1. ASUS motherboard. If the white light is always on, it means the graphics card detects abnormally or does not support UEFI mode.
2. Check the DEBUG light of the mainboard fault and see which light is on. There are 4 LED lights, and there are standards below, which are CPU memory, GPU BOOT startup. If the light comes on, there is something wrong with the accessory. Take it apart and reinstall it.
3. ezdebugled is a function provided by MSI motherboard to detect hardware fault points. If one of the indicators lights up, it means that the corresponding hardware may be faulty.
4. It is the troubleshooting light. The white light on the motherboard is caused by the following reasons: 1. First unplug the computer power cord and press the power button on the chassis 5-6 times. Release the residual charge on the motherboard. 2. Then open the side panel of the chassis and insert and pull out the memory slots. 3. Remove the CMOS battery from the motherboard and reinstall it after 1 minute.
5. Check whether the graphics card is in poor contact, remove the graphics card, insert the gold finger, and clean the dust. Check whether the monitor graphics card cable is in poor contact. If you have discrete and integrated graphics cards, check whether the wrong graphics card is connected. Is the external power supply connected?
Possible reasons include: the memory is broken or the memory is incompatible with the motherboard, the memory slot is gray or malfunctioning, or there is a problem with the processor memory controller.
The motherboard has residual charge. If the MSI motherboard's bright white light display is not used for a long time, the motherboard will have residual charge. When the motherboard is turned on again, the MSI motherboard's bright white light display will not light up. First unplug the MSI motherboard bright white light display power cord, press the power button on the chassis 5-6 times to release the residual charge on the motherboard to recover.
is the troubleshooting light. First of all, to see the steady white light on the MSI b560m blast bomb motherboard, unplug the computer power cord and press the on/off button on the chassis 5-6 times. Release the residual charge on the motherboard. The second step is to open the side panel of the chassis and insert and remove the memory slots.
Poor memory contact. When MSI's DEBUG light flashes alternately between the CPU and DRAM, it is generally possible that the BIOS is incompatible with the memory chips (rarely), the memory is in poor contact, and the CPU is in poor contact. Personal experience is the best way to deal with these three situations.
1. It is the troubleshooting light. The VGA light on the MSI b660 motherboard keeps turning white for the following reasons: First unplug the computer power cord and press the power button on the chassis 5-6 times. Release the residual charge on the motherboard. Then open the side panel of the chassis and insert and remove the memory slots.
2. Solution steps for MSI b660m mortar vga bright white light: Unplug the computer power cord and press the switch key on the chassis 5 to 6 times. Release the residual charge on the motherboard. Open the side panel of the chassis and insert and remove the memory slots. Remove the CMOS battery from the motherboard and reinstall it after 1 minute.
3. The motherboard has residual charge. If the MSI motherboard's bright white light display is not used for a long time, the motherboard will have residual charge. When the motherboard is turned on again, the MSI motherboard's bright white light display will not light up. First unplug the MSI motherboard bright white light display power cord, press the power button on the chassis 5-6 times to release the residual charge on the motherboard to recover.
4. The VGA light on the MSI computer motherboard is always on, which means the graphics card is faulty or the graphics card is not detected. If the VGA light on the MSI computer motherboard is always on, it means the graphics card is faulty or the graphics card is not detected.
5. The keyboard light does not light up. First, wipe the memory stick with an eraser, and check whether there are any burn marks on the gold finger of the memory stick. Replace the memory slot. Check the capacitors and resistors on the motherboard to see if there are bulges in the capacitors and whether there is a burnt smell on the motherboard, and clean the dust on the motherboard.
Poor contact. First check whether the graphics card and the motherboard are in good contact, whether the graphics card is working normally, clean the gold finger of the graphics card, and try to plug it in again. Secondly, check if the host computer is not turning on normally due to problems such as poor memory contact. Poor contact will cause the yellow light, white light, and red light on the MSI motherboard to restart and turn on again.
Generally, this situation may be caused by incompatibility between BIOS and memory particles (rare), poor memory contact, and poor CPU contact. MSI Technology Co., Ltd. was established in August 1986. English brand name: Micro-Star. The headquarters is located in Zhonghe District, New Taipei City, Taiwan, China.
Check whether the external wiring of the computer is well connected. If so, you can unplug each wire and plug it back in again. If the computer still cannot be turned on, open the host case and check to see if there are any excess metal objects in the case or whether there is a short circuit caused by deformation of the motherboard.
The white light on the CPU light on the MSI motherboard means that the CPU fan is not connected to the power supply. Check whether the CPU fan is connected to the power supply. If the red light is displayed, it means that the CPU cannot be detected or is malfunctioning, and you need to contact after-sales service. The CPU problem is that it is not installed properly or is malfunctioning.
The heat dissipation is not good. The system overheats due to the influence of weather temperature or insufficient number of revolutions of the CPU fan, which may cause the computer to automatically shut down. It is recommended to check whether the system temperature is normal. Memory reasons.
CPU failure: If the CPU fails, it will cause the motherboard's CPU indicator to turn red and cause the computer to fail to boot. Memory problems: Memory failure can also cause the motherboard CPU indicator to turn red. Make sure the memory is plugged in and stable.
1. If the monitor is not powered on (the indicator light does not light up), then look at the back of the monitor, plug the power cord connected to the monitor upwards, and check the power cord. Is there power from one end to the socket?
2. First check whether the contact is good. You can separately check whether the contact between the graphics card and the monitor is good, and whether the contact between the graphics card and the motherboard IO slot is good. If necessary, remove it and reinstall it to ensure that it is installed in place and the contact is good.
3. Check whether the graphics card is in poor contact. Remove the graphics card and insert the gold finger to clean the dust. Check whether the monitor graphics card cable is in poor contact. If you have discrete and integrated graphics cards, check whether the wrong graphics card is connected. Is the external power supply connected?
The above is the detailed content of MSI motherboard bright white light. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
