php editor Xinyi will introduce to you the solution to the problem that there is no response when pressing F8 when reinstalling the system on ASUS computers. During the process of reinstalling the system, if there is no response when pressing the F8 key, it may be due to a problem with the system boot settings or a malfunctioning key. Solutions include checking BIOS settings, replacing the keyboard, using system recovery tools, etc. Through these methods, you can successfully solve the problem of ASUS computer not responding when pressing F8 when reinstalling the system, allowing you to successfully complete the system reinstallation and restore normal use of the computer.
If your ASUS computer does not respond after pressing the F8 key, you can try the following measures:
1. Follow the steps below to restart your computer: Click the Windows logo above the computer and select Power option, hold down the Shift key while clicking on the "Restart" option. This will open the Advanced Boot Options screen.
2. In the advanced startup options interface, select "Troubleshooting" > "Advanced Options" > "Startup Settings" > "Restart".
3. At this point the computer will restart and a new interface will open, where you will see "Startup Settings". After selecting "Startup Settings", press the F8 key, and you should be able to enter the startup options interface normally.
If none of the above methods solve the problem, you can try resetting the startup options or updating your operating system to solve the problem. If you encounter any difficulties in operation, it is recommended that you contact ASUS customer service or relevant professionals for consultation and help.
It may be a problem with the USB disk interface.
Solution: 1.
1. There are two ways to enter the boot disk. ASUS Quick Start Press F8 to enter bios After adjustment, the USB disk cannot be seen either
2. After entering, first find Hard Drive BBS Priorities and change the hard drive boot priority setting. After entering, change boot option #1 to your USB disk.
3. Then press f10 to save, restart the computer, and then press the quick start key again, you can see the USB disk.
F8 on the ASUS laptop keyboard switches the monitor output. When the computer is connected to an external monitor or projector, you can use F8 to adjust the video signal output mode. However, the computer's F8 key is used together with the FN hotkey. Press the FN F8 key at the same time to switch the computer's monitor output mode.
If there is no response when pressing the FN F8 keys, you need to download the FN hotkey driver for the corresponding model from the ASUS official website and install it. After the installation is successful, restart the computer and the FN keys will take effect.
1. If there is no floppy drive but the floppy drive is enabled, you can disable the floppy drive.
Press DEL to enter the BIOS after booting, select: STANDARD CMOS FEATURES
DRIVE A: Set to None
DRIVE B: Set to None
Press F10 to save , enter "Y" and press Enter.
2. There is a problem with the memory or the CPU frequency has been changed. Just replace the memory and restore the BIOS default values.
3. Originally, two hard drives were connected and were set to dual hard drives in the BIOS. Later, when one of them was removed, but the BIOS settings were forgotten to be changed back, this problem would also occur.
Just restore the BIOS default values.
4. If the above settings are invalid, it may be that the COMS battery is out of power. Turn on the host, remove the button-type COMS battery, and replace it with a new battery.
5. If the BIOS settings have been changed, please restore the BIOS to the factory settings.
F8 is a safe mode that is essentially different from F1. If you can only enter the safe mode, please read the answer below.
1) First soft and then hard, reinstall the operating system, do not install software, patches, drivers, etc., and see if there are still problems when booting? If you are not installing drivers, patches, and software step by step, don't install anything that is inappropriate.
Please note: If you install drivers, patches, software, etc. after restoring the system or reinstalling, be sure not to install the things that affected your accident this time, otherwise the restoration or reinstallation will be in vain. .
2) If it is caused by a hardware problem, it is recommended to have it checked.
Some motherboards press F8, some press F9, some press F11, some press F12, and some press ESC. You can try them all. Generally, there will be a prompt on the screen when the computer starts. You can also pay attention to it. have a look
The above is the detailed content of What should I do if there is no response when pressing f8 when reinstalling the ASUS system?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
