How to enter the USB boot sequence of IBM computer

php editor Youzi will introduce to you how to enter the U disk boot sequence for IBM computers. In some cases, we may need to use a USB flash drive to start the computer, such as system installation or repair. To enter the USB boot sequence, you first need to enter the computer's BIOS setup interface. Usually, you can enter the BIOS settings by pressing the F2, F10, F12 or Delete key when booting. After entering the BIOS, find the startup option, adjust the USB flash drive device to the first place, save the settings and restart the computer to enter the USB flash drive boot sequence.

Computer systems may occasionally have problems, especially some more complex problems that may need to be solved by reinstalling the system. In this case, using a USB flash drive to reinstall the system is a common method. However, you first need to set the computer's startup item to boot from the USB disk. For users who don’t know how to set up a USB boot disk, let me provide you with a simple tutorial. First, insert the USB flash drive into the USB port of the computer. Then, restart the computer. During the computer startup process, press the corresponding key (usually the F2, F10, F12 or Delete key) to enter the BIOS setup interface. In the BIOS setting interface, use the arrow keys to select the "Boot" or "Startup" option, and press the Enter key to enter. In the boot options, find the "Boot Priority" or "Boot Sequence" option and press Enter to enter. In the startup sequence

Set U disk boot:

1. Shortcut key to quickly U disk boot:

In order to restart the computer and select U disk boot, you can follow the following steps . First, keep pressing the shortcut keys while booting until the menu options appear. Some computers will display keys at the bottom of the screen that can be used to set boot options, while other computers may need to enter the BIOS and enable the "BOOT MENU" function. For computers that do not have a hotkey function to select startup items, you can use the second method below to set it up.

Common brand shortcut keys:

2. Enter the BIOS to set the U disk boot:

Whether the BIOS model prompts when entering the CMOS SETUP key screen

AMI Del key or Esc key is present

AWARD Del key or Ctrl key ALt key Esc key is present

MR Esc key or Ctrl key ALt key Esc key no

Quadtel F2 key yes

COMPAQ Press F10 key when the cursor appears in the upper right corner of the screen No

AST Ctrl key ALt key No Esc key

Phoenix Ctrl key ALt key No S key

Hp F2 key yes

For notebooks, except for special models, generally follow the following method:

Thinkpad/IBM (Cold boot press F1, some new models can be started by pressing F1 when restarting)

HP(Press F2 when starting and restarting)

SONY( Press F2 when starting and restarting)

Dell (Press F2 when starting and restarting)

Acer (Press F2 when starting and restarting)

Toshiba (Cold boot Press ESC and then F1)

Compaq(press F10 when the flashing cursor appears in the upper right corner after booting, or press F10 when booting)

Fujitsu(press F2 when starting and restarting)

Most domestic and Taiwanese brands (press F2 when starting and restarting) desktop computers enter the BIOS. When booting, please press the del key multiple times.

You can enter the BIOS. These things are related to the motherboard manufacturer. It's usually determined by the motherboard.

Setting method after entering the BIOS:

1. Find the boot option in the BIOS and move the U disk device to the top (generally press the Shift + /- key to move), as shown in the figure. When finished, press F10 to save and exit.

There are many BIOS styles. You can set them manually by translating them. BIOS Chinese and English comparison table:

#

The above is the detailed content of How to enter the USB boot sequence of IBM computer. For more information, please follow other related articles on the PHP Chinese website!