©
이 문서에서는PHP 중국어 웹사이트 매뉴얼풀어 주다
在头文件 |
|
|
---|---|---|
|
(1) |
|
int wscanf(const wchar_t * format,...); |
(自C95以来)(直到C99) |
|
int wscanf(const wchar_t * restrict format,...); |
(自C99以来) |
|
|
(2) |
|
int fwscanf(FILE * stream,const wchar_t * format,...); |
(自C95以来)(直到C99) |
|
int fwscanf(FILE * restrict stream,const wchar_t * restrict format,...); |
(自C99以来) |
|
|
(3) |
|
int swscanf(const wchar_t * buffer,const wchar_t * format,...); |
(自C95以来)(直到C99) |
|
int swscanf(const wchar_t * restrict buffer,const wchar_t * restrict format,...); |
(自C99以来) |
|
int wscanf_s(const wchar_t * restrict format,...); |
(4) |
(自C11以来) |
int fwscanf_s(FILE * restrict stream,const wchar_t * restrict format,...); |
(5) |
(自C11以来) |
int swscanf_s(const wchar_t * restrict s,const wchar_t * restrict format,...); |
(6) |
(自C11以来) |
从各种来源读取数据,根据其解释并将format
结果存储到给定位置。
1)从中读取数据stdin
。
2)从文件流中读取数据stream
。
3)从空终止的宽字符串中读取数据buffer
。到达字符串的末尾等同于达到文件结束条件fwscanf
4-6)同(1-3),所不同的是%c
,%s
和%[
转换说明每个期望两个参数(通常的指针和类型的值rsize_t
指示所述接收阵列的大小,其可以是1附有%LC读取时成一个单一的宽字符),除了在运行时检测到以下错误并调用当前安装的约束处理函数:
指针类型的任何参数都是空指针
format
,stream
或者buffer
是空指针
%c,%s或%[,加上终止空字符,将会超过为每个转换说明符提供的第二个(rsize_t)参数所写的字符数
可选地,还有任何其他可检测到的错误,例如未知的转换说明符
由于所有的边界检查功能,wscanf_s
,fwscanf_s
,和swscanf_s
仅保证可供如果__STDC_LIB_EXT1__
由实现所定义,并且如果用户定义__STDC_WANT_LIB_EXT1__
的整数常数1
,包括之前
。
流 |
- |
输入文件流从中读取 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
缓冲 |
- |
指向以空字符结尾的宽字符串读取的指针 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
格式 |
- |
指向一个以null结束的宽字符串的指针,指定如何读取输入。格式字符串由非空白宽字符(除%外)组成:格式字符串中的每个这样的字符只消耗输入流中的一个完全相同的字符,或者如果流中的下一个字符不相等,则会导致函数失败。空格字符:格式字符串中的任何单个空格字符都会消耗输入中所有可用的连续空格字符(如同通过在循环中调用iswspace一样确定)。请注意,格式字符串中的“\ n”,“”,“\ t \ t”或其他空格没有区别。转换规格。每个转换规范具有以下格式:介绍%字符(可选)分配抑制字符*。如果存在此选项,则函数不会将转换结果分配给任何接收参数。(可选)指定最大字段宽度的整数数字(大于零),即该函数在执行当前转换规范指定的转换时允许使用的最大字符数。请注意,如果未提供宽度,%s和%[可能会导致缓冲区溢出。(可选)长度修饰符,用于指定接收参数的大小,即实际的目标类型。这会影响转换精度和溢出规则。每种转换类型的默认目标类型都不相同(请参阅下表)。转换格式说明符以下格式说明符可用:转换说明符说明参数类型长度修饰符hh(C99)。h(无)ll(C99)。j(C99)。z(C99)。t(C99)。L%匹配字面值%N / AN / AN / AN / AN / AN / AN / AN / AN /与c匹配的字符或字符序列如果使用宽度说明符,则匹配宽度宽的字符(参数必须是指向具有足够空间的阵列的指针)。与%s和%[不同,不会将空字符追加到数组。N / AN / A char * wchar_t * N / AN / AN / AN / AN / A与非空白字符序列(字符串)匹配如果使用宽度说明符,则匹配宽度或直到第一个空白字符,以先出现者为准。除了匹配的字符外,总是存储一个空字符(所以参数数组必须至少有宽度+ 1个字符的空间)。集匹配字符集中的非空字符序列。如果该集合的第一个字符是^,则不匹配该集合中的所有字符。如果该集合以]或^]开头,则该字符也包含在集合中。它是实现定义的,字符 - 在扫描集中的非初始位置可以指示一个范围,如0-9。如果使用宽度说明符,则只匹配宽度。除了匹配的字符外,总是存储一个空字符(所以参数数组必须至少有宽度+ 1个字符的空间)。d匹配一个十进制整数。数字的格式与wcstol()预期的基本参数为10的值相同。有符号字符*或无符号字符*有符号短符号*或无符号短符号*有符号整数*或无符号整数*有符号长符号*无符号长符号*长符号*长符号或无符号长符号* intmax_t *或uintmax_t * size_t * ptrdiff_t * N / A i匹配一个整数。数字的格式与wcstol()预期的相同,基本参数的值为0(基数由解析的第一个字符决定)。你匹配一个无符号的十进制整数。数字的格式与wcstoul()所预期的相同,基本参数的值为10。o匹配一个无符号的八进制整数。该数字的格式与wcstoul()所预期的基本参数的值为8相同。x,X匹配一个无符号的十六进制整数。数字的格式与wcstoul()所预期的相同,基本参数的值为16。n返回到目前为止读取的字符数。没有输入被消耗。不增加分配计数。如果说明符具有定义的分配抑制运算符,则行为是未定义的。a,A(C99)e,E f,F g,G匹配一个浮点数。数字的格式与wcstof()的预期相同。N / AN / A float * double * N / AN / AN / AN / long long double * p匹配定义指针的实现定义字符序列。printf系列函数应该使用%p格式说明符产生相同的序列。N / AN / A void ** N / AN / AN / AN / AN / AN / A对于除n以外的每个转换说明符,输入字符的最长序列不超过任何指定的字段宽度,并且或者正是转换说明符所期望的或者是期望的序列的前缀,是从流中消耗的东西。在消耗序列之后的第一个字符(如果有的话)仍然未读。如果消耗的序列长度为零或消费的序列无法如上所述进行转换,则会发生匹配失败,除非文件结束,编码错误或读取错误阻止来自流的输入,在这种情况下,它是输入失败。在尝试解析输入之前,除[,c和n之外的所有转换说明符都会消耗并放弃所有前导空白字符(如同调用iswspace一样确定)。这些消耗的字符不会计入指定的最大字段宽度。如果未使用长度说明符l,则转换说明符c,s和[执行宽到多字节字符转换,就像调用wcrtomb()时mbstate_t对象在第一个字符转换之前已初始化为零一样。转换说明符s和[除了匹配的字符外,总是存储空终止符。目标数组的大小必须至少比指定的字段宽度大1。使用%s或%[,不指定目标数组大小,与get一样不安全。固定宽度整数类型(int8_t等)的正确转换规范在标头 |
Conversion specifier |
Explanation |
Argument type |
length modifier |
hh (C99). |
h |
(none) |
l |
ll (C99). |
j (C99). |
z (C99). |
t (C99). |
L |
% |
matches literal % |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
c |
matches a character or a sequence of characters If a width specifier is used, matches exactly width wide characters (the argument must be a pointer to an array with sufficient room). Unlike %s and %[, does not append the null character to the array. |
N/A |
N/A |
char* |
wchar_t* |
N/A |
N/A |
N/A |
N/A |
N/A |
s |
matches a sequence of non-whitespace characters (a string) If width specifier is used, matches up to width or until the first whitespace character, whichever appears first. Always stores a null character in addition to the characters matched (so the argument array must have room for at least width+1 characters). |
set |
matches a non-empty sequence of character from set of characters. If the first character of the set is ^, then all characters not in the set are matched. If the set begins with ] or ^] then the ] character is also included into the set. It is implementation-defined whether the character - in the non-initial position in the scanset may be indicating a range, as in 0-9. If width specifier is used, matches only up to width. Always stores a null character in addition to the characters matched (so the argument array must have room for at least width+1 characters). |
d |
matches a decimal integer. The format of the number is the same as expected by wcstol() with the value 10 for the base argument. |
signed char* or unsigned char* |
signed short* or unsigned short* |
signed int* or unsigned int* |
signed long* or unsigned long* |
signed long long* or unsigned long long* |
intmax_t* or uintmax_t* |
size_t* |
ptrdiff_t* |
N/A |
i |
matches an integer. The format of the number is the same as expected by wcstol() with the value 0 for the base argument (base is determined by the first characters parsed). |
u |
matches an unsigned decimal integer. The format of the number is the same as expected by wcstoul() with the value 10 for the base argument. |
o |
matches an unsigned octal integer. The format of the number is the same as expected by wcstoul() with the value 8 for the base argument. |
x, X |
matches an unsigned hexadecimal integer. The format of the number is the same as expected by wcstoul() with the value 16 for the base argument. |
n |
returns the number of characters read so far. No input is consumed. Does not increment the assignment count. If the specifier has assignment-suppressing operator defined, the behavior is undefined. |
a, A(C99) e, E f, F g, G |
matches a floating-point number. The format of the number is the same as expected by wcstof(). |
N/A |
N/A |
float* |
double* |
N/A |
N/A |
N/A |
N/A |
long double* |
p |
matches implementation defined character sequence defining a pointer. printf family of functions should produce the same sequence using %p format specifier. |
N/A |
N/A |
void** |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
Conversion specifier |
Explanation |
Argument type |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
length modifier |
hh (C99). |
h |
(none) |
l |
ll (C99). |
j (C99). |
z (C99). |
t (C99). |
L |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
% |
matches literal % |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
c |
matches a character or a sequence of characters If a width specifier is used, matches exactly width wide characters (the argument must be a pointer to an array with sufficient room). Unlike %s and %[, does not append the null character to the array. |
N/A |
N/A |
char* |
wchar_t* |
N/A |
N/A |
N/A |
N/A |
N/A |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
s |
matches a sequence of non-whitespace characters (a string) If width specifier is used, matches up to width or until the first whitespace character, whichever appears first. Always stores a null character in addition to the characters matched (so the argument array must have room for at least width+1 characters). |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
set |
matches a non-empty sequence of character from set of characters. If the first character of the set is ^, then all characters not in the set are matched. If the set begins with ] or ^] then the ] character is also included into the set. It is implementation-defined whether the character - in the non-initial position in the scanset may be indicating a range, as in 0-9. If width specifier is used, matches only up to width. Always stores a null character in addition to the characters matched (so the argument array must have room for at least width+1 characters). |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
d |
matches a decimal integer. The format of the number is the same as expected by wcstol() with the value 10 for the base argument. |
signed char* or unsigned char* |
signed short* or unsigned short* |
signed int* or unsigned int* |
signed long* or unsigned long* |
signed long long* or unsigned long long* |
intmax_t *或uintmax_t * |
为size_t * |
ptrdiff_t的* |
N / A |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
一世 |
匹配一个整数。数字的格式与wcstol()预期的相同,基本参数的值为0(基数由解析的第一个字符决定)。 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
在 |
匹配一个无符号的十进制整数。数字的格式与wcstoul()所预期的相同,基本参数的值为10。 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
该 |
匹配一个无符号的八进制整数。该数字的格式与wcstoul()所预期的基本参数的值为8相同。 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
x,X |
匹配一个无符号的十六进制整数。数字的格式与wcstoul()所预期的相同,基本参数的值为16。 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ñ |
返回迄今阅读的字符数。没有输入被消耗。不增加分配计数。如果说明符具有定义的分配抑制运算符,则行为是未定义的。 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
a,A(C99)e,E f,F g,G |
匹配一个浮点数。数字的格式与wcstof()的预期相同。 |
N / A |
N / A |
浮动* |
双* |
N / A |
N / A |
N / A |
N / A |
长双* |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
p |
匹配定义指针的实现定义的字符序列。printf系列函数应该使用%p格式说明符产生相同的序列。 |
N / A |
N / A |
无效** |
N / A |
N / A |
N / A |
N / A |
N / A |
N / A |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
... |
- |
接收参数 |
非空格宽字符除外%
:格式字符串中的每个这样的字符都只消耗输入流中的一个完全相同的字符,或者如果流中的下一个字符不相等,则会导致函数失败。
空白字符:格式字符串中的任何单个空白字符都会消耗输入中所有可用的连续空白字符(如同通过调用iswspace
循环来确定)。请注意,有没有什么区别"\n"
," "
,"\t\t"
在格式字符串或其他空白。
转换规格。每个转换规范具有以下格式:
介绍%
人物
(可选)分配抑制字符*
。如果存在此选项,则函数不会将转换结果分配给任何接收参数。
(可选)指定最大字段宽度的整数数字(大于零),即该函数在执行由当前转换规范指定的转换时允许使用的最大字符数。请注意,如果未提供宽度,%s和%[可能会导致缓冲区溢出。
(可选)长度修饰符,用于指定接收参数的大小,即实际的目标类型。这会影响转换精度和溢出规则。每种转换类型的默认目标类型都不相同(请参阅下表)。
转换格式说明符
以下格式说明符可用:
Conversion
说明符说明参数类型长度修饰符hh
(C99)。
h
(none)l
ll
(C99).
j
(C99).
z
(C99).
t
(C99).
L
%
匹配字面%
N / AN / AN / AN / AN / AN / AN / AN / AN / Ac
一个匹配字符或序列字符如果使用宽度说明,完全匹配宽度宽字符(参数必须是一个指向阵列有足够的空间)。与%s和%[不同,不会将空字符追加到数组。
N/A N/Achar*
wchar_t*
N / AN / AN / AN / AN / As
匹配非空白字符序列(字符串)如果使用宽度说明符,则匹配宽度或直到第一个空白字符,以先出现者为准。除了匹配的字符外,总是存储一个空字符(所以参数数组必须至少有宽度+ 1个字符的空间)。
`[`set`]` matches a non-empty sequence of character from set of characters. If the first character of the set is `^`, then all characters not in the set are matched. If the set begins with `]` or `^]` then the `]` character is also included into the set. It is implementation-defined whether the character `-` in the non-initial position in the scanset may be indicating a range, as in `[0-9]`. If width specifier is used, matches only up to _width_. Always stores a null character in addition to the characters matched (so the argument array must have room for at least _width+1_ characters).
`d` matches a **decimal integer**. The format of the number is the same as expected by [`wcstol()`](../string/wide/wcstol) with the value `10` for the `base` argument.
`signed char*` or `unsigned char*`
`signed short*` or `unsigned short*`
`signed int*` or `unsigned int*`
`signed long*` or `unsigned long*`
`signed long long*` or `unsigned long long*`
[`intmax_t`](../types/integer)`*` or [`uintmax_t`](../types/integer)`*`
size_t*
ptrdiff_t*
N / Ai
匹配整数。数的格式是相同的通过按预期wcstol()
与值0
的base
参数(基部由解析的第一字符确定)。
`u` matches an unsigned **decimal integer**. The format of the number is the same as expected by [`wcstoul()`](../string/wide/wcstoul) with the value `10` for the `base` argument.
`o` matches an unsigned **octal integer**. The format of the number is the same as expected by [`wcstoul()`](../string/wide/wcstoul) with the value `8` for the `base` argument.
`x`, `X` matches an unsigned **hexadecimal integer**. The format of the number is the same as expected by [`wcstoul()`](../string/wide/wcstoul) with the value `16` for the `base` argument.
`n` returns the **number of characters read so far**. No input is consumed. Does not increment the assignment count. If the specifier has assignment-suppressing operator defined, the behavior is undefined.
`a`, `A`(C99)
e
,E
f
,F
g
,G
匹配一个浮点数。数字的格式与预期的相同wcstof()
。
N/A N/Afloat*
double*
N/A N/A N/A N/Along double*
`p` matches implementation defined character sequence defining a **pointer**. `printf` family of functions should produce the same sequence using `%p` format specifier.
N/A N/Avoid**
n
不适用不适用不适用不适用不适用不适用不适用不适用于任何指定字段宽度的最长输入字符序列的 每个转换说明符,或者正是转换说明符所期望的或者是它期望的顺序是从流中消耗的。在消耗序列之后的第一个字符(如果有的话)仍然未读。如果消耗的序列长度为零或消费的序列不能如上所述进行转换,则会发生匹配失败,除非文件结束,编码错误或读取错误阻止了来自流的输入,在这种情况下,它是输入失败。
在尝试解析输入之前,除了[
,,之外的所有转换说明符都会消耗并放弃所有前导空白字符(如同通过调用一样确定)。这些消耗的字符不会计入指定的最大字段宽度。cniswspace
如果l
未使用长度说明符,则转换说明符c
,s
并[
执行宽到多字节字符转换,就像通过在第一个字符转换之前使用初始化为零wcrtomb()
的mbstate_t
对象调用一样。
除了匹配的字符之外,转换说明符s
并[
始终存储空终止符。目标数组的大小必须至少比指定的字段宽度大1。在不指定目标数组大小的情况下,使用%s
或%[
不安全gets
。
The correct conversion specifications for the fixed-width integer types (int8_t
, etc) are defined in the header SCNdMAX
,SCNuMAX
, etc is synonymous with%jd
,%ju
, etc).
每个转换说明符的操作之后都有一个序列点; 这允许将多个字段存储在相同的“汇”变量中。
在解析指数中不包含数字的不完整浮点值时(例如"100er"
使用转换说明符进行解析),会消耗%f
序列"100e"
(可能有效的浮点数的最长前缀),从而导致匹配错误(消耗的序列不能转换为浮点数),"r"
剩余的。现有的实现不遵循此规则并仅回滚消耗"100"
,只留下"er"
例如glibc错误1765。
... - receiving arguments
1-3) Number of receiving arguments successfully assigned, orEOF
if read failure occurs before the first receiving argument was assigned.
4-6)与(1-3)相同,但是EOF
如果存在运行时约束冲突,也会返回。
C11标准(ISO / IEC 9899:2011):
7.29.2.2 fwscanf功能(p:410-416)
7.29.2.4 swscanf函数(p:417)
7.29.2.12 wscanf函数(p:421)
K.3.9.1.2 fwscanf_s函数(p:628-629)
K.3.9.1.5 swscanf_s函数(p:631)
K.3.9.1.14 wscanf_s函数(p:638)
C99标准(ISO / IEC 9899:1999):
7.24.2.2 fwscanf函数(p:356-362)
7.24.2.4 swscanf函数(p:362)
7.24.2.12 wscanf函数(p:366-367)