php editor Banana brings you a concise tutorial on setting up the BIOS of Colorful motherboard for USB boot. When the computer starts, we often need to use a USB flash drive to install or repair the system, and setting up the USB flash drive to start is a necessary step. By entering the motherboard's BIOS interface, we can easily set up USB boot settings. This tutorial will introduce in detail how to enter the BIOS interface and how to set up the U disk boot on the Colorful motherboard. Follow the step-by-step tutorial to set up, and you will be able to successfully use the USB flash drive to perform various operations, solve computer problems or perform system installation. let's start!
1. First, in the computer startup interface, press the F11 button to enter the bios system.
2. Then move the cursor to the boot option in the interface.
3. Then find the Hard Drive BBS Priorities option inside and press Enter to enter.
4. Then select the Boot Option #1 option and press Enter.
5. Then select the ADATA USB Flash Drive 1100 option in the pop-up window and press Enter to confirm.
6. Finally, press the f10 key and press Enter to confirm. Then you can save the settings and restart.
Colorful motherboard bios
Steps to set up hard drive startup:
1. Shut down your computer first, then press this and press at the same time.
2. Choose now, then choose.
3. Find the boot option #1 and click here on the hard drive.
4. Select your U disk on the menu. Because the USB hard disk inserted here is the USB hard disk, select this one. Choose the name of your USB flash drive.
5. Press at this time and select Yes on the menu. Set it up when booting from the USB disk
Set like this:
1. First, in the computer startup interface, press the F11 button to enter the bios system.
2. Then move the cursor to the boot option in the interface.
3. Then find the Hard Drive BBS Priorities option inside and press Enter to enter.
4. Then select the Boot Option #1 option and press Enter.
5. Then select the ADATA USB Flash Drive 1100 option in the pop-up window and press Enter to confirm.
6. Finally, press the f10 key and press Enter to confirm. Then you can save the settings and restart.
1. You can set startup items. 2. Colorful h510m is a motherboard. You can set the startup items by entering the BIOS interface. Press the corresponding key (usually the Del key or F2 key) during startup to enter the BIOS interface, then find the startup options or boot options, select the startup items that need to be set, such as hard disk, optical drive or USB device, etc., and set them as preferred Startup items. In this way, when booting, the system will first try to boot from this device. 3. In addition, you can also set the startup sequence, which is the priority of the system among multiple startup items. By adjusting the boot order, you can decide which device the system attempts to boot first. This allows you to flexibly select startup items as needed. When setting startup items, you need to pay attention to selecting the correct device and making sure the device is properly connected. If you have multiple hard drives or storage devices, you can also set multiple startup items in case you need them. At the same time, different motherboard brands and models may have slightly different settings. You can refer to the motherboard's user manual or official website for more detailed operating instructions.
1.
After the computer is turned on, press the Del hotkey quickly and intermittently. There are usually English prompts on the left and right bottom;
2.
Keyboard direction keys Move right to the "Boot" menu;
3.
In the Boot interface, move the arrow keys down to "Boot Option #1", and then press enter;
4.
Then select the U disk option and press Enter;
5.
Then press the F10 key on the keyboard to save and exit. A pop-up prompt will appear to select " YES", and then you can enter the USB disk PE system
1. First, insert the USB disk that has been created with the U boot software into the USB interface of the computer, restart the computer, and after the startup screen appears, press the "del" key continuously to enter the BIOS setup main interface.
2. Then find and confirm in order: "Integrated peripherals" - "Onboard device" - "USB Configuration" - "USB2.0 Controller" (USB2.0 controller), change "Disabled" to "Enabled", then press the "F10" key to save and exit and automatically restart the computer.
3. When the computer restarts and enters the startup screen, press the Esc key to enter the first boot sequence selection menu. At this time, you will find that the only two options that you can choose from are "hard disk" and "optical drive". There are three, and there is an option for "USB" mobile devices.
4. Press the direction keys to move the cursor to USB, select it and press the Enter key. The computer will automatically restart and then enter the U boot U disk boot disk main menu interface. Then you can proceed The system is installed on the USB disk.
To set the startup items of Colorful b760m, you first need to enter the BIOS setting interface. After booting, press the Del or F2 key to enter the BIOS, then find the Boot tab, select Boot Option #1, and click the Enter key.
In the pop-up menu, select the device that needs to be set as the startup item, such as a hard disk or a USB flash drive, and click the Enter key again to confirm the selection.
Next, press the F10 key to save and exit the BIOS setup interface, and then restart the computer. If you need to change the startup items, you can repeat the above steps to set them.
Different computer BIOS settings may be different. The following are generally the steps to set the BIOS startup items on Colorful computers:
1. Restart the computer and press the Del key or F2 key to enter the BIOS setup interface. If you're not sure which key to press, pay attention to the on-screen prompts when turning on the phone.
2. In the BIOS setup interface, use the arrow keys to select the "Boot" tab.
3. In the "Boot" tab, find "Boot Option Priorities" or "Boot Order" or similar options.
4. Press the Enter key to enter the "Boot Option Priorities" or "Boot Order" menu.
5. In the "Boot Option Priorities" or "Boot Order" menu, use the arrow keys to select the device you want to set as the first boot item, such as a hard disk, optical drive, USB device, etc.
6. Press Enter to select the device of your choice and move it to the top of the list to set as the first startup item.
7. If you need to set other startup items, please repeat steps 5 and 6 until you have set all the required startup items.
8. After completing the settings, press the F10 key to save and exit the BIOS setting interface.
9. The computer will restart and start in the order of the startup items you set.
Please note that the above steps are for reference only, and the specific steps may vary depending on the computer model and BIOS version. If you're not sure how to set up startup options, refer to your computer's user manual or contact your computer manufacturer's technical support.
First of all, you need to make some settings on your computer to ensure that it can boot from the USB flash drive.
Then, you need to set the boot device in the Colorful BIOS system to the USB flash drive.
Next, insert the prepared U disk into the computer and restart the computer.
During the startup process, press the corresponding shortcut key to enter the BIOS setting interface and select the U disk as the boot device.
Then follow the instructions of the system installer to complete the installation process.
Finally, restart the computer to ensure that the system has been successfully installed. After completing these steps, you can successfully install the Colorful BIOS system using a USB flash drive.
The above is the detailed content of Tutorial on how to set up USB flash drive boot in Colorful motherboard BIOS?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
