How to achieve keepalived+nginx high availability-Nginx-php.cn

1.Keepalived introduction

keepalived was originally designed for the lvs load balancing software to manage and monitor the status of each service node in the lvs cluster system. It was later added Implement highly available vrrp function. In addition to managing LVS software, keepalived can also support high-availability solutions for other services.

keepalived implements high availability function through vrrp protocol. vrrp (virtual router redundancy protocol) virtual router redundancy protocol. The purpose of vrrp is to solve the single point of failure problem of static routing. It can ensure that when individual nodes go down, the entire network can run uninterrupted.

2. Keepalived high-availability failover principle

Failover between keepalived high-availability services is achieved through vrrp. When the keepalived service is working, the master node will continuously send (multicast) heartbeat messages to the backup node to tell the backup node that it is still alive.

When the master node fails, heartbeat messages cannot be sent to the backup node. If the backup node cannot continue to detect the heartbeat from the master node. It will call its own takeover program to take over the IP resources and services of the master node. When the primary node recovers, the standby node will release the IP resources and services it took over when the primary node failed, and return to its original standby role

3. Install nginx

3.1. Master node (192.168.80.22)

3.1.1. Install compilation tools and library files

yum -y install make zlib zlib-devel gcc-c++ libtool openssl openssl-devel

Copy after login

3.1.2. Install pcre

#进入目录
cd /usr/local/develop/anginx

#上传安装文件并解压
tar -zxvf pcre-8.38.tar.gz

#进入安装目录
cd pcre-8.38

#检查配置
./configure

#编译、安装
make && make install

#查看pcre版本
pcre-config --version

Copy after login

3.1.3. Install nginx

#进入目录
cd /usr/local/develop/anginx

#上传安装文件，并解压
tar -zxvf nginx-1.8.1.tar.gz

#进入安装目录
cd nginx-1.8.1

#检查配置
./configure --prefix=/usr/local/develop/anginx/webserver/nginx --with-http_stub_status_module --with-http_ssl_module --with-pcre=/usr/local/develop/anginx/pcre-8.38

#编译安装
make && make install

#查看nginx版本
 /usr/local/develop/anginx/webserver/nginx/sbin/nginx -v
--------------------------------------------------------
[root@hadoop02 webserver]# /usr/local/develop/anginx/webserver/nginx/sbin/nginx -v
nginx version: nginx/1.8.1

#配置nginx（检查）
/usr/local/develop/anginx/webserver/nginx/sbin/nginx -t

#nginx管理命令
/usr/local/develop/anginx/webserver/nginx/sbin/nginx       # 启动 nginx
/usr/local/develop/anginx/webserver/nginx/sbin/nginx -s stop       # 停止 nginx
/usr/local/develop/anginx/webserver/nginx/sbin/nginx -s reload      # 重新载入配置文件
/usr/local/develop/anginx/webserver/nginx/sbin/nginx -s reopen      # 重启 nginx

Copy after login

3.1.4.nginx basic configuration

vi nginx.conf

#user nobody;
worker_processes 1;

#error_log logs/error.log;
#error_log logs/error.log notice;
#error_log logs/error.log info;

pid    logs/nginx.pid;


events {
  worker_connections 1024;
}


http {
  include    mime.types;
  default_type application/octet-stream;

  log_format main '$remote_addr - $remote_user [$time_local] "$request" '
           '$status $body_bytes_sent "$http_referer" '
           '"$http_user_agent" "$http_x_forwarded_for"';

  access_log logs/access.log main;

  sendfile    on;
  #tcp_nopush   on;

  #keepalive_timeout 0;
  keepalive_timeout 65;

  #gzip on;
  
  #添加tomcat列表，真实应用服务器都放在这
  upstream tomcat_pool{
    #server tomcat地址:端口号 weight表示权值，权值越大，被分配的几率越大;
    server 192.168.80.22:8080 weight=4 max_fails=2 fail_timeout=30s;
    server 192.168.80.22:8081 weight=4 max_fails=2 fail_timeout=30s;
    
  }

  server {
    listen    80;
    server_name tomcat_pool;

    #charset koi8-r;

    #access_log logs/host.access.log main;

    location / {
      #root  html;
      #index index.html index.htm;
      proxy_pass http://tomcat_pool;  #转向tomcat处理
      proxy_set_header  host       $host;
      proxy_set_header  x-real-ip    $remote_addr;
      proxy_set_header  x-forwarded-for $proxy_add_x_forwarded_for;
    }

    #error_page 404       /404.html;

    # redirect server error pages to the static page /50x.html
    #
    error_page  500 502 503 504 /50x.html;
    location = /50x.html {
      root  html;
    }


}

Copy after login

3.2. Standby node (192.168.80.21)

Instructions : The installation method is the same as the nginx master node.

4. Install keepalived

4.1. Master node (192.168.80.22)

#安装keepalived
yum install keepalived -y

#启动keepalived服务
/etc/init.d/keepalived start
-------------------------------------------
[root@hadoop02 anginx]# /etc/init.d/keepalived start
正在启动 keepalived：                   [确定]
[root@hadoop02 anginx]# ps -ef |grep keepalived
root   15723   1 0 00:59 ?    00:00:00 /usr/sbin/keepalived -d
root   15724 15723 0 00:59 ?    00:00:00 /usr/sbin/keepalived -d
root   15725 15723 0 00:59 ?    00:00:00 /usr/sbin/keepalived -d
root   15731 15622 0 00:59 pts/1  00:00:00 grep keepalived
[root@hadoop02 anginx]#

#设置开机自启动
echo "/etc/init.d/keepalived start" >>/etc/rc.local

#关闭keepalived服务
/etc/init.d/keepalived stop

#编辑keepalived配置文件
vi /etc/keepalived/keepalived.conf

-----------------------------------------------------------
! configuration file for keepalived

global_defs {
  notification_email {
   [email protected]
   [email protected]
   [email protected]
  }
  notification_email_from [email protected]
  smtp_server 192.168.200.1
  smtp_connect_timeout 30
  router_id lb01
}

vrrp_instance vi_1 {
  state master
  interface eth1
  virtual_router_id 55
  priority 150
  advert_int 1
  authentication {
    auth_type pass
    auth_pass server123
  }
  virtual_ipaddress {
    192.168.80.100 dev eth1 label eth1:1
  }
}
...........................................................

Copy after login

About configuration instructions:

[router_id] is the routing identifier, which should be unique in a LAN

[vrrp_instance vi_1]{...}This It is a vrrp instance, which defines the active and backup status, interface, priority, authentication and IP information of keepalived
[state] defines the role of vrrp
[interface] Define the interface used. The network cards used by my server here are all eth1
[virtual_router_id] is the virtual routing id identifier, which is in a set of keepalived configurations The active and standby settings are consistent
[priority] is the priority. The larger the number, the greater the priority.
[auth_type] is Authentication method
[auth_pass] is the password for authentication

[virtual_ipaddress] {...} Define the virtual ip address, you can Configure multiple IP addresses, here I define it as 192.168.80.100, bound to the network interface of eth1, virtual interface eth1:1

4.2. Standby node (192.168.80.21 )

#安装keepalived
yum install keepalived -y

#启动keepalived服务
/etc/init.d/keepalived start
-------------------------------------------
[root@hadoop02 anginx]# /etc/init.d/keepalived start
正在启动 keepalived：                   [确定]
[root@hadoop02 anginx]# ps -ef |grep keepalived
root   15723   1 0 00:59 ?    00:00:00 /usr/sbin/keepalived -d
root   15724 15723 0 00:59 ?    00:00:00 /usr/sbin/keepalived -d
root   15725 15723 0 00:59 ?    00:00:00 /usr/sbin/keepalived -d
root   15731 15622 0 00:59 pts/1  00:00:00 grep keepalived
[root@hadoop02 anginx]#

#设置开机自启动
echo "/etc/init.d/keepalived start" >>/etc/rc.local

#关闭keepalived服务
/etc/init.d/keepalived stop

#编辑keepalived配置文件
vi /etc/keepalived/keepalived.conf

-----------------------------------------------------------------
! configuration file for keepalived

global_defs {
  notification_email {
   [email protected]
   [email protected]
   [email protected]
  }
  notification_email_from [email protected]
  smtp_server 192.168.200.1
  smtp_connect_timeout 30
  router_id lb02
}

vrrp_instance vi_1 {
  state backup
  interface eth1
  virtual_router_id 55
  priority 100
  advert_int 1
  authentication {
    auth_type pass
    auth_pass server123
  }
  virtual_ipaddress {
    192.168.80.100 dev eth1 label eth1:1
  }
}
.............................................................

Copy after login

5. Test

5.1. Start the keepalived service of the active and backup nodes

#在节点一执行（192.168.80.22）
/etc/init.d/keepalived start
-------------------------------------
[root@hadoop02 anginx]# ps -ef |grep keepalived
root   15788   1 0 01:09 ?    00:00:00 /usr/sbin/keepalived -d
root   15790 15788 0 01:09 ?    00:00:00 /usr/sbin/keepalived -d
root   15791 15788 0 01:09 ?    00:00:00 /usr/sbin/keepalived -d
root   15807 15622 0 01:33 pts/1  00:00:00 grep keepalived
[root@hadoop02 anginx]#


#在节点二执行（192.168.80.21）
/etc/init.d/keepalived start
---------------------------------------
[root@hadoop01 ~]# ps -ef |grep keepalived
root   11542   1 0 01:30 ?    00:00:00 /usr/sbin/keepalived -d
root   11544 11542 0 01:30 ?    00:00:00 /usr/sbin/keepalived -d
root   11545 11542 0 01:30 ?    00:00:00 /usr/sbin/keepalived -d
root   11550 11512 0 01:33 pts/1  00:00:00 grep keepalived
[root@hadoop01 ~]#

Copy after login

5.2. Access the service through virtual ip

http://192.168.80.100/session-redis-demo/

How to achieve keepalived+nginx high availability

5.3. Stop the host Node keepalived service

#在节点一执行（192.168.80.22）
/etc/init.d/keepalived stop

#观察备节点变化
ip addr
-------------------------------------------
[root@hadoop01 ~]# ip addr
1: lo:  mtu 65536 qdisc noqueue state unknown 
  link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  inet 127.0.0.1/8 scope host lo
  inet6 ::1/128 scope host 
    valid_lft forever preferred_lft forever
2: eth1:  mtu 1500 qdisc pfifo_fast state up qlen 1000
  link/ether 00:50:56:38:e5:46 brd ff:ff:ff:ff:ff:ff
  inet 192.168.80.21/24 brd 192.168.80.255 scope global eth1
  inet 192.168.80.100/32 scope global eth1:1
  inet6 fe80::250:56ff:fe38:e546/64 scope link 
    valid_lft forever preferred_lft forever
[root@hadoop01 ~]#

Copy after login

5.4. Continue to access the service through virtual ip

http://192.168.80.100/session-redis-demo/

How to achieve keepalived+nginx high availability

6.keepalived nginx integration

Instructions: Write an nginx daemon script. If the nginx service fails, stop the keepalived service of the current node. Automatically switches to the backup node.

6.1. Write nginx daemon script

vi nginx_check.sh

--------------------------------------
#!/bin/bash
while true
do
if [ $(netstat -tlnp|grep nginx|wc -l) -ne 1 ]
then
  /etc/init.d/keepalived stop
fi
sleep 2
done

#给脚本授权
chmod u+x nginx_check.sh

#执行脚本
nohup /usr/local/develop/anginx/shell/nginx_check.sh &

Copy after login

6.2. Stop the main node nginx service

#停止主节点nginx服务
/usr/local/develop/anginx/webserver/nginx/sbin/nginx -s stop

#查找进程
[root@hadoop02 ~]# ps -ef |grep nginx
root   15915   1 0 01:51 ?    00:00:00 /bin/bash /usr/local/develop/anginx/shell/nginx_check.sh
root   16516 15753 0 01:54 pts/5  00:00:00 grep nginx
[root@hadoop02 ~]#

#观察备用节点变化【服务正常】
ip addr
--------------------------------------
[root@hadoop01 shell]# ip addr
1: lo:  mtu 65536 qdisc noqueue state unknown 
  link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  inet 127.0.0.1/8 scope host lo
  inet6 ::1/128 scope host 
    valid_lft forever preferred_lft forever
2: eth1:  mtu 1500 qdisc pfifo_fast state up qlen 1000
  link/ether 00:50:56:38:e5:46 brd ff:ff:ff:ff:ff:ff
  inet 192.168.80.21/24 brd 192.168.80.255 scope global eth1
  inet 192.168.80.100/32 scope global eth1:1
  inet6 fe80::250:56ff:fe38:e546/64 scope link 
    valid_lft forever preferred_lft forever
[root@hadoop01 shell]#

#再次重新启动主节点nginx和keepalived服务
/usr/local/develop/anginx/webserver/nginx/sbin/nginx

/etc/init.d/keepalived start

Copy after login

The above is the detailed content of How to achieve keepalived+nginx high availability. For more information, please follow other related articles on the PHP Chinese website!