What does network ms mean?

Network ms refers to the data delayed by the network in ms (milliseconds). ms in the network refers to milliseconds, and the ms value represents the delay of the network. If the ms value is higher, it means that the current network delay is serious, and users will experience lag when playing games; if the ms value is lower, it also means that the network delay is serious. This means that the network condition is smooth.

The operating environment of this tutorial: Windows 7 system, Dell G3 computer.

What does network ms mean

Network ms refers to the data delayed by the network in ms (milliseconds).

Network ms generally refers to the term used when measuring network conditions in online games. It means "millisecond". The full name is millisecond, which represents the network delay between two computers. Generally The smaller this value is, the better.

The round-trip time when a data packet is sent from the user's device to the speed measurement point, and then immediately returned from the speed measurement point to the user's device. It is also commonly known as "network delay" and is generally calculated in milliseconds (ms). ms in the network refers to milliseconds.

# The ms value represents the network delay. If the ms value is higher, it means that the current network delay is serious and users will experience lag when playing games. If the ms value is lower, it means the network condition is smooth.

What is the network delay in milliseconds?

The network delay is 100ms or less. normal.

• 1~30ms: Extremely fast, almost no noticeable delay, and playing any game is extremely smooth.

• 31~50ms: Good, you can play the game normally without any obvious delay.

• 51~100ms: Normal, in confrontational games above a certain level, you can feel delays and occasional pauses.

• 100ms~200ms: Poor, unable to play confrontational games normally, with obvious lagging, and occasional packet loss and disconnection.

• 200ms~500ms: Very poor. There are obvious delays and freezes when accessing web pages. Packet loss or inaccessibility often occurs.

• >500ms: Extremely poor, unacceptable delay and packet loss, even unable to access the web page.

• >1000ms: Basically inaccessible.

Calculation method: 1 second = 1000 milliseconds (for example: 30ms is 0.03 seconds)

What is the reason for high network latency?

High network latency simply means the time it takes for transmission in the transmission medium, that is, the time between when a message starts entering the network and when it starts leaving the network is long. Under normal circumstances, when the MS of pinging local DNS exceeds 100MS, it means that the network delay is already relatively high.

Network delay refers to the transmission of various data through network protocols (such as TCP/IP) in network media. If the amount of information is too large and not restricted, excessive network traffic will cause the device to react Slow, causing network delays.

High network latency may be due to the following reasons:

• There are too many routing hops between the local machine and the server

  Since the transmission speed of light and electricity is very fast, their propagation time in the physical medium is almost negligible, but the processing time of the router forwarding data packets is not negligible. When there are too many routes to forward in the link from the local machine to the server When processing, network latency will be apparent.

• Insufficient network bandwidth

  Excluding other factors, if the client and server are directly connected through a router, but the bandwidth is only 10Kbps, there are multiple applications that need to be transmitted at the same time. The amount of data far exceeds the bandwidth of 200Kbps, which will cause a large amount of data loss, which will manifest as a response delay.

• Insufficient processing bandwidth

  Excluding other factors, if the client and server are directly connected through a router, and the bandwidth is sufficient, but the server-side processing capability is insufficient, it will also Causes response delay, you can turn off the positioning function in Windows computers to reduce the delay.

For more computer-related knowledge, please visit theFAQcolumn!

The above is the detailed content of What does network ms mean?. For more information, please follow other related articles on the PHP Chinese website!