Motherboard boot sequence cannot find Kingston?

php editor Baicao | How to find Kingston in the motherboard boot sequence? When you encounter Kingston not found when your computer starts up, it can usually be due to a number of factors. It could be that the hard drive is not connected properly, the hard drive is damaged, the motherboard or BIOS settings are incorrect, etc. To find Kingston, you need to check your computer's hardware connections, hard drive, motherboard, or BIOS settings and take appropriate repair steps.

Can’t find Kingston in the motherboard boot sequence?

1. Turn off the power, open the case, re-plug and unplug the hard drive power cord and data cable (if it is a laptop, just re-plug the hard drive), then turn on the computer, press the DEL key (F2 or other for laptops) Enter the BOOT tab in CMOS to see if the hard disk information can be detected. If possible, set the hard disk as the first startup item. Press F10 to save and press Y to confirm to exit and restart.

2. If the hard disk is detected but still cannot be started, use the system U disk or CD to start the computer, run DISKGENIUS to detect the hard disk and rebuild the master boot record MBR.

3. If the above operations are invalid, you need to reinstall the system. There are many ways to reinstall the system. It is recommended to reinstall the system using CD. The operation steps are as follows:

(1) Prepare the system CD: If you don’t have one, you can go to a computer store to buy it. Buy the latest version of the CD for whatever system you need to install. If you have a CD-ROM drive, you can also go online to download system files in ISO format and burn them into a system CD.

(2) Set up the CD to boot: After turning on the computer, when the motherboard self-test screen or brand LOGO screen appears, press the BIOS hotkey quickly and continuously (different brands and models of computer BIOS hotkeys are different, notebooks are generally F2 key (usually the DEL key on desktop computers) to enter the BIOS setup interface. Press the left and right arrow keys to move and press Enter to enter the BOOT (or startups) tab, select the startup option by pressing the up and down arrow keys, and press the or - key to move the startup option to set the optical drive (CD-ROM or DVD-ROM) as the first boot (Old motherboards need to enter the Advanced BIOS Features tab, press Enter at "1st Boot Device", and then select CD/DVD-ROM), then press F10 to save, exit and restart. Some new motherboards support pressing F12 or F11 after booting to enter the boot options menu, and you can directly select the optical drive without entering the CMOS interface. When restarting the computer, promptly insert the system CD into the CD-ROM drive. After reinstalling the system, be sure to set the hard disk as the first or second startup item.

(3) Clone the installation system: After the CD is started successfully, the function menu will be displayed. At this time, select "Install system to the first partition of the hard disk" in the menu, press Enter to confirm and follow the prompts, or enter the PE system Finally, run the "one-click installation system" on the desktop, and the computer will automatically run the GHOST software to automatically load the GHO file, clone it, and install it in Area C. The entire process requires no manual intervention until the system desktop is finally entered.

Note: After the system installation is completed, first install security software such as 360 Security Guard plus 360 Antivirus or Kingsoft Antivirus and other security software to conduct a comprehensive search and kill Trojans and viruses, then apply system patches and install commonly used software, download and install it and use the one-click restore tool to back up the system in case of emergency.

4. If the hard disk cannot be detected, replace the hard disk power cable and data cable. If it fails, replace the hard disk and reinstall the system.

5. If the CD or U disk boot is set in CMOS before the hard disk starts, you need to remove the non-bootable CD or U disk inserted into the optical drive or the USB interface of the host.

Processor : Intel Core I3-2130 CPU3.40GHZ, motherboard Gigabyte P61-S3, memory Kingston 4G, hard drive?

The CPU and motherboard have been discontinued in 2014. The second-hand price of the whole machine does not exceed 1,500.

If you buy a brand new one, you will now use the fourth generation I3 B85 motherboard, graphics card GTX750TI,

CPU: Core I3 4160 chip 645

Heat dissipation: Overclocked San Jade Bird 3 25

Motherboard: Gigabyte B85M-DS3H 430

Memory: ADATA 8G/1600 Game Dragon 270

Hard drive: Western Digital 500G blue disk 270

Graphics card: GALAXY GTX750TI General 2GD5 860

Chassis: Xianma Miracle 3 100

Power supply: Huntkey jumper400 220

Monitor: AOCI2260SWD 630

3430

How to enter rog motherboard bios?

Method/step-by-step reading

1

/7

After turning on the computer, when the ASUS LOGO screen appears, you can see it in the lower right corner : F2 Enter setup ESC POPUP MENU, immediately press "F2" continuously (be sure to press continuously!)

2

/7

You can enter the BIOS at this time Settings (Note: Sometimes pressing F2 once will not allow you to enter, so you have to press it several times in succession. If the system is win8 and win8.1, you need to press and hold the F2 key in advance after booting, because WIN8 has a quick startup. If you press it too late, You will not be able to enter the BIOS and enter the system directly.). Be sure to pay attention to these.

3

/7

After entering the BIOS, use the arrow keys to select: BOOT (Boot Device Settings)----Boot Device Priority (Boot Sequence Settings)- ---1st Device Priority (first startup sequence).

4

/7

These correspond to (mobile storage device → hard disk → optical disk → network). If you want to set "hard disk" as the first startup, Just change the item behind the 1st Device Priority: the default "Removable Device" to "Hard DRIVE".

5

/7

After entering the BIOS, if you want to boot from the USB disk, first use the direction keys to select: BOOT---Hard Disk Drives (hard disk drive sequence)--1ST DREVE, click the Enter button, and confirm.

6

/7

At this time, the default is the hard disk, and then you need to select USB HDD: Mass Storage Device here. Some U disk brands are: USB HDD: Kingstondt 101 G2 Or Generic- -sd/mmc, then press Enter to confirm.

7

/7

At this time, the settings of the U disk are changed, and you can modify it with the U disk you inserted.

Note: Just choose what you need according to your needs, whether it is the hard disk or the network.

The above is the detailed content of Motherboard boot sequence cannot find Kingston?. For more information, please follow other related articles on the PHP Chinese website!