Article Introduction：Animated drop-down navigation menu effect implemented with CSS3

2016-11-09 comment 0  1116

Article Introduction：HTML, CSS and jQuery: Create a navigation menu drop-down animation effect. In web development, an attractive page effect can increase users' favorability of the website and improve user experience. Among them, menu navigation is one of the common elements in websites. We can add animation effects to increase the interactive effect of menus and make the website more vivid. In this article, we will use HTML, CSS, and jQuery to create a navigation menu with drop-down animation effects. Through the following steps, you will learn how to use this

2023-10-27 comment 0  1194

Article Introduction：This is a cool hexagonal menu animation effect made using CSS3 and a small amount of js code. The hexagonal menu has a highlight animation effect when the mouse slides over it. When the menu is clicked, each menu item pops out along each side of the hexagon to form a large hexagon.

2017-01-17 comment 0  2128

Article Introduction：We know that drop-down menus made using CSS3 are not compatible with IE6, and IE8 and below do not support some CSS3 attributes, such as opacity, transition, etc. This time I will tell you about the steps to implement the animated drop-down menu effect using CSS3. .

2017-11-30 comment 0  2609

Article Introduction：1. Create a new PPT document and click [Insert - Picture]. 2. Drag the picture so that the white cloud picture covers the entire editing window. 3. Click [Animation - Custom Animation] in the menu bar. 4. Select the image and click [Add Effect]. 5. Select [Emphasis - Zoom] in [Add Effect]. 6. Click the lower right corner of the action list item to pop up the drop-down menu, and select [Timing] in the menu. 7. Select [Very Slow] for [Speed] and [Until next click] for [Repeat]. 8. The effect of moving from far to near is revealed.

2024-03-26 comment 0  390

Article Introduction：Methods to maximize web pages: 1. Close all browser windows first; 2. Right-click the browser icon in the quick launch bar; 3. Click Properties, and the Internet Explorer browser properties page will pop up; 4. Click the shortcut label, In the running mode (R) of the page that appears, click the drop-down bar on the right, select Maximize, and then press "OK" to exit; 5. Open the browser, pull the border to extend the window to the entire screen.

2023-07-10 comment 0  9738

Article Introduction：Step 1: Draw a rectangular table and a diagonally placed wooden board in PPT, insert a circle on the table, set the filling and other formats as a small ball. Step 2: Select the ball, click the [Animation] tab, click the [Add Animation] button in the [Advanced Animation] group, select [Fly In] in the [Enter] type, and click in the [Animation] group Click [Effect Options], select [From Top] in the pop-up drop-down list, and keep the [Start: On Click] setting unchanged in the [Timing] group. Step 3: Click the [Animation Pane] button in the [Advanced Animation] group to open the animation pane, right-click the animation effect in the animation pane, select [Effect Options] in the drop-down list, and then select Set [Bounce End: 0.25] in the box and click [OK]. fourth

2024-04-17 comment 0  735

Article Introduction：Construct a circle. Open the geometric drawing board, select the [Circle Tool] on the left sidebar, draw a circle O on the drawing board, use the [Point Tool] to pick a point P on the circle, use the [Line Segment Tool] to draw a line segment AB, and then use Move Select the line segment with the tool, click the [Measure] menu on the upper menu bar, and select the [Length] command from its drop-down option to measure the length of line segment AB and construct circle P. Select the point P and the length of the line segment AB just measured, click the [Construction] menu in the upper menu bar, and select the [Draw a Circle with Center and Radius] command from its drop-down option. In this way, you will get the circle P and create an animation button. Select point P, click the [Edit] menu in the upper menu bar, select the [Operation Button]-[Animation] command in its drop-down option, and then click in the pop-up dialog box

2024-04-16 comment 0  520

Article Introduction：1. Insert independent text boxes into PPT to enter questions and options, and insert connections according to the correct answers. 2. Select the first connection, click the [Animation] tab, click the [Add Animation] button in the [Advanced Animation] group, and select [Erase] in the [Enter] category of the pop-up drop-down list. 3. Click [Effect Options] in the [Animation] group, select [From Left] in the drop-down list, and leave [Start: When Clicked] unchanged in the [Timing] group. 4. Click the [Home] tab, click the [Select] button in the [Edit] group, and click [Selection Pane] to open the selection pane. 5. Click the names of the objects in the selection pane to see which object they correspond to in the slide. Prepare for trigger selection later. 6. Click on the first connection

2024-03-26 comment 0  638

Article Introduction：This article is based on jquery and css3 to implement a drop-down navigation menu effect that imitates the Windows 10 start menu. The code is super simple. Friends who are interested should take a look.

2016-05-16 comment 0  2188

Article Introduction：Menu navigation is crucial in a website, it can directly affect the user experience. An attractive navigation can guide users to browse more content on the website. This article will share with you 8 menu navigation switching special effect codes. All of them are free. You can click on the corresponding link in the article for animation preview. You are welcome to share and download~

2021-08-10 comment 0  5772

Article Introduction：How to close 360 ​​browser pictorial? When I downloaded the 360 ​​browser, it automatically turned on the pictorial function. How do we turn it off? Let’s introduce it below! 360 Browser automatically installed the pictorial function. When we use it, it will constantly pop up pop-up windows, which makes me very inconvenient when browsing the web. So we should turn off the pictorial function of 360 Browser. Xiao The editor below has compiled the steps to close the 360 ​​Browser Pictorial. If you don’t know how, follow me and read on! How to close the 360 ​​browser pictorial 1. We can also open the 360 ​​browser and click on the three horizontal lines in the upper right corner. 2. Then open the "Settings" drop-down menu. 3. Then enter the "Laboratory" on the left. 4. Then cancel the "Enable 360 ​​Pictorial function"

2024-01-29 comment 0  1330

Article Introduction：First, open FastStoneCapture, click Open in the drop-down menu of the first icon of the tab, then click Special Effects - Edge/Watermark in the upper menu bar, and then a dialog box will pop up, check the watermark image, click Browse, add your watermark, and then , change the watermark position and opacity, and then apply the effect as follows. The watermark is added successfully.

2024-05-09 comment 0  969

Article Introduction：ArtSet4 is a painting software with a strong hand-painted texture. Its three-dimensional effect sometimes makes it difficult to tell whether it is a board painting or a hand-painted one. In addition, it also supports reference picture mode, so you don’t have to cut back and forth when copying. However, as a painting software, its usage rate is not as high as other painting software, so many friends do not know how to use it at all. Today we will talk about how to import pictures in artset4. 1. Open the artset4 software and enter the painting interface of the software. 2. Click the [File] option in the menu bar, click the [New] option in the pop-up drop-down menu, set the size of the canvas according to your needs, and click [OK] 3. Then We click the [View] option in the menu bar and click the [Reference View] option in the pop-up drop-down box.

2024-02-11 comment 0  816

Article Introduction：Open the geometric sketchpad, select the [Line Segment Tool] in the toolbox on the left, draw the line segment AB in the blank area, and then use the [Point Tool] to draw any point O on the line segment. Use the [Point Tool] to draw a point C arbitrarily outside the line segment, select point O and point C on the line segment, click the [Measure] menu above, and select [Distance] from the pop-up drop-down menu, so as to measure except point C and animation. The distance from point to point O. Select the distance measurement value between the two points in the upper left corner of the drawing board and the line segment AB, click the [Display] menu above, select [Color] under the drop-down menu, then continue to select [Parameters], and click [OK] in the pop-up dialog box. After completing the above settings, then drag point O on the line segment to see the effect. The color of the line segment is constantly changing, as shown in the picture.

2024-04-17 comment 0  809

Article Introduction：What should I do if the edge browser prohibits web page redirection? This is most likely caused by the edge browser's prohibition of automatic web page jumps. Although it can prevent pop-up advertisements from some websites from affecting use, a single page may cause some web pages to fail to jump normally. So how to disable this function? Woolen cloth? Let’s take a look at the specific methods below. Unlock tutorial 1. First open the edge browser. 2. Click the menu option in the upper right corner. 3. Then click the Settings button. 4. Pull down to find the advanced settings. 5. Click the Block Pop-up button.

2024-03-13 comment 0  1172

Article Introduction：Construct line segment AB and pick any point C on the line segment. Open the geometric sketchpad, select the [Line Segment Tool] on the left sidebar, and draw a line segment AB arbitrarily in the work area on the right. Select and click the [Construction] menu in the upper menu bar, and select the [Point on Line Segment] command from its drop-down option. In this way, point C is constructed and the value of point C is measured. Use the [Move Tool] to select point C, then click the [Measure] menu in the upper menu bar, and select the [Point Value] command from its drop-down option. You can measure the value of point C on line segment AB, and calculate the value as the second The speed of movement of a point. Click the [Data] menu in the upper menu bar, select the [Calculate] command from its drop-down option, and enter the formula as shown in the pop-up dialog box as the movement speed of the second point. If you want to change exercise in the future

2024-04-16 comment 0  1199

Article Introduction：Open the PPT document that needs to be edited, find the slide that needs to be edited, select the object that needs to be animated, click Animation in the menu bar, and select the [Fly In] animation effect. At this time, click the effect option on the right, and there will be many options to choose from. Flying direction, but if these directions cannot meet our needs, we need to customize the drop-down arrow menu next to the animation option. A large dialog box will pop up. Select the custom animation path below. When the mouse clicks, it will turn into a cross. Press and hold the left button. After drawing the path for the animation to play on the screen, click enter. At this time, you can see that the selected object will move according to the drawn path. Click the drawn path, you can see a series of small circles appearing on the edge of the path. At this time, you can modify the path.

2024-04-17 comment 0  799

Article Introduction：Create a new slide, then insert vertical text, write the topic content, insert a circular shape into the menu bar, set the properties of the shape, fill it with white, select the wireless line to turn the circle into a Write a circular shape transparently and then set the background color. Fill the background of the slide with black and set the inserted text theme content to be on top. Select the circle, click the menu bar to customize the animation, set an animation effect, and we choose Fly Click on the set fly-out animation effect as shown in the picture and set its timing time. If you want it to be fast, you can set it to 0.5 seconds. After setting it up, click on the preview effect in the menu bar animation. To see the spotlight effect, sweep out your theme text from top to bottom.

2024-04-17 comment 0  1034

Article Introduction：Adobe After Effects (hereinafter referred to as ae) is a professional software for designing various visual special effects. With this software, we can produce various visual special effects. After the production is completed, we can also choose the export format according to our needs. Many friends want to export to MP4 format after using AE to create special effects, but they don't know how to do it. Next, let’s take a look at how ae exports videos in MP4 format. 1. First, create the special effects you need in AE. 2. After the production is completed, click [File] in the upper left corner of the interface and find [Export] in the drop-down list. Click on the sublist [Add to Rendering Queue]. 3. Click [Output Module] on the right. 4. Click [Format] in the pop-up window and select [Format] in the drop-down list.

2024-02-14 comment 0  1484