How to turn up computer volume

What to do if the computer sound is too low

It may be caused by the following reasons:

Incorrect insertion of the card may result in the sound card not being fully integrated with the motherboard expansion slot, and the "golden fingers" and expansion slot reeds may be misaligned visually. This situation is common with ISA cards or PCI cards, but the problem can be solved by inserting the correct sound card.

The input terminal of the active speaker should be connected to the Speaker output terminal of the sound card, not the Line-Out terminal of the sound card. The advantage of this is that the signal received by the active speaker is not amplified by the sound card, so the noise will be much smaller. Some sound cards have only one output. Whether it is Line-Out or Speaker depends on the jumper settings on the card. The default setting is usually Speaker, so if necessary, you need to unplug the sound card and adjust the jumper settings.

If the sound card driver version you installed is not good, it may be because you are using the driver that comes with the system. In order to obtain better sound effects, it is recommended that you install a special sound card driver. If you have installed the driver that comes with Windows, you can change it by following the steps below: 1. Open Control Panel, select System, and then click Device Manager. 2. In Device Manager, find Sound, Video and Game Controllers and click to expand. 3. Select each device, right-click and select Properties. 4. In the Properties window, select the Drivers tab and click Change Driver. 5. Select Install driver from disk. 6. Insert the disk or CD that came with the sound card, and then install the driver provided by the manufacturer. Through the above steps, you can install a specialized sound card driver for a better audio experience.

What to do if the computer sound is too low

Let’s debug it

The steps to debug the microphone are as follows: Open the control panel and enter the high-definition audio configuration. In the mixer options, click Replay, then click the little wrench icon. Mute the Rear pin kIn option on the right and push all other options up. Next, click Record and click the little wrench icon again. Select all options and click OK. Finally, in the stereo mix options, mute it. The above are the brief steps to debug the microphone.

Based on the guidelines you provided, you can adjust the audio properties by following these steps: 1. Right-click the small speaker in the lower right corner and select "Volume Adjustment". 2. In the volume adjustment window, find the "Device Volume" option and click "Advanced". 3. In the Advanced Volume Control window, push the Master Volume all the way up. 4. Click "Options" and select "Properties". 5. In the properties window, check "Microphone Volume" and click "OK". 6. Return to the options window and click "Advanced Controls". 7. In the advanced control window, check the "Microphone Enhancement" option. In this way, you have completed fine-tuning the audio properties.

How to use mixing and microphone at the same time: Right-click the small speaker, select Adjust Audio Properties, and then click Voice Options. Find the options button below the recording volume, click it to enter the property settings. Check the Stereo Mix option in the property settings, and finally click OK to save the settings.

How to operate if there is no sound on the webpage: Open the webpage--Tools--Options--Advanced--(check) Play the sound in the webpage.

How to make the headphones louder in the game: Control Panel---High Definition Audio Configuration--Audio I/O--Headphones--Select 8CH Speaker.

How to display the small speaker in the lower right corner: Start---Settings---Control Panel---Sounds and Audio Devices--Volume--(check) put the volume icon into the taskbar.

The above is the detailed content of How to turn up computer volume. For more information, please follow other related articles on the PHP Chinese website!