Nowadays, it is very common to have two laptops at home, and most Centrino are equipped with wireless network cards. Some people want to interconnect the two computers to share information, or many people need to share the Internet, so wireless dual computers appear. Internet issues. How can two laptops share wireless connections without using wireless routers or wireless APs, but only using wireless network cards? The author will solve this problem for everyone.
Wireless dual-machine interconnection configuration
We are on a computer's Network Neighborhood, right-click and select "Properties", as shown in the figure below.
First, we need to open the "Network Connection" window, then right-click the wireless network card we want to set up sharing and select "Properties". A window will pop up as shown below. Next, we can make further settings.
In order to connect the wireless network card of a laptop or desktop, we need to make some settings. First, set the IP address in the "General" tab of the wireless network connection item properties dialog box. Make sure that the two machines are set to the same network segment, for example, set to "192.168.1.X" (where X can be any value between 0 and 255), and the subnet mask is set to 255.255.255.0. This will allow you to successfully connect to the wireless network.
Next, we need to click on the "Wireless Network Configuration" tab. Then, under this tab, select the "Use Windows to configure my wireless network settings" checkbox to activate other configuration options below. This step is very important to ensure that we can perform subsequent setup operations correctly.
3) If you want to add a new wireless network, click the "Add" button in the dialog box that opens as shown below. Select the "Add" button below, and the window as shown below will pop up. Fill in the name you like in the service name (SSID). Note that it cannot be in Chinese. Other computers will see this name when looking for this point-to-point connection. We Write grfwgr here. Then make relevant settings in the page that opens.
First, we need to configure the wireless network SSID to ensure that it is consistent with the SSID configured on the wireless network card. Next, configure the same security options as the wireless network card under the "Wireless Network Key" item. Also, select the "This is a computer-to-computer (ad hoc) network; no wireless access point (C) is used" checkbox. These steps will help resolve the issue and successfully connect to the wireless network.
To configure IEEE 802.1x authentication, follow these steps: 4) Select the "Verification" tab in the dialog box, as shown in the figure below.
During this process, you can choose one of two IEEE 802.1x authentication methods. If you select the "Smart card or other certificate" option, then you must have a smart card or computer certificate installed. Normally there is no need to configure IEEE 802.1x authentication.
5) In the "Connection" tab, just check Allow the computer to automatically connect to the configured wireless network, very simple. After the configuration is completed, click the "OK" button to return to the dialog box shown in step 1.
In the dialog box shown in (Step 1), click the "Advanced" button to open a dialog box similar to the one below.
In the dialog box, change the type of wireless network you are connecting to from "Any available network" to "Computer-to-computer only" and also turn off the "Automatically connect to non-preferred networks" option. When finished, click the "OK" button to return to the previous dialog box.
7) On another laptop, right-click the wireless network connection status indicator icon on the right side of the taskbar again. At this time, you can find that there is already a "Connect to a Wireless Network" dialog box that pops up. Another flag we set, in this article is the available wireless network of "grfwgz", select it and put a "√" in front of the "Allow me to connect to the selected wireless network even if it is unsecured" option, and then click "Connect" button.
When you point your mouse at the wireless network connection status indicator icon on the taskbar, you can see information about the wireless connection between the two laptops, such as connection speed and signal strength.
For ease of use, we can set two laptops to the same workgroup. Open "Network Neighborhood" and you will see the icons of the two machines including each other. After setting the hard drive or folder that needs to be exchanged as shared, two laptops can easily exchange data.
Note: For operating systems before Windows XP, in order to ensure that the channels of the wireless network adapter are consistent, the following settings are also required. For Windows 2000 operating system, you can modify the channel value in the properties of the network adapter. This ensures system compatibility and stability.
In fact, you can also check the "Automatically connect to non-preferred networks" check box in the "Advanced" tab in the wireless network connection properties configuration dialog box. In this way, the laptop will automatically search for available networks and connect to them.
First, open your wireless network connection properties. You can find it by right-clicking the network icon in the system tray and selecting "Open Network and Internet Settings." Next, in the network settings interface, click "Wireless Network Configuration". Then, in the pop-up window, click the "Advanced" option in the lower right corner. In the advanced options you will see an option called "Computer to computer only", check it. Also, scroll down and you will also see an option called "Automatically connect to non-preferred networks", check it as well. After completing the above operations, your wireless network connection
After closing, return to "Wireless Network Configuration", click "Add" and enter your LAN name (such as "HOME"), then change the "Data Encryption" option to "Disabled", and finally click OK.
Next, we need to enter the property settings of the wireless network card. In the properties, set the IP address to 192.168.0.1, the subnet mask to 255.255.255.0, and leave the rest of the options unchanged. Such a setup will help us solve the problem.
To help other computers set up, just follow the steps above to make the same settings, except you need to set the IP to something else, or choose to obtain an IP automatically. This completes the setup.
4. Right-click the wired network card on the host, select "Properties", and then click the "Advanced" option. Here, check "Allow other network users to connect through this computer's INTERNET connection". This will help players who have not yet passed the level solve their problems.
wish you success!
In order to solve the problem, you first need to enable the wireless network cards of both laptops in the BIOS or other management programs.
2.Set the wireless connection method. Right-click the wireless network connection status indicator icon on the right side of the taskbar, select "View Available Wireless Connections", click "Advanced" in the pop-up dialog box, enter the "Wireless Network Connection Properties" page, and select "Wireless Network Connection Properties". Network Configuration" option, click the "Advanced" button in the lower right corner, and change the "Networks to access" option in the page that appears, that is, change "Any available network" to "Computer to computer only", press " Close" to end this step. This step is required for both laptops.
To solve this level, follow these steps: 1. Find and open the "Wireless Network Configuration" page on your laptop. 2. Find the "Add" button under "Preferred Networks" and click it. 3. When the "Wireless Network Properties" window pops up, enter a flag in the "Service Settings Flag (SSID)" column. 4. Click the "OK" button in sequence to exit the settings. By following the above steps, you will be able to successfully solve this puzzle. Hope this helps!
4. On another laptop, right-click the wireless network connection status indicator icon on the right side of the taskbar again. At this time, you can find that there is already a "Connect to a Wireless Network" dialog box that pops up. A flag of available wireless networks, select it and put a "√" in front of the "Allow me to connect to the selected wireless network even if it is unsecured" option, and then click the "Connect" button. When you point your mouse at the wireless network connection status indicator icon on the taskbar, you can see information about the wireless connection between the two laptops, such as connection speed and signal strength.
For ease of use, we can set two laptops to the same workgroup. Open "Network Neighborhood" and you will see the icons of the two computers including each other. After setting the hard drive or folder that needs to be exchanged as shared, data can be exchanged between two laptops. In this way, you can easily solve the problem of data transmission.
The above is the detailed content of How to establish a wireless dual-machine connection between two laptops. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
