php editor Banana will introduce to you how to reinstall the system after replacing the CPU and motherboard of the computer. After replacing these two hardware, we need to reinstall the system to ensure the compatibility and stability of the new hardware. The specific method is as follows: First, we need to prepare a bootable installation media, which can be a U disk or CD. Then, insert the installation media into the computer and restart the computer. During the startup process, follow the prompts to enter the BIOS setup interface and set the startup sequence to boot from the installation media first. Save settings and exit BIOS. Next, the system will automatically boot from the installation media and enter the installation interface. Follow the prompts to select language, time zone, keyboard layout and other information. Select "Custom Installation" to enter the partition interface. In the partition interface, select the hard disk to partition and format. Then, select the target partition to be installed and click "Next" to start installing the system. During the installation process, follow the prompts to make appropriate settings, such as user name, password, etc. Finally, the system will automatically complete the installation and restart the computer. After restarting, we can enter the new system interface and start using the computer. The above are the brief steps to reinstall the system after replacing the CPU and motherboard. I hope it will be helpful to you.
There are the following possible solutions:
1. Since it is a new motherboard, it is usually equipped with a motherboard driver CD. You can directly find the network card driver and install it.
2. Check the model of the MSI motherboard on the motherboard, then find a computer with Internet access, go to the MSI official website and download the driver for the corresponding network card model to the removable disk.
When downloading, please pay attention to the operating system and bit number of your computer, for example: windons 7 64-bit, windons 7 32-bit, windows 10 64-bit.
Then insert the removable disk into your current computer and install the network card driver.After replacing the motherboard, you need to reinstall the system because the drivers are different! Unless it is an upgraded motherboard of the same model, there may be no problem! Some will not start immediately after replacing them! There is a Windows package software. After changing the package, shut down the computer and turn it on after changing the motherboard. After the system is automatically reinstalled and the driver is installed, all the software you used before will still be there! This method belongs to the Ghost system. After encapsulation and compression, it can be used on different computers!
After replacing the motherboard and CPU of the computer, it is almost the same as changing the computer. If the new motherboard supports the original hard drive and you want to continue to use the original hard drive, then you don’t have to worry about the operating system and use the original one. The operating system is enough. If you want to change the operating system, just use the system USB disk to reinstall it. Before reinstalling, be sure to back up the data!
Thinkpad edge e540 is a product produced from the fourth quarter of 2013 to the first quarter of 2014. All products use Intel HM87 motherboards. All products use fourth-generation Intel (suffixed with MQ) processors. The highest It's i7-4712MQ.
The current fourth-generation notebook computer (with MQ suffix) has the highest processor, i7-4900MQ, which is the same 22nm production process as i7-4712MQ, with a PGA946 slot and 946 pins.
A motherboard from five years ago definitely cannot be plugged into the latest version of a CPU. According to the trend of electronic products being updated one model a year, if it was a sixth-generation CPU five years ago, it has now been updated to 11. The current generation of CPUs, whether it is the requirements for the motherboard or the pins of the CPU, are completely different from those five years ago. The motherboards at that time could only support the CPU of that time or the adjacent generation. If you want to install the latest The CPU and motherboard should also be replaced with the latest ones.
It is possible to change the hardware. Are you asking about the chassis restrictions? Whether the chassis is suitable depends on your motherboard. If you don’t change the motherboard, you don’t have to change the chassis. If you want to change other hardware, it depends on your motherboard. Does your motherboard support it? Do you want to keep only that chassis? Replace all other hardware? You can also find a suitable motherboard first, and then find matching CPU, memory, graphics card and other accessories. In this way, you can replace all the hardware you want to mix. It's what you want. Secondly, the chassis you want to keep is also kept. I don't know if my answer can help you.
The motherboard can be replaced with a CPU of the same model and can be used directly on the motherboard. If we need to replace the CPU, well, if we buy a CPU of the same model, we can unplug the original CPU and insert the new CPU into the motherboard. On the CPU card slot, as long as the interface is correct, it is okay to change to a different model of CPU, so that we can complete the CPU upgrade, but the performance of the motherboard must also be able to drive the CPU.
The above is the detailed content of How to reinstall the computer system after replacing the CPU and motherboard?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
