php editor Xiaoxin is here to answer the question "What should I do if Jingyue enters the BIOS interface as soon as I turn on the computer?" When our computer enters the BIOS interface directly after booting, it may be caused by some setting problems or hardware failure. There are many ways to solve this problem. We can try to solve it by checking the hardware connection, resetting BIOS settings, updating BIOS firmware, etc. Let’s learn about the specific solutions below!
Jingyue displays a series of numbers as soon as it is turned on. 2. If the hard disk cannot be recognized due to a BIOS error, press f9 in the Main interface to display the prompt and press Enter, and finally press F10 to save and exit.
If the above method does not work, it is recommended to contact Jingyue official customer service for help.
The steps to enter the bios of Jingyue Board are:
1. Turn on the computer. When the startup screen appears on the computer screen, press the del key continuously to enter the main bios setting page. Press the ↑↓ keys to select "Advanced" Setup" and press Enter to confirm,
2. Then in the pop-up interface, press the ↑↓ keys to select "Removable device priority" and press Enter,
3. In the new pop-up interface, still Press the ↑↓ keys to select the first startup item, which is "1st Drive" and press Enter, then select the U disk item just inserted into the computer in the small window that pops up. Here, it is named after the initial name of the U disk,
4. After the settings are completed, press the shortcut key F10 to save and exit, and then restart the computer to start directly from the USB disk.
Updating the BIOS requires the following steps. First, go to the Elite official website to find the corresponding motherboard model and BIOS version, and download the latest BIOS file. Then store the BIOS file into a FAT32-formatted USB flash drive and insert it into the USB interface of the motherboard. Enter the BIOS interface, find "Advanced BIOS Features", select "Boot Sequence", and place the USB disk in the first boot position. Save the settings and restart the computer. It will automatically enter the BIOS update interface. Just select the BIOS file to update. It should be noted that during the BIOS update process, the power must not be cut off or the update stopped, otherwise the motherboard may not start normally.
The BIOS settings of the H97M-VH motherboard mainly include the motherboard startup sequence, CPU and memory settings, power management, and the configuration of the hard disk and other peripherals.
You can press the specified key to enter the BIOS interface when the motherboard is turned on, and then adjust the corresponding settings as needed, such as setting the boot sequence to boot from a specific device, adjusting the frequency and voltage of the CPU and memory, etc. You can also perform Power management, setting power saving mode and wake-up events, and finally configuring the working mode and connection mode of hard drives and other peripherals.
After the adjustment is completed, press Save and Exit to apply the BIOS settings to the system.
The steps to update the BIOS for Jingyue X99 motherboard are as follows: Download the latest BIOS file from the official website and make sure the file is for Jingyue X99 motherboard. Unzip the downloaded BIOS file and copy the .bin file in the compressed file to the root directory of the USB flash drive. When the computer is turned off, insert the USB flash drive, restart the computer, and keep pressing the startup shortcut key to enter the BIOS interface. In the BIOS interface, use the arrow keys to switch to the "BOOT" interface. In the BOOT interface, select the USB device (the option with the USB disk name) and press the F5 or F6 key to move it to the top. Press the F10 key to save and exit. The computer will automatically restart and boot from the USB flash drive. In the BIOS setup interface, select the "Update BIOS" option. In the pop-up window, select the "Upgrade from USB disk" option. In the pop-up window, select the latest BIOS file that has been copied to the USB flash drive. Click the "Start Upgrade" button and wait for the upgrade to complete. It should be noted that during the BIOS update process, do not turn off the power or restart the computer to avoid irreparable damage. At the same time, in order to ensure a successful update, it is recommended to back up important data before updating.
"Esc" or "F12".
1. Press ESC or F12 while turning on the computer to enter the BIOS.
2. In the Boot menu, set secure to disabled.
3. Set Boot List Option to UEFI.
4. Select USB as the first boot item in 1st Boot Priority.
5. Select Save changes and reset in the Exit menu to save and exit.
When the computer merchant icon appears when the computer is turned on, press and hold the F2 key to enter the BIOS interface. Most computers hold down the F2 key, but some computer brands press F1 or other keys.
Press the down key, select to enter the BIOS advanced settings, and then press Enter.
In the BOIS interface, use the arrow keys to select, the Enter key to confirm, and the ESC key to return.
The steps to set the BIOS startup sequence of Jingyue motherboard are as follows:
1. Press the DEL key after booting to enter the BIOS interface;
2. After entering the BIOS, find "Boot" (Boot) tab;
3. Under the "Boot" tab, find the "Boot Option Priorities" option;
4. After entering the "Boot Option Priorities" option, you can see the startup sequence list of the current computer. You can use the PageUp and PageDown keys to adjust the startup sequence, or you can use the " " and "-" keys to add or delete startup items;
5. After completing the adjustment, press the F10 key to save the settings and exit the BIOS.
Under normal circumstances, the boot sequence should be set to boot from the hard disk first, followed by external devices such as CDs and USBs, and finally network boot. This ensures that the computer starts properly and prevents malware such as viruses from spreading through external devices.
Yes, MSI’s Jingyue H610M-VDH motherboard supports BIOS speed adjustment. In the past, many MSI motherboards used "control CPU fan mode" or "CPU fan smart mode" to adjust speed. These options can generally be found in the BIOS settings. The specific operation can be as follows:
1. Boot into the BIOS settings: Press the DEL or F2 key and other BIOS setup keys to enter the BIOS settings when turning on the computer.
2. Find the fan control option: In the BIOS settings, find the fan control related option, which may sometimes be called "Hardware Monitor" or "System Monitor".
3. Adjust fan control options: Select "Manual", "Auto" or other fan control modes according to your needs, and then save the settings.
Elite motherboard is a high-performance motherboard suitable for users with high installation requirements. The following are the steps to set up the Elite motherboard:
1. Install the CPU: Select the appropriate CPU according to the CPU type supported by the motherboard, and install it correctly into the CPU slot of the motherboard according to the instructions.
2. Install memory: Select the appropriate memory module according to the memory type and number of slots supported by the motherboard, and install it correctly into the memory slot of the motherboard according to the instructions.
3. Install the graphics card: If you need an independent graphics card, select the appropriate graphics card and insert it into the PCI-E slot of the motherboard. 4. Connect the hard drive and optical drive: Connect the hard drive and optical drive to the SATA interface on the motherboard and connect the power cord.
5. Connect the power supply: Connect the power supply to the 24pin and 8pin power interface of the motherboard.
6. Connect the monitor: Connect the monitor to the output interface of the graphics card.
7. Connect other devices: Connect keyboard, mouse, speakers and other peripherals as needed.
8. Close the chassis: Install the motherboard into the chassis and close the chassis cover.
9. Boot settings: Follow the instructions in the motherboard manual, enter the BIOS setting interface, and make corresponding settings as needed, such as setting the startup sequence, adjusting the CPU frequency, etc.
10. Install the operating system: Select the appropriate operating system as needed and install it according to the operating system installation process.
The above is the detailed content of What should I do if Jingyue enters the bios interface as soon as it is turned on?. For more information, please follow other related articles on the PHP Chinese website!
Computer screen shows no signal
What causes the computer screen to turn yellow?
Why does the computer automatically restart?
How to adjust computer screen brightness
How to remove the border of the text box
How to open vsd file
Causes and solutions of runtime errors
How to use a few thousand to make hundreds of thousands in the currency circle
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
