Because most black screens are basically caused by a certain service in Windows, restart the computer. The problem of black screen with only mouse pointer can be solved. Method 2: Turn on the computer, long press "shift", select safe mode in the menu, log in normally and open it, then restart the computer, and that's basically it.
The computer black screen may be caused by the system resource manager crashing. We first press the "ctrl alt delete" key combination on the black screen interface of the computer, select the task manager to open; find the file in the upper left corner, click "Run New Task"; then enter explorer.exe to confirm. Wait for the system to restart before you can use it normally.
"After the computer is turned on, the display screen is black and only the mouse is left." This phenomenon means that the system is loading, and you can enter the desktop after the loading is complete. When this situation occurs, it is judged that there is a problem with the system, such as too much system garbage, too much redundancy, or system hardware problems; such as a certain block of memory is damaged, a certain area of the hard disk is damaged, etc.
When we see that there is only a mouse on the desktop, we can assume that the explorer is not open. If the screen is completely black, it is caused by a software or hardware failure. First, Ctrl Alt Delete key to open the Task Manager window, as shown below. There is a new task in the lower right corner, click on it.
After the computer starts, although there is no display content, if the computer has the sound of normal operation, it means that the hard disk and memory are normal and the system is normal. It means there is a problem with the graphics card. If possible, try replacing a graphics card.
1. What to do if the laptop has a black screen and only the mouse can move? You can try restarting. Most problems can be solved by restarting. You can try to keep pressing the F8 key. If the interface shown below appears, it can start normally. If that still doesn't work, keep pressing the power button to force a shutdown and try turning it on again after a while.
2. Try to use system restore to restore the system. If an application or driver was recently installed on your computer, you can try to uninstall it before restoring the system. If none of the above resolves the issue, you may need to reinstall your operating system. Before reinstalling, important files and data need to be backed up.
3. It is recommended that you try restarting the computer first to see if the problem can be solved. If the problem persists, you can try troubleshooting by following the steps above.
A black screen may occur when the computer starts up because the motherboard, monitor and graphics card in the computer are damaged, or the computer configuration is too old. Most of the reasons are caused by process errors. You can follow the steps below to troubleshoot.
A black screen on a computer is a relatively common phenomenon, especially in some older computers or assembled computers. If your computer turns on and a black screen appears, but the mouse arrow can move, it may be a problem caused by the explorer.exe system file.
The reason why a Lenovo laptop has a black screen when it starts up boils down to the following points: First, check whether the power contact connected to the laptop is good and whether the power indicator light is on. Friends who are qualified recommend using a multimeter to test whether the laptop power supply has power. Voltage output with the value indicated in the label.
The reasons and solutions for Lenovo notebook black screen with only the mouse visible are as follows: Hardware problems, such as hard drive failure, it is recommended to replace the hard drive. The c drive is full, so it is recommended to clear the memory. Or the c drive is full, causing a system failure, and it is recommended to reinstall the system.
When we see that there is only a mouse on the desktop, we can assume that the explorer is not open. If the screen is completely black, it is caused by a software or hardware failure. First, Ctrl Alt Delete key to open the Task Manager window, as shown below. There is a new task in the lower right corner, click on it.
What should I do if my laptop turns on and the screen is black with only the mouse?
2. If the above method does not solve the problem, download "Drive Life" and upgrade: graphics card driver! Turn on the computer again. If it still doesn't work, you need to "one-click restore" or "reinstall the system". Before reinstalling the system, you need to back up important data to avoid losing it.
3. First of all, it may be a hardware problem. The hardware itself has too many bad sectors, so only the mouse can display. In this case, you can try using a USB flash drive to test the hard drive. If there are too many bad sectors, the only way is to replace the hard drive. Furthermore, it may be that the C drive memory is full.
4. What to do if the computer starts up with a black screen and a mouse. Method 1: Restart the computer, press F8, enter the startup menu, and select "Use last known good configuration" to start the computer.
If the laptop shows that it is preparing for automatic repair when it is powered on, and then the screen is black with the mouse arrows moving, you can try to solve it by following the steps below: Wait for a while, it may take a few minutes. . The automatic repair process may take some time to complete.
The laptop starts up with a black screen and only the mouse arrow. This is caused by a problem with an important process of the system. The solution is as follows: Tools and materials: ASUS Fly Windows Task Manager.
Cause of black screen: Black screen caused by software. Sometimes after installing some software or hardware drivers, you may find that after restarting, the computer cannot enter the system and the screen remains black. In this case, the laptop screen is black due to software.
After the computer is turned on, it is found that the desktop is black and only an arrow is displayed. Solve this problem. Computer: Huawei MateBook System: Windows 10 Software: Local Settings Press the restart button on the computer, and then press and hold F8 on the keyboard.
Solution to the problem of a black screen with only mouse arrows when the Lenovo laptop starts up: First of all, it may be a hardware problem. The hardware itself has too many bad sectors, so only the mouse can display. In this case, you can try using a USB flash drive to test the hard drive. If there are too many bad sectors, the only way is to replace the hard drive.
Press Ctrl Alt Del on the keyboard at the same time. Select "Start Task Manager" in the list. "Task Manager" will pop up. Use the mouse to click "File" - "New Task" in the upper left corner menu, and enter "explorer" in the pop-up "Create New Task" dialog box. ” Click “OK”.
The above is the detailed content of Laptop black screen only shows mouse. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
