The method for turning on the PCIe device wake-up function on Gigabyte motherboards is as follows:
1. Enter the BIOS settings: Press the DEL key or F2 key (may vary depending on the motherboard) when turning on the computer to enter the BIOS setting interface.
2. Find the "Power Management Setup" option: Find the "Power Management Setup" option in the BIOS setup interface, and use the arrow keys to enter this option.
3. Find the "PME Event Wake Up" option: Find the "PME Event Wake Up" option in the "Power Management Setup" option, and use the arrow keys to enter this option.
4. Turn on the "PME Event Wake Up" option: In the "PME Event Wake Up" option, select the "Enabled" option, then press F10 to save and exit the BIOS setup interface.
5. Connect the PCIe device: Connect the PCIe device that needs to be woken up to the motherboard.
6. Set up the PCIe device: In the driver of the PCIe device, find the "Wake" option and select the "Allow this device to wake the computer" option.
After the above steps, you can enable the PCIe device wake-up function. It should be noted that not all PCIe devices support the wake-up function. For details, you need to check the device manual or the relevant information in the driver. At the same time, you also need to pay attention to ensuring that the computer is in standby mode rather than shut down when using the wake-up function.
There are several ways to enter the BIOS settings of the Gigabyte motherboard:
When restarting/powering up the computer, when the first prompt appears, immediately press the shortcut key F11, and it will A small selection window will appear, and you can set the startup items.
During the computer power-on self-test (POST) process, press the Del key to enter the BIOS setup interface.
During the computer power-on self-test (POST) process, press the F2 key to enter the BIOS setup interface.
During the computer power-on self-test (POST), press the SHIFT R key, and a prompt box to enter the BIOS will pop up. Select Enter Setup to enter the BIOS setup interface.
Some high-end Gigabyte motherboards have a BIOS switch (BIOS
Switch), which can switch between different BIOS versions. When turning on the computer, press the switch to select the BIOS version you want to enter.
When the computer is turned on, the LOGO logo interface appears. Immediately press the "Delete" key continuously to enter the motherboard BIOS interface.
Enter the motherboard BIOS settings, which are mainly divided into the upper menu bar, left operation bar, right prompt bar, etc.
The main interface displays the host information settings. Below we can also set processor, memory and voltage related parameters.
The method of entering bios settings for Gigabyte motherboards is slightly different depending on the motherboard model. There are usually three methods:
1. Boot Menu key
During the boot process , press the F12 or Delete key, the Boot Menu menu will appear, select the BIOS Setup option to enter.
2. Shortcut keys
During the boot process, press the Ctrl Alt Delete key or the Ctrl Alt Enter key to enter the BIOS settings.
3. Gigabyte EasyTune
If your computer has the Gigabyte EasyTune software installed, you can enter the BIOS settings through the software. In the software interface, click the BIOS button and then select the Enter BIOS option to enter.
It should be noted that the methods for entering BIOS settings on different Gigabyte motherboards may not be exactly the same. You can refer to the motherboard manual or the official website to find the specific method. At the same time, you need to back up important data before entering BIOS settings to avoid data loss due to improper settings.
To enter the BIOS on a Gigabyte motherboard, follow the steps below:
Restart the computer. When you see the GIGABYTE logo appear on the screen, press the DELETE key until you enter the BIOS setup interface. Some Gigabyte motherboards may require pressing the F2 key to enter the BIOS.
If your computer has been turned on and entered the operating system, you can enter the BIOS through the following methods:
a. Under the Windows operating system, click the "Start" button and select the "Power" option Select Restart or Power Off, then hold down the SHIFT key and select the Restart option. This will cause your computer to restart and enter the Advanced Startup Options screen.
b. In the advanced boot options interface, select "Troubleshooting" -> "Advanced Options" -> "UEFI Firmware Settings" or "BIOS Settings". Your computer will restart and enter the BIOS setup interface.
1. When the Gigabyte logo interface pops up at the moment of booting, immediately press the "F12" key to enter the Gigabyte motherboard BIOS interface.
2. After entering the uefi bios interface , set the language display in the upper right corner to the "Simplified Chinese" item;
3. Then we use the left and right arrow keys to move to the "BIOS Function" button in the menu bar. We need to perform U under this option. The boot settings of the disk or CD;
4. Select the top item "Boot Priority #1", and then press the Enter key. A window will pop up, where you can see the name of the U disk. This one is based on TOSH. At the beginning, some U disks start with king;
5. If there is a CD-ROM drive on the computer, it will also be displayed here. If you want to boot from the CD-ROM, select the name of the CD-ROM drive here. After selecting, press the Enter key to confirm;
6. Press After pressing the Enter key, exit the small window, and the U disk has been selected as the first priority boot item;
7. Finally, press the F10 shortcut key to save and leave the uefi bios settings. In the pop-up window Click the "Yes" button.
1. When the Gigabyte logo interface pops up at the moment of booting, immediately press the "F12" key to enter the Gigabyte motherboard BIOS interface.
2. After entering the uefi bios interface , set the language display in the upper right corner to the "Simplified Chinese" item;
3. Then we use the left and right arrow keys to move to the "BIOS Function" button in the menu bar. We need to perform U under this option. The boot settings of the disk or CD;
4. Select the top item "Boot Priority #1", and then press the Enter key. A window will pop up, where you can see the name of the U disk. This one is based on TOSH. At the beginning, some U disks start with king;
5. If there is a CD-ROM drive on the computer, it will also be displayed here. If you want to boot from the CD-ROM, just select the name of the CD-ROM drive here. After selecting, press Enter key to confirm;
6. After pressing the Enter key, exit the small window, and the U disk has been selected as the first priority startup item;
7.Finally press The F10 shortcut key stores and leaves the uefi bios settings, and click the "Yes" button in the pop-up window.
When you are using a Gigabyte motherboard to enter the BIOS interface, you can return to the desktop through the following two methods:
Method 1: Use shortcut keys
Some Gigabyte motherboards use The BIOS marks the "Exit/Quit" option on the main screen. You can activate this option by pressing any of the "Escape", "F10", "F12" or 'Enter' keys, and then follow the on-screen prompts. to exit the BIOS page.
Method 2: Manually exit BIOS
In the BIOS menu, select the "Exit/Quit" option, then select "Save changes and Exit" or "Exit Without Save". This will exit the BIOS with or without saving changes depending on your choice. If you select "Save Changes and Exit", all changes will be saved and the system will reboot to the Windows desktop.
It should be noted that you should be careful when exiting the BIOS, especially when saving changes, be sure to read the prompt message carefully to ensure that you understand the role and impact of the changes. Only in this way can the safety of operation be ensured.
The above is the detailed content of How to enable PCIe device wake function on Gigabyte motherboard?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
