1. Plug the USB boot disk we made into the USB port of the computer, restart the computer or turn on the computer. When the Onda l screen appears in the startup interface, press the Onda motherboard startup shortcut key F11. As shown in the picture:
2. After pressing F11, the computer enters the startup item selection screen, as shown in the picture
3. In the startup item selection, we use the " Use the ↑" and "↓" direction keys to select "USB DISK 2.0 PMAP". After selecting, press the Enter key to confirm, as shown in the picture:
4. The system will enter the U disk boot disk main menu, as shown in the picture Display:
U disk startup
U disk startup is a technology that starts some backup and restore, PE operating system and other software from the U disk. Most computers support USB booting. It can play a big role in system crash and quick system installation.
Hard disk emulation mode, the C: drive is displayed after DOS startup. The U disk created by the HPU disk formatting tool adopts this startup mode. This mode has high compatibility, but it cannot be started for some computers that only support USB-ZIP mode. (It is recommended to use this format, which has the highest penetration rate.
Large-capacity floppy disk emulation mode, A disk is displayed after DOS startup. The USB-ZIP boot U disk produced by FlashBoot adopts this mode. This mode is used in It is the only optional mode on some older computers, but the compatibility is not good for most new computers, especially large-capacity U disks.
According to my understanding, the shortcut key for Onda B760 motherboard to enter the U disk startup may be to press the F11 key or F12 key when booting. Different computers may be different. It is recommended that you press the F11 key or F12 key when booting. Try pressing different keys to enter the boot menu, and then select the USB flash drive as the boot device. If the above method does not work, you can also set the USB flash drive device as the preferred boot device in the BIOS settings.
Onda motherboard needs to follow the following steps to set U disk boot:
1. Enter BIOS settings: press the "Delete" or "F2" key when booting , enter the BIOS settings.
2. Find the startup tab: Find the startup tab in the BIOS settings.
3. Set the U disk as the first startup item: In the startup tab, Find the "Boot Priority" or "Boot Sequence" option and set the U disk as the first boot item, that is, it will be ranked before other boot devices.
4. Save and exit: After the settings are completed, press "F10" key saves the settings and exits the BIOS.
5. Insert the USB flash drive and restart: Insert the prepared USB flash drive into the computer, restart the computer, and the computer will automatically boot from the USB flash drive.
It should be noted that the prerequisite for booting from the U disk is that there must be bootable operating system or tools and other files in the U disk. If there are no bootable files in the U disk, the computer cannot boot from the U disk.
The shortcut key for Onda motherboard U disk startup is: F11 Qiuye system is easy to use, this is very smooth!
The method for setting up U disk boot on Onda motherboard is as follows: 1. Enter the BIOS setting interface of the computer. Usually, you can enter the BIOS setting interface by pressing the Del key, F2 key or F10 key when turning on the computer. The specific keys The bits may vary depending on the motherboard model. 2. In the BIOS setup interface, use the arrow keys to select the "Boot" option and press the Enter key to enter. 3. In the boot options, find "Boot Priority" (Boot Priority) or "Boot Sequence" option and press Enter to enter. 4. In the Boot Priority or Boot Sequence option, find "Removable Devices" or "USB" option and move it to the top. After this setting, the computer will first try to boot from the USB flash drive. 5. Save the settings and exit the BIOS interface. Usually press the F10 key to save settings and exit, or follow the on-screen prompts. 6. Insert the prepared USB flash drive into the computer and restart the computer. 7. The computer will boot from the USB flash drive and perform corresponding operations according to the operating system or tools in the USB flash drive. Setting up a USB drive to boot can help us quickly install or repair the operating system when needed, or run some specific tools. Before setting up a USB flash drive to boot, you need to ensure that the required operating system or tools have been correctly installed in the USB flash drive. At the same time, in the BIOS setting interface, you can also make other settings, such as setting the hard disk startup sequence, enabling or disabling other devices, etc. Different motherboard manufacturers and models may have different BIOS setting interfaces and options, so during specific operations, you can refer to the motherboard manual or search for relevant tutorials.
There may be several reasons why Onda 945gct cannot boot from the USB disk.
First, check whether the BIOS is set correctly and make sure the motherboard is set to boot from the USB flash drive.
Secondly, try to use another USB flash drive or reformat the USB flash drive. You can also try to boot from a USB flash drive with other operating systems. If none of the above methods can solve the problem, there may be a problem with the USB interface of the motherboard or the USB flash drive. It is recommended to check the motherboard manual or contact after-sales service.
The above is the detailed content of Onda motherboard BIOS setting tutorial: One-click boot method using U disk. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
