Unable to start plug-and-play system: Solution to the problem that the 2002 motherboard cannot start normally after removing the USB flash drive after installing the system

What should I do if the motherboard from 2002 still fails to start after unplugging the USB system disk after installing it?

The motherboard does not support USB booting? In fact, all motherboards support USB booting and cannot recognize the USB flash drive. Most of the time, the bios settings block the USB flash drive. Just change the settings. Taking the 845GV motherboard as an example, the BIOS settings of the 845GV motherboard are very rich in U disk boot options. USB-FDD USB-HDD USB-CDROM USB-ZIP are all available. But at the beginning, each setting item cannot boot the U disk. Among the items of [First Boot Device], [Second Boot Device] and [Third Boot Device], choose the ones to be booted as the first, second and third order. The settings all failed. At this time, enter the BIOS again and observe carefully. Open a Boot Other Device (the default is disable), turn it on (enable) and then set the First Boot Device to USB-CDROM (in order to avoid errors, set the other two items to USB-CDROM as well). Now restart your computer, and you will unexpectedly find that you can successfully boot into the USB disk. Then enter PE and run u to start the one-click installation tool, and the system can be successfully installed! In fact, if you observe the above, you can find the problem.

Which generations of motherboards cannot install win10?

Win10 can be installed on old motherboards, at least on my P35 motherboard. However, although it can be installed and used normally, the display driver often loses response and recovers, and sometimes restarts. After using it for a year, I modified Win7.PS: I personally feel that Win7 is not easy to use, but Win10 can be used. It can be installed on old motherboards, at least my P35 motherboard can. However, although it can be installed and used normally, the display driver often loses response and recovers, and sometimes restarts. After using it for a year, I modified Win7.PS: I personally feel that Win7 is not easy to use, mouse

My computer motherboard is too old, how do I set up a USB flash drive to boot?

1. Press the power button to turn on the computer, and press F11 on the startup interface to enter the motherboard BIOS interface.

2. After entering the motherboard BIOS page, find the boot option and click to enter.

3. Next, click on the current page to enter the HardDriveBBSPriorities option.

4. After entering the HardDriveBBSPriorities interface, find the BootOption#1 option and press Enter to enter.

5. Then select the ADATAUSBFlashDrive1100 option on the current page and press Enter to confirm.

6. Finally, press the f10 key and press the Enter key to confirm. The USB boot item will be set.

The motherboard does not support USB boot?

You can follow the steps below to install the system disk:

1. Buy a win7 CD and put the system CD into the CD-ROM drive.

2. Turn on the power, and then observe the screen prompts. Before starting the system, press "F2 to set up the BIOS.

3. Set the startup mode. Find the boot option, and there is the first startup , usually 1st Boot Device, move the cursor to it, press the Enter key to enter and select the item with the word DVD, and press the Enter key to confirm.

4. Some key methods for moving the cursor depend on the direction of the keyboard. keys, some are F5 and F6, this is the prompt on the screen. Then press F10, select yes, press the Enter key to confirm, and then the computer will automatically restart.

5. At this time, boot from the CD and enter the installation system interface, follow the system prompts and operate step by step. The installation process will restart multiple times.

The above is the detailed content of Unable to start plug-and-play system: Solution to the problem that the 2002 motherboard cannot start normally after removing the USB flash drive after installing the system. For more information, please follow other related articles on the PHP Chinese website!