php editor Apple introduces you to the computer configuration required for CNC powermill programming. When programming CNC powermill, computer configuration is crucial, which directly affects the efficiency and accuracy of programming. A powerful computer configuration can improve the speed and stability of programming, allowing you to complete your work better. Next, let us learn about the computer configuration required for CNC powermill programming!
CNC PowerMill programming has certain requirements for computer configuration, as follows:
Operating system: Microsoft Windows 10 (64-bit) or Microsoft Windows 7 Service Pack 1 (64-bit).
Processor: Multi-core 64-bit processor, such as AMD Phenom II or Intel Core i7.
Memory: At least 8GB RAM is recommended, 16GB or more is recommended for demanding parts.
Graphics card: NVIDIA Quadro at least 2GB and fully compatible with OpenGL 2.0.
Screen resolution: 1920 x 1200.
Disk space: 160GB.
It is recommended to choose a computer with the highest configuration. The specific configuration recommendations are as follows:
CPU: Intel i7 3960X, six cores and twelve threads, long-term overclocking at 4.2GHZ.
Motherboard: High-end motherboard.
Memory: Quad-channel DDR3 1600 32G memory.
Hard drive: 120G solid state drive plus 1TB mechanical hard drive.
Graphics card: K2000 graphics card.
Please note that these configurations are for reference only, and specific configurations need to be adjusted according to personal needs and budget. If you need to process large and complex parts or perform high-precision machining, you should choose a computer with higher configuration.
Finally, after repeated attempts, we increased the CPU voltage to 1.392V, kept the FSB at 100MHz, and raised the multiplier to 46x. We overclocked the i7 3960X with a default frequency of 3.3GHz to 4.6GHz. All test programs ran stably and passed the copy test.
Limited by the CPU's own structure and heat dissipation conditions, although we further set the pressure during the test, we were never able to obtain a higher stable frequency. In general, the results of 4.6GHZ are still very satisfactory. Compared with the default 3.3GHz, there is a considerable improvement.
This depends on your budget. Because you didn't give a price reference, I'll assume that you are doing industry applications and this computer is used for rendering. It is a productivity tool and is used to make money. Reference configuration: CPU: Core i7 3930K 3600 yuan or i7 3960X 7000 yuan Motherboard: Biostar Tpower Seagate 2TB 620 yuan Graphics card: Leadtek Quadro 2000 professional graphics card 2900 yuan Chassis: TT Inspector, full tower case 700 yuan Power supply: ANTEC Neo ECO 520 rated 520W 470 yuan Monitor: Dell U2312HM 1450 yuan Description: 6-core 12-thread LGA 2011 platform Core i7 3930K or 3960X has powerful multi-threaded rendering capabilities and is more cost-effective than Xeon processors of the same grade. And it can be slightly overclocked, which generally does not affect reliability. The principle of this configuration is to pursue the highest possible rendering capability at an unreasonable price, so as to meet the high performance and at the same time, the price-performance ratio is not bad. For computers of this level, using the Extreme Edition 3960X is also cost-effective. The overall cost increase is not very large, but the rendering capabilities are further improved. Disadvantages: While obtaining powerful rendering capabilities, because it uses a civilian platform and does not support ECC memory, the stability and fault tolerance of the system are lower than those of professional workstations.
When doing large-scale rendering for a long time, the possibility of failure is higher. It is not suitable for large-scale rendering and is only suitable for small enterprises or self-employed businesses.
If you want to perform large-scale rendering, we recommend Dell Precision series professional graphics workstations, which can be equipped with single-channel Xeon or dual-channel Xeon or even higher performance.
i7-3960X is a third-generation I7 processor with LGA 2011 interface. It comes with only one motherboard specification: X79.
Supported, I7 3960X has LGA2011 pins and IVB-E architecture. It can only be used on X79 motherboards. It is not compatible with the latest X99 motherboards. X99 motherboards can support HASWELL-EP architecture CPUs
3970x has no future. The memory controller is integrated in the CPU and can only support ddr3, not ddr4. This is different from the 1151 processor. The 1151 memory controller supports ddr4 and ddr3L. , if the motherboard provides a ddr3 slot, you can use ddr3L. 3970x does not support it in the first place, so how can it have a future.
i73960X is a high-end processor suitable for use with high-performance memory modules. According to official data, the maximum memory size supported by this processor is 64GB, and the best operating frequency is DDR3-2400MHz. Therefore, in order to fully utilize the performance of i73960X, it is recommended to choose a DDR3-2400MHz memory stick and ensure that the memory size is at least 16GB. If you have sufficient budget, you can choose a larger memory module for better performance. It should be noted that in order to ensure system stability and compatibility, it is recommended to choose motherboard and memory module brands that are compatible with the processor.
A very powerful processor, it needs to be matched with a good board to bring out the best performance. It is recommended to use an original Intel motherboard.
The above is the detailed content of CNC powermill programming computer configuration?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
