php editor Xigua ASUS motherboard adjusts the wind speed in the bios by entering the bios settings interface, finding the fan control option, and then selecting manual mode to adjust the wind speed. In manual mode, the fan speed can be adjusted according to actual needs to achieve the best cooling effect. Adjusting the wind speed can help maintain the stable operation of the hardware while ensuring optimal cooling of the system.
Asus motherboard can set the CPU fan speed in the Monitor option in the BIOS. The specific setting steps are as follows:
1. After booting, press "DEL" or "F2" to enter the BIOS;
2. Use the right arrow key on the keyboard to select Monitor;
3. The CPUFANSpeed option under the Monitor tab is the setting of the CPU fan speed. After the settings are completed, click the F10 key to save the settings in the BIOS, and the machine will automatically restart.
Asus motherboard can set the CPU fan speed in the Monitor option in the BIOS. The specific setting steps are as follows:
1. After booting, press "DEL" or "F2" to enter the BIOS;
2. Use the right arrow key on the keyboard to select Monitor;
3. The CPUFANSpeed option under the Monitor tab is the setting of the CPU fan speed. After the settings are completed, click the F10 key to save the settings in the BIOS, and the machine will automatically restart.
You need to enable the Q-fan function in the BIOS.
Q-fan options include automatic and manual. Automatic adjustment can generally meet ordinary silent requirements. You can choose manual adjustment. Summer is coming and the temperature will be higher. You can set the starting temperature to 40℃ , the starting speed is 20% (this value is only a relative value, it depends on the fan. Some fans may only have a few hundred revolutions at 20%, and some may have 2 to 3000 revolutions. Try to find a satisfactory speed. ), the maximum temperature is 60 degrees Celsius. Asus' bios generally requires pressing the F2 or delete key when starting up, and pay attention to the boot prompts.
1.
First we need to determine what interface our chassis has. If it is a 3 PIN interface, then we find the fan socket on the motherboard, such as the SYS_FAN pin.
2.
If your chassis fan has a D-type port, you need to find the parallel port power supply interface in the power supply and insert it as follows. If there are multiple fans that can be connected in series, insert one fan on the interface.
3.
Also supports adapter transfer.
Asus fans are usually controlled through the ASUS Fan Xpert tool. This tool allows you to adjust the fan speed to improve system stability and reduce noise. The following are the steps to control the ASUS fan:
1. Download and install the ASUS Fan Xpert tool, which can be downloaded from the ASUS official website or the motherboard driver center.
2. Start the ASUS Fan Xpert tool and it will automatically detect the fans installed in your system.
3. Select the fan you want to control, and then click the "Settings" button to enter the parameter setting interface.
4. In the parameter setting interface, you can adjust the fan speed, set the fan curve, or select the option to automatically adjust the fan speed.
5. After completing the adjustment, click the "Apply" button to save the settings.
It should be noted that when adjusting the fan speed, be sure to keep the fan running within a safe range. Do not adjust the speed too high, causing overheating or excessive noise.
Asus computer fan mode can be adjusted in the cooling settings.
To turn off the case fan on your ASUS motherboard, follow these steps:
1. First, make sure the computer is turned off and unplugged from the power source.
2. Open the computer case and find the connection cable of the case fan. These wires usually connect to a 4-pin or 3-pin (PWM) fan socket on the motherboard.
3. Find the relevant jumper settings on the motherboard. Asus motherboards usually have a dedicated jumper setting for controlling the case fan. It may be located near the I/O panel, or near the CPU socket. This jumper is often referred to as the "chassis fan jumper" or "CHA FAN" jumper.
4. Change the chassis fan jumper setting to "Off" or "Zero Speed". The jumper settings may vary from motherboard to motherboard, but there will usually be a jumper labeled "1", "2", "3", and "4". If your jumpers are set to "1", rearrange them to "2". Likewise, if the jumpers are set to "2", rearrange them to "3". So on and so forth. This will stop the fan.
5. Reconnect the power and start the computer to see if the settings take effect.
Please note that turning off the case fan may cause the computer to overheat, especially under heavy load. Before turning off your case fan, make sure your computer's cooling system is powerful enough to prevent overheating issues.
Asus motherboard can set the CPU fan speed in the Monitor option in the BIOS. The specific setting steps are as follows:
1. Press "DEL" or "F2" to enter the BIOS after turning on the computer;
2. Use the right arrow key on the keyboard to select Monitor;
3. The CPU FAN Speed option under the Monitor tab is the setting of the CPU fan speed. After the settings are completed, click the F10 key to save the settings in the BIOS, and the machine will automatically restart.
The above is the detailed content of How to adjust the fan speed in the bios of an ASUS motherboard?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
