No display after installing new memory

If you encounter display issues after installing new RAM, the solutions provided in this article may help you. RAM is a vital hardware component in a computer that stores calculations performed by the CPU. Upgrading memory can improve computer performance, but other hardware is also important. Memory upgrades can improve multitasking and gaming experiences.

No display after installing new memory

If your computer is not showing up after installing new RAM, the following suggestions may help. When checking for problems, make sure all cables are connected securely. When installing memory, make sure all components are connected correctly to ensure the RAM is functioning properly.

Below, we have explained all these fixes in detail.

1]Make sure your memory is compatible

When purchasing new memory, the most critical thing is to make sure it is compatible with the motherboard and processor. Be sure to check your motherboard and CPU specifications for details on RAM compatibility.

First, to determine the motherboard and CPU installed in the system, you can enter specific commands at the command prompt to get the motherboard details.

WMIC踢脚板获得产品，制造商

Now, check out your motherboard's specs online. Check the Memory or RAM section to find out the maximum amount of RAM your motherboard supports.

RAM should match your CPU, Task Manager can help you view the details of your CPU. Open Task Manager, switch to the Performance tab, and select CPU to view related information.

After you know which CPU is installed on your system, you can check its specifications online.

Read: How to use Memest86 to test memory

2]Hard reset your computer

We recommend that you hard reset your computer. The process for doing this is as follows:

Check whether the display appears.

Read: What is the biggest misunderstanding many people have about RAM

3]Reset BIOS

Resetting the BIOS to factory default settings can also solve this problem. Since your screen is unavailable, you cannot reset the BIOS by entering the BIOS. Therefore, you have to follow another approach. Open your computer case and remove the CMOS battery. This step will also reset the BIOS to default settings.

Please wait a few seconds after removing the CMOS battery. Now, reinsert the battery and turn on your computer.

Reading: What is the difference between memory and read-only memory?

4]Boot using a memory stick

If you installed multiple memory modules, please check if any of them are damaged. However, this is less likely to happen because you have already purchased a new memory module. Turn off the computer and remove all memory modules from the memory slots. Now, boot your computer with only one memory stick at a time. This way you can check your memory stick.

Besides that, plug your memory stick into a different slot. Try all possible combinations. For example, if your system has 4 RAM slots and you have 2 RAM sticks, plug them into blocks 1 and 2, 1 and 3, etc.

5]Are your memory slots clean?

The problem may also be caused by a dirty RAM slot. We recommend that you use a soft, lint-free cloth to clean your memory modules and memory slots.

6]Check the cable connected to the monitor

You should also check the cables connected to your monitor. If the cable is loose, No Signal will appear on the monitor when turned on.

7]Did you hear the beep?

Your computer motherboard will make a beeping sound whenever a hardware problem is detected. These beeps are called beeps because the motherboard emits these sounds in different codes such as long beep, short beep, three consecutive beeps, etc. Different beep codes represent different hardware problems. Additionally, these beep codes are different for different brands of motherboards.

If you hear a beep, decode the beep to learn the exact problem. You must visit your computer manufacturer or motherboard manufacturer's official website to decode the beep code. Also, check to see if the LED indicator on the motherboard lights up.

Reading: What is dynamic random access memory?

8]Hardware failure

If your monitor is still black and you have compatible RAM installed, it may be a hardware failure. There may be a problem with your computer's motherboard. However, this is less likely to happen. This can happen if your computer is old. You need to get help from a professional computer repair technician to troubleshoot and fix it.

that's all. I hope this helps you.

Can memory cause display problems?

Yes, faulty RAM can cause display issues. If your computer is experiencing display issues, you can perform a RAM test by running a memory diagnostic tool. There are several other signs and symptoms of faulty memory.

Why can my computer be turned on but there is no display?

There may be many reasons why your computer turns on but does not display. Some of the possible causes of this issue include faulty cable used to connect the monitor to the computer, faulty RAM, faulty graphics card, corrupted graphics card driver, etc.

Read next: How to tell if Motherboard is dying on PC.

The above is the detailed content of No display after installing new memory. For more information, please follow other related articles on the PHP Chinese website!