php editor Xinyi is here to introduce in detail how to check the motherboard information of the computer. Understanding your computer's motherboard is important for upgrading hardware, installing drivers, and troubleshooting hardware problems. There are many ways to view computer motherboard information, including using system information tools, viewing labels on the motherboard, or through the command line. Whether you are a beginner or an experienced user, you can easily find detailed information about your computer motherboard. Next, we will introduce these methods one by one to help you accurately view the motherboard information of your computer.
Method 1: First turn on the computer, click "Start", then a dialog box will pop up, just enter "DxDiag" in the dialog box, and then press the Enter key. Then a "DirectX Diagnostic Tool" dialog box will pop up, in which you can view the computer motherboard model information at will.
Method 2: In addition to the above method, you can also check the motherboard model through the Device Manager. The way to open it is to enter the "Control Panel" on the computer, and then select the "Hardware and Sound" item with the mouse. , select "Device Manager" in this project, and then a related interface will pop up. On this interface, you can also view the motherboard model information.
Method 3: In addition to checking the motherboard model information on the computer settings listed above, you can also use third-party software to check the motherboard model information. Just select some hardware testing tools for the software, such as aida64extreme , download and install it, and you can see the relevant hardware information after opening it.
Method 4: If you find the above three methods troublesome, you can view the model information of the host directly through the computer case. Take out the computer case directly or directly rotate it to a location to see the relevant information. motherboard model information. The hardware information on different brands of computer cases is posted in different locations. If you look carefully at the desktop computer, you will see it. If you use a notebook, you can use the above three methods.
The method to check the brand and model of the computer motherboard is as follows:
1. Open the computer main box and find the motherboard. The motherboard is usually located at the bottom of the computer chassis and is a large circuit board with many electronic components and slots on it.
2. Check the logo on the motherboard. There are usually brand and model logos printed on the motherboard, and these logos can be used to determine the brand and model of the motherboard. The location and form of the logo vary from motherboard to motherboard. Some motherboards have more obvious logos, while others are more subtle.
3. Use software to view. You can use some system information software to check the brand and model of the computer motherboard, such as CPU-Z, AIDA64, etc. These software can automatically identify computer hardware information and display detailed information such as the brand and model of the motherboard.
It should be noted that when checking the motherboard brand and model, you need to pay attention to safety and avoid touching the electronic components inside the computer to avoid electric shock or other damage.
The method to check the computer motherboard is as follows:
Method 1. Some motherboards are marked
Some motherboards are marked with the manufacturer's logo and product model, such as ASUS )TX97-LE. Some motherboards have the manufacturer's logo marked on the CPU heat sink, while the product model is marked elsewhere on the motherboard.
Method 2: View the startup screen
When the computer starts to perform self-test, you will see information about the motherboard and BIOS. The specific method is to press the Pause/Break key on the keyboard when the system detects the memory, so that the system's detection process will be paused. Usually the first line (or the first two lines) on the screen at this time is BIOS-related information. American Megatrends, Inc. is the name of the company that produces AMIBIOS; the next is the motherboard model, such as A5169MS, which means it is produced by MSI. For the MS-5169 motherboard, V2.2 indicates that the current version of AMIBIOS is 2.2.
Method 3. Enter the DirectX Diagnostic Tool to check the motherboard model
Enter the Start→Run dialog box from the desktop and enter dxdiag and press "OK" to enter the "DirectX Diagnostic Tool". If you enter When prompted, just press the Enter key to confirm entry. After entering the DirectX diagnostic tool page, you can see the motherboard model in the system information.
Method 4: Use Master Lu or Optimization Master, EVEREST and other hardware and software detection
Use Master Lu to check the motherboard model. The method of use is very simple. You only need to download a Master Lu, and then install and start it. , you can see the name and model of each computer hardware detected by Master Lu, among which the motherboard model is among them.
To check which motherboard model you are using, you can use the following methods:
1. Check the logo on the motherboard: Open the computer case and carefully observe the printed logo and brand on the motherboard and model number. Usually this information will be printed on the surface of the motherboard, especially near the PCI slots. You can record this information and search for more details.
2. Use the system information tool: In the Windows operating system, you can use the system information tool to view the motherboard information. Press the Win R key, enter "msinfo32" in the Run dialog box, and click OK. In the system information window, expand the "System Summary" on the left and find the "Basic Board" (or similar name) column. You can find the manufacturer and model information of the motherboard on the right.
3. Use third-party tools: In addition to system information tools, there are also some third-party software that can be used to view motherboard information. For example, CPU-Z and Speccy are popular free software that provide detailed reports on motherboard manufacturers, models, and other hardware information.
4. Reference the purchase invoice or packaging box: If you still have the purchase invoice or packaging box of your computer motherboard, you can find the motherboard's detailed information on it, including the brand and model.
It should be noted that the location and viewing method of the motherboard model may vary depending on the motherboard manufacturer. If you can't find an obvious sign or can't get the information using the above methods, we recommend consulting a computer repair professional or contacting the motherboard manufacturer's customer support for more help.
The motherboard model can be viewed through the following two methods. Please see the specific operations below:
Method 1:
1. Press and hold the win R key combination to open.
2. Enter cmd and click OK.
3. Enter systeminfo and press Enter.
4. Find the system model, which is the motherboard model.
Method 2:
1. Press and hold the win R key combination to open.
2. Enter dxdiag and click OK to enter the DirectX diagnostic tool interface.
3. Find the system model, which is the motherboard model.
Warm reminder: In addition to opening through the shortcut key win R, you can also enter run in the search box on the lower left side of the computer, and then click run to open run.
You can check the motherboard model by entering bios
1 Press and hold the computer power button
2After the startup screen appears, keep pressing F9
3The following picture appears page, press F10
4 Enter the administrator password
5 Go into bios and find the motherboard. The numbers and letters on the right are the motherboard model.
The above is the detailed content of How to check the computer's motherboard information?. For more information, please follow other related articles on the PHP Chinese website!
How to solve the invalid mysql identifier error
How to delete blank pages in word without affecting other formats
js split usage
stripslashes function usage
How to copy an Excel table to make it the same size as the original
Introduction to the use of vscode
Linux adds update source method
Basic usage of insert statement
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
