Detailed explanation of the steps to assemble a computer? What are the steps to assemble a computer?

It’s my first time to assemble a computer. It’s inevitable that I’ll be in a hurry and not know where to start. Today, PHP editor Zimo will bring you the detailed steps for assembling a computer, from preparing materials to final installation of the system, guiding novice users step by step through the assembly journey. The detailed content below will provide you with comprehensive assembly knowledge, allowing you to easily build your own computer.

Detailed explanation of the steps to assemble a computer?

To assemble a computer, please refer to the following steps:

1. First install the CPU, install the CPU fan and CPU together on the motherboard, and fix the screws.

2. Install the memory, insert the memory into the memory slot of the motherboard, and make sure the memory is inserted correctly to avoid compatibility issues.

3. Install the hard drive, fix the hard drive on the 3.5-inch hard drive bracket of the chassis, and insert it into the SATA interface of the motherboard.

4. Install the graphics card, insert the graphics card into the PCI-E slot of the motherboard, and fix the screws.

5. Install the power supply, insert the power supply into the chassis and secure the screws.

6. Install the optical drive. If you need to use the optical drive, insert it into the optical drive compartment of the chassis and fix the screws.

7. Connect the front panel cable of the chassis, find the corresponding interface and insert it into the corresponding interface of the motherboard.

8. Install the operating system and drivers. You can get the corresponding CD or download the corresponding driver when purchasing the hardware.

What are the steps to assemble a computer?

Step 1 of assembling a computer

The first is the installation of the chassis, which mainly involves unpacking the chassis and installing the power supply in the chassis, then installing the motherboard and installing the motherboard on the chassis motherboard , assemble the computer and then install the CPU, insert the required CPU into the motherboard processor socket, and install the cooling fan, assemble the memory module in the computer, and insert the memory module into the motherboard memory slot.

Assemble the computer step 2

The next step is to install the graphics card, select the appropriate slot according to the graphics card bus; assemble the computer and install the sound card. Most of the mainstream sound cards in the market now are sound cards with PCI slots; The installation of drives mainly focuses on the installation of hard disks, optical drives and floppy drives; then there is the assembly of the connections between the computer chassis and the motherboard, that is, various indicator lights and power switch wires. The connection of PC speakers, as well as the connection of power cables and data cables of hard disk, optical drive and floppy drive.

Step 3 of assembling a computer

The third step of assembling a computer is to close the chassis cover. Theoretically, after installing the host, you can close the chassis cover, but in order to avoid problems later For inspection, it is best not to cover it first, and then cover it after the system is installed. Then there is the installation of input devices. When assembling the computer, you also need to connect the keyboard and mouse to integrate with the host; the installation of output devices, that is, the installation of the monitor; and then Recheck each wiring connection and prepare for testing.

Step 4 of Assembling a Computer

Assemble the computer and power up the machine. If the monitor can display normally, it means that the initial installation has been correct. At this time, enter the BIOS for initial system settings. After completing the above steps of assembling the computer, the general hardware installation is basically completed, but to make the computer run, the following installation steps are required.

Step 5 of assembling a computer

The next step is to assemble the computer's partitioned hard drive, format the hard drive, and install the operating system, such as Windows 98 or Windows XP. After assembling the computer and installing the operating system, install drivers such as graphics card, sound card and other drivers; perform a 72-hour bake-in. If there is a hardware problem, it will be discovered during the 72-hour bake-in.

How to assemble a Lenovo desktop computer?

Lenovo desktop assembly is to add memory modules or solid-state drives to the original standard configuration.

Can Lenovo computers be assembled?

DIY is of course possible. There are no technical barriers to this now. As long as you understand a little bit about the basic components and related knowledge of computers, you can assemble your own computer.

Generally speaking, to successfully assemble a computer, you need to purchase the following components:

1. Motherboard

2. CPU that matches the motherboard

3. Graphics card

4, memory

5, hard disk

6, sound card

7, network card

8, chassis and power supply

9, keyboard

10, mouse

11, monitor

OK, now you can build a computer with these, some internal jumpers and wiring , you can refer to the motherboard manual.

How to reassemble a Lenovo computer?

Lenovo computer reinstallation system steps:

1. Make a U disk boot disk, and then copy the downloaded Lenovo win7 system iso file directly to the GHO directory of the U disk:

2. Insert the U disk into the Lenovo computer. After restarting, keep pressing the F12 or Fn F12 shortcut keys to open the boot menu. Select the U disk item and press Enter:

3. Boot from the U disk and enter this In the main menu, press number 2 or press the up and down arrow keys to select Enter to start the pe system:

4. For users who do not need partitions, go to step 6 directly. If you want to completely repartition, you need to back up all files, and then Double-click to open it in the PE desktop, right-click the hard disk, and select:

5. Set the number and size of partitions. The primary partition is 35G or more, and it is recommended to be 50G or more. If it is a solid-state drive, check "Align Partitions". 4k alignment, click OK to perform the hard disk partition process:

6. After partitioning, open it and select the Lenovo win7 system iso image. The gho file will be extracted. Click the drop-down box and select the gho file:

7. Then click "Restore Partition" and select the system disk The location is usually the C drive, or select according to the "volume label" and disk size, click OK:

8. A prompt box pops up, check "Restart after completion" and "Boot Repair", click Yes to start Execute the process of reinstalling the system:

9. Go to this interface, perform the operation of reinstalling the Lenovo win7 system to the C drive, and wait patiently for the progress bar to complete:

10. After the operation is completed , the Lenovo computer will automatically restart. At this time, pull out the U disk, boot into this interface, and perform the reinstallation of the win7 system and system configuration process:

11. Finally boot into the new Lenovo win7 system desktop, Lenovo computer win7 system Just reinstall it.

Computer host assembly steps?

First prepare the tools and components, then disassemble the CPU packaging box and motherboard, install the CPU in the corresponding card slot of the motherboard and install the cooling fan; then install the power supply in the chassis, and at the same time Fix the motherboard inside the chassis; then install the memory card, graphics card, etc. on the motherboard, observe the chassis structure, connect the motherboard and graphics card cables to the power supply, and secure the cables.

What are the steps to assemble your own computer?

Installing your computer is a fun task that can also help you better understand how your computer works and performs. The following are the general steps for assembling a computer by yourself:

Determine the computer configuration: According to your needs and budget, choose the appropriate CPU, motherboard, memory, hard drive, graphics card, power supply and other components, and prepare the necessary accessories and tools.

Assemble the chassis: Open the chassis, install the motherboard bracket, power supply, fan and other accessories, and install the I/O board at the rear of the chassis.

Install CPU and memory: Install the CPU first, then install the memory module, and connect according to the requirements of the motherboard manual.

Install the hard drive and optical drive: Install the hard drive and optical drive in the chassis, and connect the power cord and data cable.

Install the graphics card: If you need an independent graphics card, install it in the PCI-Express slot of the motherboard and plug in the power cord.

Connect the power supply: Connect the power supply to the motherboard, hard drive, optical drive, graphics card and other components, making sure the connection is firm.

Connect peripherals: Connect keyboard, mouse, monitor and other peripherals, and start the computer.

Installing the system: Enter the BIOS according to the steps in the motherboard manual, set the boot order to optical drive priority, and insert the system installation CD to install.

Lenovo computer repair steps?

How to enter the repair mode for Lenovo? When the Lenovo LOGO screen appears when you turn on the computer, press F2 to enter the Lenovo computer rescue system. At this time, select Lenovo one-key recovery (up and down keys to select) or directly press the keyboard Press the "R" key, and another screen will appear. Press the left and right keys to select "Continue". At this time, you will enter "Lenovo One-key Recovery"~! ! There are three options when entering, namely system recovery, system backup and backup uninstall. Select according to the operation you want to perform (or the up and down keys). After selecting, press the enter key (i.e. Enter key), and then there are specific operation methods! Note: If you choose system recovery, please back up the C drive data first to avoid loss. ??

2. When the Lenovo LOGO screen appears, directly press and hold the Shift key and the B key (in order, Shift first and then B). Then you will directly enter the "Lenovo One-Click Recovery"! The operation after entering is the same as above.

3. When the desktop computer is turned on, press F2 to enter the Lenovo rescue system, press shift B to directly enter the system recovery, press F12 to enter the boot menu, and press F4 to enter the random driver and software installation interface.

Can I assemble the Lenovo computer case by myself?

Lenovo computer chassis can be assembled by yourself. Since Lenovo computer motherboards and power supplies are all standard, we can use other brands of chassis to replace Lenovo computer Jixiang. Remove the Lenovo computer motherboard and power supply. After downloading, install it into a new chassis. At the same time, install the hard disk and other components in the chassis so that it can be used normally by connecting a few signal lines.

Is it better to assemble a computer or a Lenovo computer?

It is definitely good to assemble a computer.

Because Lenovo computers are also assembled, why can't you assemble one yourself? You can still choose the accessories yourself. It may not be good if Lenovo's accessories are customized by them. The company's computer is Lenovo. When I took it apart, I found many problems. The connecting cable was too short, the power supply was from an unknown brand, and other accessories were not used well. You can choose the one that suits you best.

The above is the detailed content of Detailed explanation of the steps to assemble a computer? What are the steps to assemble a computer?. For more information, please follow other related articles on the PHP Chinese website!