The computer engraving machine is a small CNC processing machine tool used to produce plane engraving and cutting of various materials. If you are considering buying or using a computerized cutting plotter, you first need to understand the steps to install and use it. PHP editor Xigua will give you a detailed introduction to the installation and use guide of the computer cutting plotter to help you get started easily and achieve efficient operation.
1, if there is a shelf, install the shelf first;
2, connect the computer data cable;
3, install the driver, software, and set the software parameters;
4. The cutting plotter begins to install materials, install the plotting knife, and debug and test the knife pressure;
5. The computer begins to send data and the plotting plotter performs its work. . . Kebao cutting plotter provides video tutorials and operating instructions, which are simple, teachable, and easy to use.
A computer engraving machine is a device used to engrave characters on various items (such as wood, metal, plastic, etc.). When using it, you need to connect it to a computer and follow the steps below:
1. Install the driver: Insert the driver CD or USB interface that comes with the computer cutting plotter into the computer and follow the prompts to install it. If the CD driver has expired, you can go to the manufacturer's official website to download the latest driver.
2. Open the design software: After installing the driver, open the design software that comes with the device (such as Artcut, etc.), or use other professional design software (such as Coreldraw, etc.) to design.
3. Design and typesetting: Perform font setting, typesetting and other design work in the design software. After completion, save the design file in a specific format (such as dxf format).
4. Upload files: Open the cutting plotter control panel and upload the design files to the cutting plotter through a specific transmission method (such as USB interface, serial port, etc.).
5. Start engraving: Place the items that need to be engraving on the engraving machine, fix the engraving needle to the appropriate height, adjust the engraving depth and speed and other parameters, start the engraving machine and start engraving.
6. Complete the work: After the engraving is completed, remove the items and process them, such as cleaning, painting, etc.
It should be noted that you should be careful when operating the computer cutting plotter and strictly follow the instruction manual to avoid safety problems.
Before engraving and outputting, make sure that the cutting plotter is online (i.e. the green light is on)./The offline light is not on. 2. The "Configure plotting machine" menu will pop up when engraving and outputting for the first time ( Or click "Engraving Equipment" in the "Engraving Output" menu to enter the "Configuration Engraving Machine" menu)
: 3. Select
,5. Click the white box behind "Connect to" and select
, 6. Click "Settings" to pop up the "Plotter Settings" menu, 7. Select the second and third items in the [Stream Control] column , do not select the first item, 8. Click "OK", click "Yes" in the pop-up "Wentai Engraving/Engraving 2002" menu, return to the "Engraving Output" menu, 9. Click "Engraving Output", Click "Start" in the pop-up "Output To Cutter" menu, and the plotter starts working (if it does not output, select serial port 2 and redo items 5 to 9). 10. When using Windows XP and Windows 2000 operating systems, if it can output, but random engraving occurs, please refer to page 11 of the Hongfan cutting plotter manual to change the port attributes. Ⅱ. Pickup plotting plotter: / Fengshen plotting plotter: 1. Before engraving and outputting, ensure that the plotting plotter is online (LCD Display "ONLINE"). 2. The "Configure Engraving Machine" menu will pop up when engraving and outputting for the first time (or click "Engraving Equipment" in the "Engraving Output" menu to enter the "Configure Engraving Machine" menu): 3 .Select
,6. Click "Settings", and the "Plotter Settings" menu will pop up. 7. Select the second and third items in the [Flow Control] column, and leave the first item unchecked. 8. Click "OK", and in the pop-up "Wen Tai Click "Yes" in the "Engraving/Engraving 2002" menu, return to the "Engraving Output" menu, 9. Click "Engraving Output", click "Start" in the pop-up "Output To Cutter" menu, and the engraving machine starts Work (if there is no output, select serial port 2 and redo items 5 to 9).
How to connect the cutting plotter to the computer? First install the driver software and program, and then connect the cutting plotter to the computer. The old one is the parallel port cable, and the new one is USB. You can follow the step-by-step operation from the Add Hardware Wizard. Introduction to use It's too troublesome. It is recommended to read the manual or ask the manufacturer. One thing to note is that the knife pressure can be adjusted from light to high to see which one is more suitable, otherwise it will easily damage the machine.
Pick up the chassis and lay it flat, grab the handle of the chassis baffle with your hand, pull it back, and the chassis baffle will be taken out.
1. Prepare tools and materials: You need to prepare all the tools and materials needed to assemble a computer host. This includes the computer host itself, monitor, keyboard and mouse, power supply, hard drive, memory stick, processor and radiator,
2. Open the host box: First, you need to open the host box for subsequent steps installation work. Usually, you can use a screwdriver to turn the screws on the corners of the main case, and then open the main case.
3. Install the power supply: The power supply is an important part of the computer host.
Put the three major pieces together normally, stuff them into the main case, hang them on the Philips monitor, light them up, and it should be OK!
Seven major steps:
1/7 step-by-step reading
Prepare tools and materials: You need to prepare all the tools and materials needed to assemble a computer host. This includes the computer host itself, monitor, keyboard and mouse, power supply, hard drive, memory stick, processor and radiator, motherboard, optical drive and other accessories.
2/7
Open the main chassis: First, you need to open the main chassis for subsequent installation work. Usually, you can use a screwdriver to turn the screws on the corners of the main case, and then open the main case.
3/7
Install the power supply: The power supply is an important part of the computer host. It is responsible for providing power to the computer host. You need to install the power supply inside the main case and connect it to the motherboard.
4/7
Install the motherboard: The motherboard is the core component of the computer host and is responsible for connecting all hardware devices. You need to install the motherboard inside the main case and connect it to the power supply and other hardware devices.
5/7
Install the memory module: The memory module is an important part of the computer host. It is responsible for storing data and speeding up the computer. You need to install the memory stick into the memory slot on the motherboard and make sure the memory stick is securely in place.
6/7
Install the processor and radiator: The processor is the core component of the computer host and is responsible for processing all instructions of the computer. The role of the heat sink is to help dissipate heat from the processor to prevent it from overheating. You need to install the processor into the processor socket on the motherboard and install the heat sink over the processor.
7/7
Install the hard disk and optical drive: The hard disk is an important part of the computer host and is responsible for storing data. The optical drive is an accessory of the computer host and is responsible for reading the data on the optical disc. You need to install the hard drive and optical drive in the hard drive cage or optical drive slot inside the main case and connect them to the motherboard.
Step 1 of assembling a computer
The first is the installation of the chassis, which mainly involves unpacking the chassis and installing the power supply in the chassis, then installing the motherboard and installing the motherboard on the chassis motherboard , assemble the computer and then install the CPU, insert the required CPU into the motherboard processor socket, and install the cooling fan, assemble the memory module in the computer, and insert the memory module into the motherboard memory slot.
Assemble the computer step 2
The next step is to install the graphics card, select the appropriate slot according to the graphics card bus; assemble the computer and install the sound card. Most of the mainstream sound cards in the market now are sound cards with PCI slots; The installation of drives mainly focuses on the installation of hard disks, optical drives and floppy drives; then there is the assembly of the connections between the computer chassis and the motherboard, that is, various indicator lights and power switch wires. The connection of PC speakers, as well as the connection of power cables and data cables of hard disk, optical drive and floppy drive.
Step 3 of assembling a computer
The third step of assembling a computer is to close the chassis cover. Theoretically, after installing the host, you can close the chassis cover, but in order to avoid problems later For inspection, it is best not to cover it first, and then cover it after the system is installed. Then there is the installation of input devices. When assembling the computer, you also need to connect the keyboard and mouse to integrate with the host; the installation of output devices, that is, the installation of the monitor; and then Recheck each wiring connection and prepare for testing.
Step 4 of Assembling a Computer
Assemble the computer and power up the machine. If the monitor can display normally, it means that the initial installation has been correct. At this time, enter the BIOS for initial system settings. After completing the above steps of assembling the computer, the general hardware installation is basically completed, but to make the computer run, the following installation steps are required.
Step 5 of assembling a computer
The next step is to assemble the computer's partitioned hard drive, format the hard drive, and install the operating system, such as Windows 98 or Windows XP. After assembling the computer and installing the operating system, install the drivers, such as graphics card, sound card and other drivers; perform a 72-hour baking period. If there is a hardware problem, it will be discovered during the 72-hour baking period.
The steps to assemble a computer are as follows: 1. In the first step, open all the accessories and open the chassis.
2. The second step is to install the CPU and CPU fan, and place the memory module in the corresponding card slot.
3. In the third step, first install the motherboard foot nuts, and then place the motherboard into a stable chassis to secure it.
4. The fourth step is to arrange the cable according to the instruction manual.
5. The fifth step is to connect the power supply and the host assembly is completed.
6. The sixth step is to connect the host and the monitor. First connect the VGA cable to the monitor, and then fix the two screws at the back.
7. Step 7. After the fixation is completed, connect the other end of the VGA cable to the computer host.
8. The eighth step is to connect the power cord to the monitor, and the computer assembly process is basically completed.
The steps are as follows:
1. First, prepare all the accessories of the wireless mouse, including: a wireless mouse, 2 batteries matching the wireless mouse, and a USB plug-in for the mouse.
2. The next step is to install the mouse battery. First, gently open the mouse cover. Note: Just lift it gently from the high-curved tail of the mouse. Do not lift it from the scroll wheel (left and right buttons) to avoid damaging the mouse.
3. After opening the mouse cover, you can see that there are two battery slots on the left and right inside. The above prompts the battery installation direction of the positive and negative poles. According to this prompt, insert the 2 batteries and install them.
4. After installing the battery, close the mouse cover.
5. Next, find the laptop USB socket and insert the USB plug-in for the mouse into it.
6. At this time, press the computer power button to turn on the computer. Then turn the mouse over, turn it on, and the prompt light will light up. Note: "I" means open, O means closed.
The above is the detailed content of How to install a computer cutting plotter? How to use a computer cutting plotter?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
