Article Introduction：1. How to turn on the wireless hotspot function of the computer. With the popularity of mobile devices, there is an increasing demand for using computers as wireless hotspots. By turning your computer into a wireless hotspot, you can easily share your network connection with other devices, such as mobile phones, tablets, etc. So, how to turn on the wireless hotspot function on your computer? This article will provide you with detailed steps. 1. Check the Wi-Fi network card. First, make sure that your computer has a network card that supports wireless networking. Most modern computers already have Wi-Fi capabilities built in, you can check your network card model in Device Manager to confirm. If your computer does not have Wi-Fi capabilities, you may consider purchasing an external wireless network card. 2. Open network settings in Windows operating system

2024-08-19 comment 0  1197

Article Introduction：1. How to use computer wifi hotspot software to create a wireless network? Turn your computer into a hotspot In modern society, our dependence on the Internet has reached an unprecedented level. The popularity of wireless networks allows us to connect to the Internet anytime and anywhere, no longer limited by the limitations of wired networks. In some cases, we may need to create a wireless network without a router, and this is when computer wifi hotspot software comes in handy. 1. What is computer wifi hotspot software? Computer wifi hotspot software is a software that can turn your computer into a wireless network hotspot. It allows us to share our computer's wireless network connection to other devices, such as mobile phones, tablets, etc. With this software, we can operate without routing

2024-08-13 comment 0  1084

Article Introduction：Solution to the problem that the computer hotspot is connected but cannot access the Internet: 1. Click on the network connection in the lower right corner of the computer desktop to enter the network sharing center; 2. In the network center, click on the wireless network connection option on the right side; 3. Click on the diagnostic tool to enter the diagnostic page; 4. , Automatically diagnose problems that occur in computer connection hotspots; 5. Return to the properties panel, click "Properties" in the lower left corner to enter the computer property options; 6. Double-click Internet Protocol Version 4 to enter the DNS settings page; 7. Set in the IP settings column to Automatically obtain an IP address and automatically obtain a DNS address to access the Internet.

2023-06-26 comment 0  54098

Article Introduction：1. The computer cannot connect to Xiaomi 10s hotspot? The first step is to open the settings function on your phone. 2. In the second step, go to the homepage of your phone and click under "Network and Connections". 3. The third step is to enter the hotspot setting page and click "Set WLAN Hotspot". 4. The fourth step, on the next page, set the password and network name. 5. The fifth step is to return to the personal hotspot page and click to turn on the switch behind "Portable WLAN Hotspot". 6. The sixth step is to click on the hotspot name of the mobile phone in the network connection list on the computer and enter the correct password to connect. However, there is a prerequisite that the computer must support wireless network cards. 2. Xiaomi Mi 10s does not respond when connected to the computer? Because current smart phones need to turn on the USB debugging mode before connecting to the computer.

2024-09-02 comment 0  1086

Article Introduction：1. Can’t connect to the computer hotspot? Reasons and solutions for the computer unable to connect to the hotspot: 1. It may be that the computer's wifi function is not turned on, or the computer has turned on airplane mode. Solution: Try turning on the computer's wifi function, or turn off airplane mode and then restart the computer. 2. It may be that the hotspot is not turned on, or the computer is too far away from the hotspot. Solution: After trying to turn on the hotspot, place the computer near the hotspot. 3. It may be that the hotspot has been accidentally disabled, causing the network connection to fail. Solution: Open the Windows Settings interface, then select the "Network and Internet", "WLAN", "Change Adapter Settings" options, and finally find the disabled wireless network and right-click to select "

2024-08-06 comment 0  481

Article Introduction：The computer can connect to the mobile phone hotspot. The mobile phone hotspot refers to converting the mobile phone device into a wireless network hotspot through the mobile phone's mobile network connection, which can be used for other devices to connect to the Internet through Wi-Fi. By connecting to the mobile phone hotspot, it can be used when the wireless network is unavailable. You can use your phone's mobile network to connect to your computer for Internet access without the need for an additional wired network connection, which provides convenience for mobile office work and network sharing. Connecting your computer to a mobile hotspot will use your phone's mobile network data, so you need to pay attention to the data limits and fees in your mobile phone plan.

2023-09-14 comment 0  8466

Article Introduction：The solution to the problem that the mobile hotspot cannot be set up on the win10 computer is: 1. First open the control panel homepage; 2. Then click the [Device Manager] and [Network Adapter] options; 3. Then open the wireless hotspot driver properties panel and set [2.4GHz The value of 802.11n channel width is 20MHz.

2020-04-07 comment 0  4363

Article Introduction：1. How to share computer WIFI hotspot? 1. Boot into the system. Right click on the starting position and select option 2. Select 3. Click on the option on the right to turn on the mobile hotspot function 4. After selecting the network connection to be shared, you can click to modify the network name/password/frequency band to be shared. 5. Edit the network name/password/frequency band to be shared. Edit the network name/password/frequency band to be shared. 6. After completion, you can see the devices connected to this mobile hotspot on the function page. 2. How to hide computer WIFI hotspot? Hiding wifi hotspots means hiding the wireless network SSID, which prevents other devices from searching for wifi and fundamentally eliminates the phenomenon of wifi network interference. How to hide wireless network SSID: 1. Turn on the computer

2024-08-14 comment 0  1114

Article Introduction：1. The hotspot is turned on on the mobile phone but cannot be found on the computer. The hotspot is turned on on the phone and cannot be found on the computer. This is one of the problems that many users often encounter when using the mobile network sharing function. To put it simply, when your mobile phone has the hotspot function turned on, but the hotspot signal cannot be found on your computer, this may cause you trouble. In this article, we’ll explore the possible causes of this issue and how to fix it to help you resolve this problem quickly. Possible reasons 1. Network adapter problem: The wireless network card on the computer may be abnormal, resulting in the inability to search and connect to the hotspot signal turned on by your mobile phone. 2. Driver problem: The wireless network card driver on the computer may need to be updated or may be faulty, affecting the search for hotspot signals. 3. Hotspot settings problem: The hotspot settings on your mobile phone may be

2024-09-03 comment 0  1057

Article Introduction：Some users who often use computers don’t know how to turn on a hotspot on their computer. In fact, not only mobile phones can turn on it, but computers can also turn on a hotspot connection. Now I will use the win7 system as an example to introduce how to turn on the computer in the win7 system. Hotspot. How to open a hotspot on a win7 computer 1. Search for "CMD" through the search function in the lower left corner of the taskbar, right-click and select "Run as administrator" 2. Enter the "netshwlansethostednetworkmode=allowssid=4Gtestkey=12345678" command and press the Enter key, where the ssid is Enter the wireless network name and key, which is the wireless network password, and then press Enter to continue. 3. Open “Network Sharing”

2023-12-30 comment 0  2415

Article Introduction：I turned on the hotspot on my phone and connected to the computer, but the computer showed that there is no network. The computer connected to the hotspot but could not access the Internet. This situation may be caused by the following reasons: unstable signal, data traffic limit, authentication problem, driver Questions and hotspots are disabled. Unstable signal: The mobile phone signal may be unstable, causing the computer to be unable to access the Internet through the hotspot. Try using the hotspot in an area with strong signal. Problems with mobile phone hotspot settings: If the computer has successfully connected to the hotspot but cannot access the Internet, there may be a problem with the phone's hotspot settings. You can try to re-enable the hotspot function, or change the hotspot's security mode from WPA2 to WPA or turn off the security mode. The wifi function is not turned on: It may be that the wifi function of the computer is not turned on, or the computer is turned on.

2024-06-05 comment 0  1107

Article Introduction：   What should I do if my computer cannot access the Internet after turning on the hotspot in Win11? When we use computers, we sometimes need to turn on hotspots, but many users are asking that their computers cannot access the Internet after turning on hotspots. So what is going on? Now let the editor introduce to users the detailed explanation of why the computer cannot access the Internet after turning on the hotspot in win11.  Detailed explanation of why the computer cannot access the Internet after turning on the hotspot in win11   Method 1:  1. First, open Windows Settings (Win+i), click [Windows Update] on the left sidebar. 2. On the right side, click [Update History] under More Options

2024-06-09 comment 0  398

Article Introduction：Desktop computers cannot connect to mobile hotspots. It is a desktop computer that usually does not have built-in wireless network functions and cannot directly connect to mobile hotspots. However, by using a USB data cable, wireless network card adapter or USB wireless network card, a desktop computer can be connected. Connection to mobile hotspot. Detailed introduction: 1. Use a USB data cable to connect the mobile phone to the desktop computer to achieve network sharing. After connecting the mobile phone to the computer, enable the USB network sharing function in the mobile phone settings, open the network settings on the computer, and select the USB connected to the mobile phone. Networks as network connections and so on.

2023-09-18 comment 0  5107

Article Introduction：The inability to turn on the mobile hotspot on your computer may be due to driver issues. Solution: Right-click this computer, open management, open "Device Manager", find "Network Adapter", and enable the disabled device.

2019-10-24 comment 0  87291

Article Introduction：Solution to the problem that the computer cannot find the mobile phone hotspot: 1. Check the computer wireless network card and repair it; 2. Set the AP frequency band of the mobile phone wifi hotspot on the mobile phone from the original 5Ghz to 2.4Ghz.

2021-03-17 comment 0  213720

Article Introduction：1. Why can’t iPhone connect to computer hotspot? Solution 1: It is very likely that there is a problem with the network connection. First turn off the hotspot of the iPhone, then turn it back on, then restart the computer, and then try to connect again. Solution 2: The hotspot of the iPhone is turned on, but the computer cannot connect. It may also be caused by the computer's wireless network adapter being disabled. It is recommended that you check whether "obtain IP address and DNS server address automatically" is turned on on your computer. 2. Why can’t the computer connect to the iPhone hotspot? It may be that DNS is not set up properly. Right-click the network, click Properties, click Change Adapter Settings, right-click the selected network, click Properties, select the Network tab, and click Internet

2024-08-25 comment 0  917

Article Introduction：How to connect wifi hotspot on computer 1. How to connect wifi hotspot on mobile phone on computer. Open mobile data and personal hotspot on mobile phone; left-click the small globe in the lower right corner of the screen; left-click the name of the mobile phone and click connect. 2. Open the mobile data connection. First, make sure your data connection has enough traffic, otherwise it will cost you money. Click wlan hotspot to start wireless hotspot. Click Set WLAN hotspot on the interface. The interface shown below appears with the network name and password. 3. Method steps: Turn on the mobile hotspot and click "Broadband Connection" in the toolbar in the lower right corner of the computer. Then click "WLAN" and the computer will search for all nearby wifi and hotspots. Each hotspot has a different name, find the mobile hotspot in the hotspot list

2024-03-23 comment 0  1961

Article Introduction：1. How to connect an iPhone to a computer as a hotspot? 1. Connect using USB data cable: If iTunes is already installed on your computer, you can use a USB cable to connect your iPhone to your computer. After the connection is successful, you may see the prompt "Do you want to trust this computer?" on your iPhone. Please click "Trust". And turn on cellular data and personal hotspot in the iPhone Control Center, and then you can use your iPhone on your computer. Hotspot. This connection method is simple and convenient and does not require a password. 2. Connect via Wi-Fi function: On the iPhone, go to the Control Center and turn on "Cellular Network" and "Personal Hotspot" or enter the iPhone settings and turn on cellular data. Click "Personal Hotspot" and

2024-09-02 comment 0  899

Article Introduction：1. Can’t connect to computer when opening hotspot on iPhone? If the personal hotspot of the Apple mobile phone cannot connect to the computer, it may be because the wireless network adapter is disabled. Check whether it is turned on to automatically obtain the IP address and DNS server address. The method is: 1. Turn on the computer and click the Start button. 2. In the interface that opens, click the "Settings" icon. 3. In the control panel that opens, click the "Network and Internet" option. 4. In the interface that opens, click the "Network and Sharing Center" option. 5. Then in the opened interface, right-click the "Wireless Network Connection" option. 6. Double-click the "Internet Protocol (TCP/IPV4)" option. 7. In the interface that opens, check "Obtain IP address automatically" and check "Obtain IP address automatically".

2024-09-02 comment 0  1243

Article Introduction：1. Can’t connect to computer when opening hotspot on iPhone? If the personal hotspot of the Apple mobile phone cannot connect to the computer, it may be because the wireless network adapter is disabled. Check whether it is turned on to automatically obtain the IP address and DNS server address. The method is: 1. Turn on the computer and click the Start button. 2. In the interface that opens, click the "Settings" icon. 3. In the control panel that opens, click the "Network and Internet" option. 4. In the interface that opens, click the "Network and Sharing Center" option. 5. Then in the opened interface, right-click the "Wireless Network Connection" option. 6. Double-click the "Internet Protocol (TCP/IPV4)" option. 7. In the interface that opens, check "Obtain IP address automatically" and check "Obtain IP address automatically".

2024-09-02 comment 0  393