Old motherboard bios settings

Steps for setting Gigabyte motherboard bios to AHCI

Press DEL when booting to enter bios settings; select the Advanced tab; select the compatibility option of the SATA interface in Configuration; SATA interface mode, the options are IDE and AHCI mode; just save and exit.

After pressing the power button to turn on the host, when the GIGABYTE motherboard graphical interface appears, press the DEL key to enter the motherboard's BIOS settings. After entering the BIOS, if you find that the interface is in English, you can click on the upper right corner of the picture below, where you can switch to Chinese display, as shown by the arrow in the picture below.

Press the ↓ direction key to select IntegratedPeripherals and press Enter; select SATAConfiguration and press Enter. The Options dialog box will pop up. Select AHCI and press Enter to turn on AHCI. Finally, press F10 to save and restart.

Question 9: Set the GIGABYTE motherboard BIOS to AHCI. The specific steps are as follows: Turn on the computer and press DEL to enter the BIOS settings. Select "Integrated Peripherals" - "SATA Configuration". Select "AHCI" for SATA mode. Save and leave, restart your computer.

How to set up the motherboard BOIS

1. There will be a screen prompt shortly after turning on the computer, and then press F2 according to the prompt to enter the BIOS interface. You can also press F12 and select "BIOS SETUP" in the menu to enter.

2. Restart the computer. Click the restart button. When the computer restarts, press F2 to enter the computer logo pattern (some computers need to press it). Then You will enter the setting interface, press the key on the keyboard to select "Advanced BIOS Featuresv" and click Enter.

3. The steps to enter the BIOS settings are as follows: Use the startup hotkey to quickly set up the boot, and immediately enter the first interface Press the "DEL" key to enter the interface. Enter the BIOS main interface for settings.

How to set in the BIOS and restore the BIOS default settings

Enter the BIOS settings and move the cursor to Load Optimized Defaults On the page, LOAD OPTIMIZED DEFAULTS means to load the factory default values, that is, the optimized settings under normal circumstances.

Query the bios startup shortcut key corresponding to the computer, and keep pressing the key while booting to enter the bios setting interface. Then , switch to the Exit menu, select LoadSetupDefaults and press Enter. Then, in the pop-up SetupConfirmation confirmation dialog box, select Yes and press Enter.

Step 1: Keep pressing the Delete key when the computer is turned on (notebooks are generally F2 key) to enter the BIOS setup interface. Step 2: Select under the menu and press Enter. After selecting, press Enter again.

After reconnecting the power and turning on the computer, press and hold delete to enter the BIOS reset. Note : For the actual location of CLRTC on each motherboard, please refer to the instructions provided on the product support page. Press del after booting to enter the BIOS and press F5 Default. Select Yes, and the BIOS will be restored to the default value.

Press F2 to enter after booting In the BIOS setting interface, use the small keyboard arrow keys to select the second item Devices. You can choose to turn off a USB interface individually (you can set it according to your own needs) front USB ports (front) and rear USB ports (rear).

How to restore the motherboard BIOS to factory settings

1. Use the motherboard to clear the BIOS settings. Depending on the motherboard, there are the following methods: a. CLRTC two-pin type, please shut down and unplug it With the power cord connected, touch the two pins lightly with a metal object, such as a screwdriver or other conductor, for about 510 seconds.

2. Check the BIOS startup shortcut key corresponding to the computer, and keep pressing the key while turning on the computer to enter bios setting interface. Then, switch to the Exit menu, select LoadSetupDefaults and press Enter. Then, in the pop-up SetupConfirmation confirmation dialog box, select Yes and press Enter.

3. If you want to restore the computer's motherboard For factory settings, I think you can use shortcut keys to enter the BIOS interface and find the Load SetupDefaults option, where you can adjust the settings accordingly.

The above is the detailed content of Old motherboard bios settings. For more information, please follow other related articles on the PHP Chinese website!