php editor Youzi will answer the question of how to enter the system through Colorful BIOS. Colorful is a well-known computer hardware brand. Its BIOS (Basic Input/Output System) is the basic input and output system when the computer starts. It is very important to know how to enter the system. Under normal circumstances, we can enter the BIOS setting interface by pressing the shortcut keys displayed when the computer is turned on (such as Del, F2, F12, etc.), then perform corresponding operations as needed, and finally save and exit the BIOS to enter the system. Hope this brief introduction helps you!
To enter the Colorful BIOS system, you need to press a specific key combination when the computer is turned on, usually pressing the F2, F10 or Del key, depending on the different computer brands.
There are many settings that can be changed after entering the BIOS, including the order of booting devices, adjusting the CPU frequency and voltage, changing the system time, etc. However, you need to be careful when modifying settings to avoid affecting the normal operation of the system.
After completing the settings, you can save the changes by exiting the BIOS and restart the computer for the new settings to take effect.
Setting method:
1. After turning on the computer, when the motherboard self-test screen or brand logo screen appears, press the BIOS hotkey quickly and continuously to enter the BIOS setting interface;
2. Press the left and right arrow keys to move and press Enter to enter the BOOT (or startups) tab. Press the up and down arrow keys to select the startup option. Press the or - key to move the startup option to set the solid state drive as the first startup item and press Enter to confirm. . Some old motherboards need to enter the Advanced BIOS Features tab, press Enter, and then select the SSD or specific hard drive model. Some new motherboards support EFI. After booting, press F12 or F11 to enter the boot options menu. You can directly select the SSD or specific hard drive model to start the computer without entering the BIOS interface;
3. Press F10 to save and exit the BIOS, computer It will restart automatically. If you successfully boot from the hard disk, you will directly enter the system installed on the hard disk.
To enter the BIOS settings of the Colorful Notebook and restart, you can press the power button to turn on the notebook. During the startup process, a brand logo or a shortcut key prompt is usually displayed. You can try pressing these shortcut keys, such as F2, F10, Delete or Esc key, to enter the BIOS setup interface.
Once you enter the BIOS setup interface, you can use the arrow keys and Enter key on the keyboard to browse and change settings. Please note that different models of Colorful notebooks may have different shortcut keys, so please refer to your user manual or find relevant information on the official Colorful website.
1. Use the U disk to boot the Colorful motherboard and press the F12 key.
Second, if it is an earlier motherboard, the shortcut startup key may be f8 or f10. You can check the motherboard manual.
3. If none of the possible keys work, the keyboard may be malfunctioning or the motherboard does not support it. You can press f2 to enter bios to select startup items.
Most desktop computers or laptops start up the shortcut key F12, followed by F9, F11, F8 and ESC keys.
Method
The following are the shortcut keys for various motherboard startup options: ASUS motherboard F8
GIGABYTE motherboard F12
MSI motherboard F11
yingstar motherboard F9
Meijie motherboard ESC or F12
Colorful motherboard ESC or F11
ASRock motherboard F11
Spartak motherboard ESC
Onda motherboard F11
Xiangsheng motherboard F10
Shuangmin motherboard ESC
Elite motherboard ESC or F11
Guanmeng motherboard F11 or F12
Foxconn motherboard ESC or F12
Press del to enter bios after booting, select "AdvancedBios Features", usually the third position in the left column. You can use the direction keys to move the cursor, the Enter key to confirm, the ESC key to return, and the PageUp, PageDown and numeric keys to adjust settings. In any setting menu, you can press the F10 key to exit and save the settings.
Select the devices to be booted as the first, second and third order among the [First Boot Device], [Second Boot Device] and [Third Boot Device] items.
The BIOS will start the operating system in sequence according to the selected boot device! The devices that can be selected depend on the installed devices.
Move the cursor (use the up and down keys) here, select "First Boot Device", press Enter, then move the cursor and select the words CD/DVD.
If you want to enable secure boot on your Colorful motherboard, you can follow the steps below:
1. Enter the BIOS settings: Press the "Del" or "F2" key when the computer starts , enter the BIOS setup interface.
2. Find the "Security" option: In the BIOS setup interface, find the "Security" option and select it.
3. Enable "Secure Boot": In the "Security" option, find the "Secure Boot" option and set it to the "Enabled" state.
4. Save settings and exit: After completing the above settings, press the "F10" key to save the settings and exit the BIOS setting interface.
5. Install the operating system: Now, you can install the operating system that supports secure boot, such as Windows 10, etc. During the installation process, the system will verify that the operating system is legitimate and prevent malware and viruses from infecting your computer.
Please note that when Secure Boot is enabled, only digitally signed operating systems can be booted, which means you cannot easily install an operating system or change operating system files that are not digitally signed. If you need to change operating system files or install an operating system that is not digitally signed, first disable Secure Boot.
If the motherboard itself does not support booting from a USB flash drive, there is nothing you can do. . . . . Generally, Colorful can bring up the startup menu by pressing the shortcut key ESc when it is turned on, and then select the relevant device from the menu to start, but in some cases, you can press F11 when it is turned on. . .
Just try it out. If you select the U disk but it cannot be started, there is nothing you can do. . . . . In fact, if you know how to manually operate the Ghost software, you can also copy the image file to the D drive or E drive of your system, and then download the one-click Ghost system restoration software. There will be a menu when booting, just select the next option. Use the manual method to install your image file to the C drive. This is actually a method of installing the system, but the premise is that your current system can still be entered normally. I just want to change the system. I hope my answer can help you!
The above is the detailed content of How to enter the system with Colorful BIOS?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
