When assembling a computer host, you often encounter various problems that make it difficult for first-time users to start. PHP editor Strawberry has compiled some common problems for everyone and provided detailed solutions to help everyone solve the installation problem smoothly. The solutions will be introduced one by one in the following details, please check them out.
Seven major steps:
1/7 step-by-step reading
Prepare tools and materials: You need to prepare all the tools and materials needed to assemble a computer host. This includes the computer host itself, monitor, keyboard and mouse, power supply, hard drive, memory stick, processor and radiator, motherboard, optical drive and other accessories.
2/7
Open the main chassis: First, you need to open the main chassis for subsequent installation work. Usually, you can use a screwdriver to turn the screws on the corners of the main case, and then open the main case.
3/7
Install the power supply: The power supply is an important part of the computer host. It is responsible for providing power to the computer host. You need to install the power supply inside the main case and connect it to the motherboard.
4/7
Install the motherboard: The motherboard is the core component of the computer host and is responsible for connecting all hardware devices. You need to install the motherboard inside the main case and connect it to the power supply and other hardware devices.
5/7
Install the memory stick: The memory stick is an important part of the computer host. It is responsible for storing data and speeding up the computer. You need to install the memory stick into the memory slot on the motherboard and make sure the memory stick is securely in place.
6/7
Install the processor and radiator: The processor is the core component of the computer host and is responsible for processing all instructions of the computer. The role of the heat sink is to help dissipate heat from the processor to prevent it from overheating. You need to install the processor into the processor socket on the motherboard and install the heat sink over the processor.
7/7
Install the hard disk and optical drive: The hard disk is an important part of the computer host and is responsible for storing data. The optical drive is an accessory of the computer host and is responsible for reading the data on the optical disc. You need to install the hard drive and optical drive in the hard drive cage or optical drive slot inside the main case and connect them to the motherboard.
The assembly steps are as follows:
1: Tools and components. First of all, you need to prepare the corresponding tools, such as screwdrivers and screwdrivers. Usually, simple tools are given when you purchase the case. At the same time, you must also prepare various components of the host such as motherboard, graphics card, memory stick, CPU, power supply, chassis, etc.
二: Install the CPU. The installation of the host starts with the CPU. Unpack the motherboard and CPU packaging boxes, take out the motherboard, find the location of its CPU interface, press the lever downward to open it, then take out the CPU and align it for installation. Be gentle. Be slow and careful to avoid bending the CPU pins.
Three: Install a cooling fan. If it is a boxed CPU, it will come with a cooling fan, which can be installed on the motherboard together with the CPU. If you purchase a separate cooling fan yourself, you need to apply silicone grease to the CPU before installing the fan.
Four: Install the power supply. Place the motherboard with the CPU installed next to it, first disassemble the case and then install the power supply. Here you need to use a screwdriver to tighten the screws to fix the power supply in the case, and remove some cards on the back of the case to facilitate the installation of the motherboard later.
Five: Install the motherboard. After the power supply is installed, you can fix the motherboard inside the chassis, determine the installation direction, and then use screws to fix the motherboard. Be careful not to make a mistake. You can confirm it by looking at the slot of the graphics card. It is generally easier to find the direction.
Six: Install the memory module. Take out the memory stick. If it is two memory sticks, it is recommended to install it in slot 1-3. If it is a single memory stick, install it in the second slot. After the memory stick is installed, press the fixing rings on both sides to ensure The memory stick will not loosen.
Seven: Install the graphics card. Then take out the graphics card, align it with the slot and install it. At the same time, use a screwdriver to fix the graphics card on the chassis to ensure that the graphics card does not shake left and right, and the interface of the graphics card needs to face the outside of the chassis.
Eight: Wiring. After these are installed, you can observe the layout of the chassis, and then start wiring. In principle, it is better to be as simple as possible. You need to connect the graphics card, motherboard and power supply. At the same time, the motherboard may also need to be connected to the graphics card. Nine: Others. If there is an optical drive on the host, you need to install it on the upper part of the chassis and fix it with a screwdriver. Then connect the power supply and motherboard. After all the cables are connected, you can connect the monitor to test whether it can boot normally.
1. Prepare tools and materials: You need to prepare all the tools and materials needed to assemble a computer host. This includes the computer host itself, monitor, keyboard and mouse, power supply, hard drive, memory stick, processor and radiator, motherboard, optical drive and other accessories.
2. Open the main chassis: First, you need to open the main chassis for subsequent installation work. Usually, you can use a screwdriver to turn the screws on the corners of the main case, and then open the main case.
3. Install the power supply: The power supply is an important part of the computer host. It is responsible for providing power to the computer host. You need to install the power supply inside the main case and connect it to the motherboard.
4. Install the motherboard: The motherboard is the core component of the computer host. It is responsible for connecting all hardware devices. You need to install the motherboard inside the main case and connect it to the power supply and other hardware devices.
5. Install the memory module: The memory module is an important part of the computer host. It is responsible for storing data and speeding up the computer. You need to install the memory stick into the memory slot on the motherboard and make sure the memory stick is securely in place.
6. Install the processor and radiator: The processor is the core component of the computer host and is responsible for processing all instructions of the computer. The role of the heat sink is to help dissipate heat from the processor to prevent it from overheating. You need to install the processor into the processor socket on the motherboard and install the heat sink over the processor.
7. Install the hard disk and optical drive: The hard disk is an important part of the computer host and is responsible for storing data. The optical drive is an accessory of the computer host and is responsible for reading the data on the optical disc. You need to install the hard drive and optical drive in the hard drive cage or optical drive slot inside the main case and connect them to the motherboard.
Generally speaking, if you have a host chassis and power supply, you only need to configure the motherboard CPU, memory, hard disk, graphics card, 32-inch LCD monitor, an optical mouse and a keyboard when installing the computer. .
The central processor is an old machine equipped with a four-core central processor. Plus a matching motherboard. Come on with a 1024 MB memory. Buy another parallel port 1T hard drive. And a graphics card with 512 memory. Most motherboards have network cards onboard. A set of computers equipped in this way can surf the Internet, watch videos, listen to music, and process graphics and images without any problem.
The first step is to screw on the screw posts of the main chassis, align the motherboard with the stud posts and tighten the screws
The second step is to install the corresponding CPU, apply thermal silicone grease and install the radiator
The third step, install the power supply and tighten the screws, and insert the power interface into the interface corresponding to the motherboard.
The fourth step, install the memory module, graphics card, and hard disk.
The fifth step, the main chassis Insert the above LED -, reset -, switch -, and USB data cable into the corresponding pins or interfaces.
The sixth step is to adjust the wire layout of various devices.
The seventh step is to install Choose your favorite operating system, such as: W in7, W in10.
Purchase ASUS motherboard, ASUS graphics card, cpu, memory, hard drive, chassis and power supply and then install it.
The answer is as follows: Assembling a mini computer host requires the following steps:
1. Select the parts of the mini computer host, including motherboard, processor, memory, storage device, power supply, radiator and chassis.
2. Determine the size and connector type of the motherboard and chassis to ensure they match.
3. Install the processor, memory and storage devices onto the motherboard, following the manufacturer's instructions.
4. Install the heat sink and make sure it has good contact with the processor.
5. Install the power supply into the case and connect it to the motherboard and other parts.
6. Install the motherboard into the chassis, making sure the cables are connected correctly and will not be damaged.
7. Close the case and connect the monitor, keyboard and mouse.
8. Turn on the power and start the computer to check if everything is working properly.
The above is the detailed content of How to assemble a computer host? How to assemble a computer host?. For more information, please follow other related articles on the PHP Chinese website!