The failure of the built-in microphone of Apple Mac computers is a common problem, causing a lot of trouble to users. Regarding this problem, PHP editor Xiaoxin has compiled some solutions for everyone, hoping to help users who encounter this problem. When encountering Mac microphone failure, users can try to solve the problem by restarting the computer, checking system settings, cleaning the microphone hole, etc. If the above doesn't work, hardware repair or replacement may be required.
If the microphone on Apple computer is silent, it may be an interface or setting problem. Make sure the microphone is properly connected to the computer's pink jack, otherwise it will cause silence. In the speaker settings in the lower right corner, enter the recording device and set the current microphone as the default device in the recording options.
The specific steps to adjust microphone permissions on your computer are as follows: Click the Apple icon, select Settings, enter Security and Privacy, and then click Privacy Options. Find the microphone, click the lock icon and enter the password to unlock it, then check Allow apps to access the microphone on the right.
First, click the [Gear] icon at the bottom as shown by the arrow in the picture below. Next, open the [System Preferences] window, and then click the [Sound] icon according to the arrow. Finally, in the [Sound] window, find the location pointed by the arrow and uncheck the [Mute] option.
The inability to use the microphone when the Bluetooth headset is connected to the Mac may be caused by incompatible software. It is understood that this may be caused by specific video calling software or general chat software not supporting the use of the microphone function of Bluetooth headsets.
The method to solve the problem that the microphone cannot be used after the Bluetooth headset is connected to the computer is as follows: First, open the computer settings, enter "sound" and search. Select the "Sound" option and click the left mouse button. In the pop-up window, confirm whether the Bluetooth headset is connected. If it shows not connected, try pairing the Bluetooth headset again and click Connect. Make sure Bluetooth headphones are selected as the default input device in the sound settings. Restart your computer and test microphone functionality.
First of all, make sure that the hardware is not faulty. If there is no problem with the speakers and sound card, and tested on other devices, confirm that the cables are connected correctly. Then turn on the speaker and turn up the volume.
To reset Bluetooth without restarting your entire Mac, go to Bluetooth in System Preferences and turn off Bluetooth. You can also toggle Bluetooth via the menu bar icon. After turning on Bluetooth, try connecting the device again.
When there is no sound from the Apple Mac computer, you can first try to adjust the volume setting in the system settings. Click the speaker icon in the menu bar at the top of the screen and make sure the volume slider is unmuted and the volume is moderate. If there is still no sound, you can try replugging and unplugging the headphones or external audio device to make sure the connection is normal. Alternatively, you can restart your computer to resolve sound issues. If the above method does not work, you may need to check the hardware device or perform a system update.
2. The details are as follows: In OS, open Apple. Open the settings of your computer on Apple. Turn on its [sound]. Open its [Input]. Click [Built-in Microphone].
3. Restart your Mac computer. This can sometimes solve sound problems. If the above steps cannot solve the problem, there may be a problem with the Mac's sound driver or audio hardware. You can solve the problem by upgrading the operating system or reinstalling the sound driver.
4. When there is no sound from the Apple Mac computer, the speaker in the menu bar at the top of the screen will be displayed in gray and do not use it. As shown in the picture, we may all press the control on the keyboard at the beginning. Press the sound button to see if the sound is turned off.
Network failure. Mac refers to the operating system of the computer. Due to network failure, when using the DingTalk software, the microphone permissions may not be displayed. You need to check the network and try again. A microphone is an energy conversion device that converts sound signals into electrical signals.
Explanation The inserted microphone does not support the environmental noise reduction function. Mac computers will generally recognize the relevant performance. If it cannot be recognized, it is basically gone.
No sound from the Apple computer microphone is a problem with the interface or settings. The microphone must be connected correctly to the pink jack of the computer. If it is connected incorrectly, there will be no sound during the test. Microphone settings, the small speaker in the lower right corner, the recording device sets the existing microphone as the default device during recording.
No sound from the Apple computer microphone is a problem with the interface or settings. The microphone must be connected correctly and connected to the pink jack of the computer. If it is connected incorrectly, there will be no sound during the test. Microphone settings: Right-click the small speaker in the lower right corner. The recording device will set the existing microphone as the default device during recording.
1. Solution to the problem of no sound from the iPhone 13 microphone: Make sure the microphone is not blocked by objects. You can check to see if a phone case or other object is blocking the microphone. If so, move it out of the way. Make sure the microphone is not damaged. You can try using other applications to test whether the microphone is working properly. Check your phone settings.
2. There is no sound from the microphone of the Apple phone. It may be that the microphone permission is disabled. The operation method to open the permission is as follows: iPhone13 iOS12 General Settings Open the settings on the phone. Click Privacy on the page. Find and click Microphone on the privacy page.
3. Tools required to enable microphone permission. Take the Apple 7 mobile phone as an example to start the detailed operation process. First, find the application "Settings" on the desktop of the phone and click to enter the new interface. Then, after entering the settings interface, find the "Privacy" option and click to open it.
4. The failure to enable the microphone on the Apple phone is because the app does not have permission to use the microphone. Users can enable microphone permissions for them as needed. iPhone is a series of smartphones developed by Apple in the United States and equipped with its iOS operating system.
5. Headphone issues Sometimes, users may forget to take the headphones out of the device, which will cause the microphone to not work properly. If there is no sound when making a call, you should check that the headset is plugged in correctly and that the device is still connected to the headset.
Conclusion: The above is all the content about Apple Mac microphone failure introduced by this site. I hope it will be helpful to everyone. If you want to know more about this aspect, remember to bookmark and follow this site. .
The above is the detailed content of Apple mac microphone malfunctions (what should I do if there is no sound from the mac microphone). For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
