Which version needs to be activated, standard version and data center version? If you are testing, use software activation. It can be used for a period of time. If it is for long-term use, use the activation code to activate Windows Server 2012 R2 Retail Key: [Key] ：NH3KG-P864D-XYCJH-82DMH-4CX8M -- Standard[Key]：KPXD3-FDN73-2XYRP-9GCRW-TQ6PB -- Standard[Key]：TPQN8-XRYYC-VDRQ8-9XK7F-TVHJM -- Standard
How to enter safe mode in Windows Svr 2012 R2 Standard
There are three ways to enter safe mode:
1. Open the run window-enter msconfig-select safe mode
2. Hold down the shift key on the keyboard and click restart-select troubleshooting-select settings-click restart-select safe mode
3. Run the command: Bcdedit /set {bootmgr} displaybootmenu yes to enter In safe mode, if you want to cancel the command, just change YES to no.
Which version do you need to activate, the standard version and the data center version? If you are testing, use software activation, which can be used for a period of time. If you are using it for a long time, use the activation code to activate Windows Server 2012 R2 Retail Key: [Key ]：NH3KG-P864D-XYCJH-82DMH-4CX8M -- Standard[Key]：KPXD3-FDN73-2XYRP-9GCRW-TQ6PB -- Standard[Key]：TPQN8-XRYYC-VDRQ8-9XK7F-TVHJM -- Standard
Which version do you need to activate, the standard version and the data center version? If you are testing, use software activation, which can be used for a period of time. If you are using it for a long time, use the activation code to activate Windows Server 2012 R2 Retail Key: [Key ]: NH3KG-P864D-XYCJH-82DMH-4CX8M -- Standard[Key]: KPXD3-FDN73-2XYRP-9GCRW-TQ6PB -- Standard[Key]: TPQN8-XRYYC-VDRQ8-9XK7F-TVHJM -- Some Standard numbers cannot be If it doesn't work, send me a message.
Put the Windows Server 2012 R2 installation CD into the CD-ROM drive, turn on the computer, and choose to boot from the CD-ROM drive (if the Windows Server 2012 R2 startup disk is made with a USB flash drive, choose to boot from the corresponding USB flash drive), and then You can see the startup interface of Windows Server 2012 R2.
02
Wait for the installation program to start and then enter the input language and other preference setting interface. Select "Chinese (Simplified, China)" for the language, time and currency format to be installed. Keyboard Select "Microsoft Pinyin" as the input method, click the "Next" button, and then click "Install Now".
03
Enter the product installation key. It is on the back of the Windows box. "-" will be automatically added after every 5 characters entered. No manual input is required.
After inputting, click "Next".
04
Select the operating system version to be installed. Note:
Server core installation does not have a graphical interface.
Select "Server with GUI" here, click "Next", then check "I accept the license terms" and click "Next" to continue.
05
Select custom installation in the installation type to manually partition the hard disk.
06
Select "Drive 0" and click "New" to partition the hard disk.
Note:
Windows Server 2012 R2 will create an additional partition, the system reserved partition, which stores the Windows startup files. Click "OK" here.
Select the primary partition where the system will be installed and click "Next".
07
It only takes a minute or two to wait for the installation program to copy the Windows files; it takes about ten minutes to prepare the files to be installed. The installation function and installation updates are very fast. After both are completed, the system will Automatically restart.
08
After the first restart is completed, the system will automatically install the device, and the system will restart when ready.
09
After the second restart is completed, you will enter the interface for setting the Administrator account password. After setting the password, you will enter the lock screen interface.
Press the Ctrl Alt Delete key combination to log in, and enter the correct password to enter the system.
1. First, make a USB boot disk. After completion, copy the downloaded Windows Server 2012 R2 to the USB boot disk.
2. Insert the prepared U disk into the computer where the system needs to be installed, and restart the computer. Wait for the system to restart the computer, enter the U disk boot interface, select "win8 pe standard version" to enter the PE system, then the system will automatically pop up the system installation interface, select the system installation location, and click "OK" after completion.
3. Then, wait for the computer to automatically restart and enter the system installation interface.
4. In the pop-up "Windows Installer" interface, use the default setting options such as installation language, time and currency format, keyboard and input method, and click "Next".
5. In the new window that pops up, click "Install Now" and wait for the system to prepare to enter the next step.
6. In the pop-up "Select the operating system to be installed" interface, select the system version to be installed according to your needs (Note: To select the system version here, you need to select a server with a GUI, so that the GUI graphics mode can be used after the installation is completed. , here select the last system version as a demo for installation), click "Next" after completion.
7. In the pop-up "License Terms" interface, select "I accept the license terms", and then click "Next".
8. Enter "What type of installation do you want to perform", here select "Custom: Install Windows only (Advanced)".
9. Enter the system to automatically install the windows system, and wait for the system to automatically install.
10. After the system installation is completed, click "Restart Now" to restart the system and enter the system configuration.
11. After the system automatically restarts, in the administrator setting interface that pops up, set the administrator password, and click "Finish" after the setting is completed.
12. After the settings are completed, enter the system and press "Ctrl Alt Delete" on the keyboard to enter the system desktop.
13. After successful login, the installation of Windows Server 2012 R2 is completed.
It may be that the password policy causes the account to be disabled or something else. #Such as human causes or poisoning.
Therefore, it is recommended to troubleshoot according to the following ideas:
1. For ad environment, please contact the AD administrator.
2. Non-ad environment, physical host, you can use other normal hosts to create a USB disk to boot and enter pe to unlock. #The physical server may need to write the original Microsoft image, otherwise the raid card driver may not be able to recognize and obtain file information. The same applies to raid models that are not compatible with Microsoft and can be circumvented by injecting drivers.
3. In non-AD environment, virtual machines, such as cas virtual machines, can be unlocked through the cvm management page and mounting iso. The method is similar to cracking a physical host through a CD. It's just possible that the raid card cannot be recognized, which can be circumvented by mounting a floppy disk or injecting an iso CD.
Windows Server 2012 has four versions: Foundation, Essentials, Standard and Datacenter. Windows Server 2012 Essentials is aimed at small and medium-sized enterprises, and users are limited to 25 users. This version has a simplified interface and pre-configured cloud service connections. It is not supported The virtualized Windows Server 2012 Standard Edition provides complete Windows Server functions and is limited to two virtual hosts. The Windows Server 2012 Data Center Edition provides complete Windows Server functions and does not limit the number of virtual hosts. The Windows Server 2012 Foundation version is only provided to OEM manufacturers and is limited to 15 users, provides general server functions, and does not support virtualization.
1. Use the new role and function wizard to install the FTP server.
2. Installation successful.
3. Next, open the IIS administrator. What is different from previous versions is that a new FTP site must be added.
4. Site information.
5. Binding and SSL settings.
6. Verification and authorization information.
7. Complete the new FTP site.
8. The FTP rules have been automatically enabled. Once the settings are completed, remember to restart the host, otherwise there will be unexpected errors (the client cannot connect).
9. The client has successfully connected to the FTP server.
1-Click the first "Server Manager" in the grid menu;
2-Under the "Quick Start (Q)" submenu, click "2 Add roles and Features";
3-Click "Installation Type" on the left, then click "Role-based or feature-based installation", and then click "Next(N)";
4- First click "Select a server from the server pool", and then click "Computer name of this server". There is only this computer on this IP, so just click "Next (N)";
5- Find "Web Server (IIS)" in the role list here, click to select it;
6-The sub-dialog "Add Roles and Functions Wizard" pops up, click "Add Functions" directly;
7-Click "Function" on the left, and check ".Net Framewore 3.5" in the middle;
8-Click "Role Server" on the left again, and select the items that need to be installed in the middle role service list (if You don’t know which ones you need to select, it is recommended that you check them all [except Ftp server]);
The above is the detailed content of How to get Windows Server 2012 R2 key and enter safe mode?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
