompt whether to restart immediately. At this time, we can just click Restart Now.
6. At this time, you can remove the USB disk and restart the system to start the installation. We do not need to perform any operations, just wait for the installation to complete.
Steps to reinstall the system on Acer computers:
1. After the computer enters the system, open Xiaobai's one-click reinstallation and wait for the local detection to be completed. 2. Then select the system version that needs to be reinstalled and click
3. Keep clicking Next for the following steps, and wait patiently for the system installation to restart successfully. 4. Start the installation after the computer restarts, and officially enter the Acer computer system after multiple restarts.
The wiring steps for assembling a desktop computer are as follows:
1. Insert the CPU. Find the CPU socket on the motherboard, open the socket protective cover, and insert the CPU in the direction of the arrow on the corner. Be careful not to bend the pins. Apply a layer of thermal conductive glue to the CPU.
2. Install the radiator. Place the heat conduction pad at the bottom of the radiator on the CPU, then align the hooks and fastening buckles on the radiator with the fixing holes on the motherboard, and secure the radiator to the motherboard.
3. Install the memory module. Open the memory slot of the motherboard and insert the memory module vertically according to the direction of the slot.
4. Connect the power cord. Plug the power cord into an electrical outlet and plug the other end into the power plug on the motherboard.
5. Connect the hard drive and solid state drive. Connect the SATA data cable to the SATA interface of the hard drive, then plug the power cord of the hard drive into the power supply and secure the hard drive.
6. Connect the graphics card. Insert the graphics card into the PCI slot of the motherboard and plug in the power plug.
7. Connect the front panel interface. Connect the front panel connector on the motherboard to the front panel cable on the chassis. Standard motherboard front panel interfaces include power and reset switches, hard drive and power lights, speakers and USB interfaces.
8. Connect the fan, USB interface, etc. Connect all fans, USB interfaces, etc. to the corresponding interfaces on the motherboard.
9. Connect the monitor. Connect the monitor's interface to the graphics card.
10. Install the chassis side panel. After all the lines are connected, install the side panels of the chassis.
After completing these steps, connect the power and turn on the computer and confirm that the computer is working properly.
The computer configuration is as follows:
Processor sixth generation I5-6500 processor, radiator: Kyushu Fengshen Xuanbian Shooter Edition, motherboard: Colorful B150M-K, graphics card: Colorful Netchi GTX950 , Memory: Kintek 8GB, Hard drive: SanDisk 128GB solid state, Chassis: Xingu, Power supply: Xingu, Monitor: Samsung 17-inch high-definition display. The price of this configuration is about 2,800 yuan, and the configuration is also quite impressive.
1: The first step: Determine your own needs:
1. Determining your own needs is the first step in doing anything. Before buying a machine, think clearly about buying a new machine. Finally, what is the main purpose? Different groups of people use computers for very different purposes. A clerk in a company and a person who mainly plays games have very different needs for computer configuration. We should, while meeting our own needs, It is only right to choose according to the most suitable budget.
2. For example, as an optional computer for general office use (except for professional software office needs), the Pentium G4560 without independent graphics is enough for daily office work, but if you have graphic design software such as PS and need it, a larger computer will be needed. Memory and gaming requirements require a better graphics card, so before you start choosing a computer, it is most important to determine your own needs.
2: Step 2: Determine CPU
1. The first choice for all computer accessories must be the CPU. The order of selection should be to select the CPU first, then determine the motherboard, then determine the memory module (memory modules are so expensive now!) and then select the graphics card, Cooling, hard disk, etc., calculate the power consumption and finally select the power supply and chassis.
2. If you are not a garbage person, it is recommended to buy new rather than old CPUs first. Although CPUs will not wear out, there are no new motherboards equipped with old CPUs. Old motherboards are very It's easy to have all kinds of problems, and if you're a novice and can't get a good motherboard, it's easy to fall over. Of course, it doesn't matter if you're a trash guy.
3. You can actually choose either AMD or Intel platform. After all, AMD has successfully turned around with Ryzen and is not inferior to Intel in all aspects. If I have to give a recommendation, then this is enough. For those who use it (watching movies, playing LOL games, browsing the web, and those who do light work), just choose Intel’s Pentium processor. For those who play games, choose Intel Core processor with a higher single-core frequency (in fact, i3 is enough Because games require more graphics cards), professional practitioners who need a lot of video rendering design and so on choose AMD's Ryzen platform.
Three: Step 3: Determine the motherboard
1. After determining the CPU, the pins are determined, and then there is a rough range of motherboards with the same number of pins, and then take a look at yourself Do you have any special needs, such as whether you need overclocking, how expandable the memory module is, whether you need an m.2 interface, whether all the required interfaces are complete, etc. As long as they are met, the rest is worth every penny. The goods are divided, just choose a motherboard you like.
2. Many people have two extreme attitudes towards motherboards. One type of people prefers to use the lowest-end graphics card, while the other type of people have a very large budget for motherboards. The author How do you choose a motherboard that can meet your needs, that is, how to assemble a desktop computer?
CPU installation The CPU must be put down smoothly.
Step/Method 2
Then cover the iron cover, press the iron rod firmly into place, and the CPU installation is completed.
Step/Method 3
It is very easy to install the memory. Align the memory and the bumps on the memory slot, press left/right respectively, and hear a small "pop" sound. The left/right clamping position will be automatically closed, and then the other side can be pressed in the same way.
Step/Method 4
The power supply installation method is as follows.
Step/Method 5
The motherboard installation method is as follows.
Step/Method 6
Hard disk installation The hard disk can be installed in the bay. The general principle is to install it in the middle to ensure more heat dissipation. Install four screws.
Step/Method 7
Graphics card installation Nowadays, independent graphics card is not necessary to install. The CPU or motherboard has integrated graphics card. It is no problem to meet the basic requirements. Installing the graphics card is not difficult. Just remove the chassis baffle, insert it into the PCI-E slot, and then tighten the screws. If the motherboard has multiple PCI-E X16 slots (the longest one), give priority to the one closest to the CPU to ensure that the graphics card runs at full speed.
Step/Method 8
Motherboard wiring Motherboard power supply/CPU auxiliary power supply: Align the bayonet position and connect it.
Step/Method 9
Front audio and front USB: Align it with the fool-proof interface and plug it in.
Step/Method 10
The hard disk light, power light, power button, and restart button are installed according to the motherboard markings (color wire positive, black and white wire negative) HDD LED represents the hard disk light, and POWER LED is the power supply Light, RESET SW is the reset button, POWER SW is the switch, and PC SPEAKER is the PC speaker. Nowadays, hard drives basically have SATA interfaces. Just connect the SATA power cable (5PIN flat cable) and data cable.
How to assemble an acer desktop computer?
How to assemble a new blue desktop computer?
The above is the detailed content of How to assemble Lenovo desktop computer?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
