Article Introduction：1. First, open [Settings] on your phone and click on the [Desktop, Lock Screen and Wallpaper] option. 2. Then click [Desktop Settings] - [Desktop Style]. 3. You can freely choose between two desktop styles: [standard style] and [drawer style].

2024-04-28 comment 0  1150

Article Introduction：1. Steps to create animation using Photoshop CS5 If you want to create animation in Photoshop CS5, you can follow the following steps: 1. Open Photoshop CS5: Start your Photoshop CS5 software. 2. Import footage: Select "File" -> "Import" -> "Video Frame to Layer" and then select your video file. 3. Create a new frame animation: Go to the "Timeline" panel at the bottom of the window and select "Create Frame Animation" in the upper right corner of the panel. 4. Adjust the order and time of frames: In the timeline panel, you can adjust the order of frames and the display time of each frame. 5. Add frames: If you need to add frames, click the icon in the upper right corner of the timeline panel and select "In each

2024-01-03 comment 0  1628

Article Introduction：1. First open the software. 2. Then open the simulator and click on the menu bar. 3. After opening the menu bar, click Settings Center. 4. Then find the interface settings in the settings center. 5. Click to adjust the picture style. 6. Finally, change to eye protection style.

2024-06-07 comment 0  484

Article Introduction：1. After completing the Flash animation, click the New Layer button in the Timeline Panel to create a new layer. 2. Right-click on the layer corresponding to the last frame of the animation, as pointed by the arrow in the picture. 3. Select to insert a blank keyframe. 4. Click Window - Action to open the action panel. 5. Enter stop() in the action panel. 6. Finally, export the flash animation, which will only play once and then stop.

2024-04-10 comment 0  980

Article Introduction：What keys do you press to install the system on the GALAXY b460m motherboard? When installing the system on the GALAXY b460m motherboard, press f9 to start the GALAX motherboard U disk. Which key is used? When booting the GALAX motherboard USB disk, just press f9. How to choose during GALAX installation system startup? To set the U disk boot sequence in the GALAX motherboard bios, you need to click the F11 key on the keyboard, then select the startup item, and then click the U disk to start. How to install the system on the GALAX motherboard? Which key to press on the startup screen? The specific steps to install the system are as follows: 1. Insert the system installation disk or U disk into the computer, and then restart the computer. 2. When the startup screen appears, press the DEL key or F2 key on the GALAX motherboard to enter the BIOS setting interface. 3. In the BIOS setting interface, find the "Boot" option, and then set the system installation disk or U disk

2024-02-14 comment 0  1632

Article Introduction：How to turn on vt on MSI motherboard? When the first screen appears on the boot screen, press the delete key immediately. Enter the BIOS, open and click language in the upper right corner, select Simplified Chinese, this should change the display to Chinese. After pressing the computer power button (or after restarting), press the delete button quickly and continuously. If you press the delete key correctly, you should enter the bios from the motherboard startup interface. If you have entered the operating system, it means that the press is slow, and you need to restart the computer and open the bios interface of the MSI motherboard again. First, restart the computer. At the beginning, keep pressing Delete on the keyboard to enter the motherboard settings, as shown in the picture. Click "AdvanceMode (F7)" in the lower right corner. Once inside, select High

2024-03-07 comment 0  1255

Article Introduction：1. Use the key combination to take a screenshot: Press and hold the power button and the volume up button at the same time to start screen recording, and press and hold again to end screen recording. 2. Use the shortcut switch to take a screenshot: slide down the notification panel from the top status bar, click Screen Recording to start screen recording. Click the red timing button at the top of the screen to end the screen recording. 3. Knuckle screen recording: Go to Settings > Accessibility > Quick Start and Gestures, and turn on the screen recording switch. When using it, press your knuckles slightly and double-tap the screen quickly and continuously to start the screen recording, and double-tap again to end the screen recording.

2024-03-23 comment 0  1033

Article Introduction：1. First open the MuMu emulator. 2. Then click the menu bar in the upper right corner. 3. After opening the menu bar, click Settings Center. 4. Then open the Settings Center and click Interface Settings. 5. Click the drop-down box of Screen Style. 6. Finally click to change the overall style to sharp.

2024-06-01 comment 0  916

Article Introduction：1. Select the material and double-click the video layout in the information panel to enter the window page as shown: 2. Click 3D mode to enable key frames. Move the timeline pointer to the next position, and the picture-in-picture keyframe will be added automatically as you move the mouse. 3. You can adjust the screen in the parameters on the right, or you can adjust the screen directly with the mouse. See the picture below for details: 4. After adding all keyframes, click OK. Play the timeline and 3D picture-in-picture is created.

2024-04-17 comment 0  504

Article Introduction：The obj format can be opened using software such as maya, 3dmax and WordPad. The obj format is a 3D model file. It is a standard 3D model file format developed by the workstation-based 3D modeling and animation software "Advanced Visualizer". This format file supports lines, polygons, surfaces and free-form curves.

2021-05-07 comment 0  57766

Article Introduction：How to adjust the PR frame: first start the PR software and create a new project; then open the PR operation interface, and then drag the video material into the PR sequence panel; then right-click and select [Sequence Settings]; finally select a screen ratio. Can.

2020-07-15 comment 0  39423

Article Introduction：The shortcut key for a CAD door is "ADT-Space" or "ADE-Space". The one-click method for drawing a door in CAD is: 1. Enter the shortcut key "ADT-Space" for a flat door, absorb the wall, move the mouse, and select the door. 2. Enter the shortcut key "ADE-Space" for the facade door, select two points to draw the door, click the first and second points, move the mouse, and select the opening direction of the door.

2023-03-06 comment 0  18864

Article Introduction：How to make Bilibili animation (Bilibili animation production method), how to operate it specifically, follow the editor to see. First, we open the Bilibili APP on our mobile phone and click [My] in the lower right corner of the page. On the [My] page, scroll down to the bottom of the page, find the [Settings] option, and click to enter the settings panel. On the [Settings] page, we click [Start Screen Settings]. As shown in the figure below, the default startup screen of the software is [Default Mode], we select [Customized Mode] below. As shown in the picture below, we click on the custom mode, select the one you want to set among the various startup effects provided, and then you can successfully set the Bilibili opening animation effect.

2024-06-14 comment 0  549

Article Introduction：Step 1: Draw a rectangular table and a diagonally placed wooden board in PPT, insert a circle on the table, set the filling and other formats as a small ball. Step 2: Select the ball, click the [Animation] tab, click the [Add Animation] button in the [Advanced Animation] group, select [Fly In] in the [Enter] type, and click in the [Animation] group Click [Effect Options], select [From Top] in the pop-up drop-down list, and keep the [Start: On Click] setting unchanged in the [Timing] group. Step 3: Click the [Animation Pane] button in the [Advanced Animation] group to open the animation pane, right-click the animation effect in the animation pane, select [Effect Options] in the drop-down list, and then select Set [Bounce End: 0.25] in the box and click [OK]. fourth

2024-04-17 comment 0  754

Article Introduction：Insert a horizontal text box into the PPT page, enter the number 321, set the text size and color, etc. (You can also insert a background for the page). Select the text box, click the [Font Spacing] button in the [Start]-[Font] group, select the [Other Spacing] option, open the [Font] dialog box, set [Spacing] to [Compact], and the measurement value to [180] . Select the text box, click [Animation]-[Animation Style]-[Appear], and then click [Add Animation]-[Disappear]. At this time, click the [Animation Pane] button to open the animation pane, and you can see the two animations just added. Select animation 1, right-click the mouse, select [Effect Options], and in the [Appear] dialog box that opens, set [Animation Text] to [By Letter], [Delay Between Letters]

2024-04-17 comment 0  586

Article Introduction：This article mainly introduces the related information of microphone animation in WeChat applet development: frame animation, zoom-in, and fade-out. Has very good reference value. Let’s take a look at it with the editor below.

2017-04-21 comment 0  3474

Article Introduction：Onda motherboard one-click USB boot bios settings tutorial? 1. Plug the USB boot disk we made into the USB port of the computer, restart the computer or turn on the computer. When the Onda l screen appears in the startup interface, press the Onda motherboard startup shortcut key F11, as shown in the figure: 2 . After pressing F11, the computer enters the startup item selection screen, as shown in the figure 3. In the startup item selection, we use the "↑" and "↓" direction keys on the keyboard to select "USBDISK2.0PMAP". After selecting, press Press the Enter key to confirm, as shown in the figure: 4. The system will enter the main menu of the USB boot disk, as shown in the figure: USB boot USB boot is a technology that starts some backup restore, PE operating system and other software from the USB disk. Most computers support USB booting.

2024-01-22 comment 0  4150

Article Introduction：Open the photo in PS to create a landscape painting and copy the layer. Execute <Filter - Stylize - Find Edges> to extract the edges of the landscape painting. Execute <Image-Adjustment-Decolorize> to remove the color from the picture. Execute <Image - Adjustments -Levels>, set the input levels to 136, 1.0, 255 respectively, OK. Increase black and white contrast. Keep the layer you just edited in the [Layer] panel, change the [Type] to Overlay, and change the opacity to 80%. Copy the picture just now...

2017-06-15 comment 0  2418

Article Introduction：Open the photo in PS to create a landscape painting and copy the layer. Execute <Filter - Stylize - Find Edges> to extract the edges of the landscape painting. Execute <Image-Adjustment-Decolorize> to remove the color from the picture. Execute <Image - Adjustments -Levels>, set the input levels to 136, 1.0, 255 respectively, OK. Increase black and white contrast. Keep the layer you just edited in the [Layer] panel, change the [Type] to Overlay, and change the opacity to 80%. Copy the picture just now...

2017-06-15 comment 0  2253

Article Introduction：Solution to the kmode_except_not_handled blue screen: 1. Uninstall the graphics card driver and then restart; 2. Uninstall the anti-virus software in "Applications"; 3. Open "Control Panel->Uninstall a program->Enable or turn off Windows functions->Hyper-v ” and then uncheck it.

2023-03-01 comment 0  41457