Windows clipboard history not working
When the Windows clipboard history is not working, you can check the following steps: 1. Confirm that the clipboard history function is enabled, the path is "Settings> System> Clipboard", and if it is not enabled, Win V will not respond; 2. Check whether the copy content type is limited, such as large images, special formats, or file paths may not be saved; 3. Ensure that the system version supports it, Windows 10 1809 and above, and some enterprise versions or LTSC do not support it; 4. Try to restart the Clipboard User Service service or end the clipups.exe process; 5. Clear the clipboard cache or reset the settings, turn off and then turn on the "Clipboard History" or run the "echo off | clip" command to clean the cache. Most problems are caused by the not enabled settings or the content format is incompatible, so they can be solved by checking them in order.
Windows' clipboard history feature is really convenient, especially when multitasking, it can quickly call previously copied content. But sometimes you will find that it suddenly doesn't work, such as pressing Win V without responding, history is not saved, or only the last content is retained. This problem is actually quite common. Let’s talk about several common causes and solutions.

1. Confirm that the clipboard history function is enabled
Many people think that this function is on by default, but it is not. You need to open it manually:

- Open Settings > System > Clipboard
- Make sure the switch to the right of "Clipboard History" is on
If this option is not turned on, Win V will not pop up any window. And even if it is turned on, it may be reset after restarting. It is recommended to check it.
2. Clipboard content type limitations
Not all content can be saved to history:

- The text is basically fine
- The picture can also be supported, but not too large (it may fail if it is too large)
- File paths and contents in special formats may not be saved
- Copy and paste frequently between multiple programs, some content will be automatically cleared
If you copy images from the screenshot tool, rich text content from web pages, or specific format data copied from certain software, these may not enter the clipboard history normally.
3. Whether the system version supports it
The clipboard history function was introduced in Windows 10 version 1809. If your system is too old, it will naturally not be used:
- Press Win R and enter
winver
to enter - Check the current system version number
If it is not 1809 or higher (such as Win 10 21H2, Win 11, etc.), then you need to upgrade the system. In addition, some enterprise versions or long-term service channel (LTSC) versions do not support this function.
4. Try restarting the clipboard service
Sometimes the clipboard service is stuck, which will cause the history to expire. You can try restarting the related services:
- Press Win R and enter
services.msc
to enter - Find the Clipboard User Service
- Right-click to select "Restart"
You can also check whether there is any clipups.exe
occupation exception in the task manager. If so, you can try to end the process and restart the service.
5. Clear the clipboard cache or reset settings
If all the above is OK but it still doesn't work, you can try resetting the clipboard:
- Open Settings > System > Clipboard
- Close "Clipboard History" and wait a few seconds before opening again
You can also try running the following command to clean the cache:
echo off | clip
This will clear the current clipboard content and sometimes solve the problem.
Basically these common situations. Most of the time, the settings are not turned on or the content format is incompatible, so don’t worry too much. When encountering problems, first check the switch, then check if it is a problem with the system version or content type, and finally consider restarting the service or resetting the settings.
The above is the detailed content of Windows clipboard history not working. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undress AI Tool
Undress images for free

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Clothoff.io
AI clothes remover

Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics









When you encounter the "DefaultGatewayisNotAvailable" prompt, it means that the computer cannot connect to the router or does not obtain the network address correctly. 1. First, restart the router and computer, wait for the router to fully start before trying to connect; 2. Check whether the IP address is set to automatically obtain, enter the network attribute to ensure that "Automatically obtain IP address" and "Automatically obtain DNS server address" are selected; 3. Run ipconfig/release and ipconfig/renew through the command prompt to release and re-acquire the IP address, and execute the netsh command to reset the network components if necessary; 4. Check the wireless network card driver, update or reinstall the driver to ensure that it works normally.

When encountering the "SYSTEM_SERVICE_EXCEPTION" blue screen error, you do not need to reinstall the system or replace the hardware immediately. You can follow the following steps to check: 1. Update or roll back hardware drivers such as graphics cards, especially recently updated drivers; 2. Uninstall third-party antivirus software or system tools, and use WindowsDefender or well-known brand products to replace them; 3. Run sfc/scannow and DISM commands as administrator to repair system files; 4. Check memory problems, restore the default frequency and re-plug and unplug the memory stick, and use Windows memory diagnostic tools to detect. In most cases, the driver and software problems can be solved first.

If the second monitor is not recognized by Windows, first check whether the cable and interface are normal, try to replace the HDMI, DP or VGA cable, confirm the plug-in video output port, and test different interfaces to eliminate compatibility issues; then verify the monitor power and input source settings, and connect the monitor separately to test whether it can be recognized; then enter the Windows display settings and click the "Detection" button, or use Win P to switch the display mode, and update the graphics card driver at the same time; finally check the graphics card specifications to confirm whether it supports multi-screen output to avoid exceeding its maximum output capability.

When the boot prompt is "Windows could not start because of the following fileismissing" 1. You can run bootrec/fixmb, bootrec/fixboot, bootrec/rebuildbcd through the Windows installation media; 2. Check the hard disk connection or use CrystalDiskInfo to detect the health status of the hard disk; 3. If there is a dual system, you can use the bootrec command to rebuild the boot or manually add the boot items; 4. Use PE environment to kill viruses and combine DISM and SFC tools to repair the system files, and the system can be restored in most cases.

The key steps to install PHP on Windows include: 1. Download the appropriate PHP version and decompress it. It is recommended to use ThreadSafe version with Apache or NonThreadSafe version with Nginx; 2. Configure the php.ini file and rename php.ini-development or php.ini-production to php.ini; 3. Add the PHP path to the system environment variable Path for command line use; 4. Test whether PHP is installed successfully, execute php-v through the command line and run the built-in server to test the parsing capabilities; 5. If you use Apache, you need to configure P in httpd.conf

When Windows cannot detect a second monitor, first check whether the physical connection is normal, including power supply, cable plug-in and interface compatibility, and try to replace the cable or adapter; secondly, update or reinstall the graphics card driver through the Device Manager, and roll back the driver version if necessary; then manually click "Detection" in the display settings to identify the monitor to confirm whether it is correctly identified by the system; finally check whether the monitor input source is switched to the corresponding interface, and confirm whether the graphics card output port connected to the cable is correct. Following the above steps to check in turn, most dual-screen recognition problems can usually be solved.

This article provides the download and installation steps of Ouyi computer version client. 1. Visit the official website; 2. Find the download portal; 3. Select the corresponding version; 4. Download and install; 5. Log in to use to ensure that users can quickly complete transaction operations on the PC side.

Error code 0x80070035 is usually caused by network configuration or sharing settings issues. It can be solved through the following steps: 1. Ensure that the two computers are connected to the same network and belong to the same work group; 2. Enable file and printer sharing and network discovery, and turn off password protection sharing; 3. Check SMB version compatibility and enable SMBv1 if necessary; 4. Use IP addresses to test host name resolution and connectivity; 5. Adjust advanced settings such as starting Server services, disabling third-party firewalls, or enabling unsafe guest login. These operations can troubleshoot and fix common problems one by one.
