This site will share the solution to the problem that Apple Mac cannot connect to the router. If it can help you, please pay attention to this site. Get started now!
For Apple computers’ Wi-Fi connection problems, there are two common reasons that may cause weak signals or unstable connections. First, if your computer is far away from the Wi-Fi router or there are obstacles interfering with it, this may affect the signal strength. You can try moving your computer closer to the router to remove physical obstacles, or use a signal booster to strengthen the Wi-Fi signal. Secondly, if your Wi-Fi network settings are incorrect, it may also cause an unstable connection. You can try to reconnect to the Wi-Fi network or restart the router to solve this problem.
2. When the IP address conflicts, you can try to reconnect to WiFi by entering the network settings to manually change the IP address. If you encounter problems with your router overheating, you can try turning off the router, letting it sit for a while and then turning it back on. The problem will usually be resolved. For system errors, you can try restarting the system, which may solve the problem. If wireless network signals conflict on the same frequency band, you can try adjusting the frequency band settings of your wireless router.
Try to restart the router, delete the wireless network cable configuration file and reconnect to the wireless to solve the problem of being unable to connect to the wireless. If the router is running for a long time, it may become impossible to connect.
Please check whether the WiFi switch is turned on and make sure the WiFi switch of the laptop is turned on. You can find it in the menu bar in the upper right corner of the screen. At the same time, please confirm whether the WiFi password you entered is correct to avoid input errors.
The inability of Apple computers to open web pages may be caused by abnormal network connections. This may be caused by incorrect proxy settings or DNS server settings. The webpage cannot be opened properly because it cannot connect to the network.
After a long period of operation, the optical modem and wireless router may have some problems, such as heat and IP allocation errors, causing the mac to be unable to obtain the correct IP address and thus unable to access the Internet. If this happens, you can try the following steps to solve it: First, turn off the optical modem and wireless router, then wait for tens of seconds before restarting them. After the restart is complete, you can surf the Internet normally.
The Apple laptop suddenly cannot connect to WiFi for the following reasons: the computer's WiFi switch is not turned on or the WiFi signal is gray and cannot be clicked. You can check and turn on the WiFi switch in settings. In addition, entering the wrong WiFi password is also a possibility. You can re-enter the correct WiFi password in settings.
If you cannot connect to the network, restart the router or contact the network service provider to solve the problem.
The Apple computer is connected to wifi but cannot access the Internet. It may be because the wireless IP needs to be reset. Here are the specific steps: 1. Click the Apple icon in the upper left corner of the screen. 2. Select [System Preferences]. 3. In System Preferences, find and click the [Network] option. 4. On the network settings page, select Wireless Network Connection on the left. 5. Click the [Advanced] button on the lower right. 6. In the advanced settings, switch to the [TCP/IP] tab. 7. In the TCP/IP tab, click the [Renew DHCP Lease] button on the right. 8. Confirm the operation of resetting the wireless IP. 9. Close the network settings page, try connecting to wifi again and check whether you can access the Internet. The above are the steps to operate on MacBook Pro
When the Mac computer cannot connect to the wireless network, or cannot find the wireless network, you can Try turning wireless off and on again in the system. Method: Restart Mac If turning off wireless in the system does not work, you can try restarting the Mac computer to allow the system to initialize.
Check whether WLAN is turned off. On some laptops, there is a wireless function (WLAN) switch. If you accidentally turn off the wireless function, as shown in the figure below, then your laptop will definitely search There is no wifi signal anymore.
Signal range problem. There is no available WiFi network around or the signal is very weak. Move closer to the router and restart the router. The latest drivers are not installed. You can select Software Update in System Preferences to check for available updates and install them.
Configuration issues In the Mac system's Network Preferences, try deleting the existing Wi-Fi network configurations and re-adding them. Insufficient signal strength: If you are too far away from your Wi-Fi router or the signal is interfered with, you may not be able to successfully connect to the network.
Send it to the Apple mobile phone store for maintenance; if it is just a wifi that cannot be found, it is recommended that you restore the factory settings of the router.
You can try to delete the previously connected wireless network in the wireless network configuration of the Mac system, and then search for the network again and connect. Open the wireless network icon at the top of the screen and click the "Open Network Preferences" option.
1. The solutions to why Mac cannot connect to WiFi are: Restart the router. If you leave the router on for too long, it may cause the router to overheat. You can try Turn off the router, let it sit for a while, and then plug it back in. The problem may be solved.
2. Method to turn off wireless on Mac. When your Mac computer cannot connect to the wireless network or cannot find the wireless network, you can try to turn off wireless in the system and then turn it on again.
3. Click WiFi, find the WiFi you are currently connected to and cannot access the Internet, click the minus sign, then click OK, delete it and reconnect. You will find that after re-entering your password, you can access the Internet.
4. Restart the router. If all else fails, please try restarting your router. Sometimes some computers cannot connect to the wireless network properly due to the router. For ordinary home routers, you can directly unplug the power supply and plug it in again to complete the restart process.
1. The distance between the WiFi router and the computer is too far or there are other physical obstacles that block the line of sight and the signal is unstable. You can try a closer connection or change the wifi card. There is a problem with the computer system or network settings. You can update the system, reset network settings, or reinstall the network card driver.
2. Method to turn off wireless on Mac. When your Mac computer cannot connect to the wireless network or cannot find the wireless network, you can try to turn off wireless in the system and then turn it on again.
3. Click "Wireless Settings" on the left, change the "Mode" on the right to "11n only", click "Save", and finally click "Safe Exit" in the upper right corner to solve the problem of mac book air The problem of "Unable to join the wifi network, please try to get closer to the wireless router" when connecting to the network.
4. You can try to reset the network, or restart the router and laptop. Firewall issues: If you have firewall software installed on your laptop, then it may prevent you from connecting to WiFi networks. You can try turning off the firewall software or adding the WiFi network to the whitelist.
5. Can’t connect to wifi on mac? Solution for Apple notebook not connecting to wifi: Open Finder on Mac; click the "File" menu and select "New Finder Window", as shown in the figure. Click your Mac's sidebar icon in the device list.
1. The solutions to Mac cannot connect to WiFi are: Restart the router and leave it on for too long, which may cause the router to overheat. You can try to turn off the router, let it sit for a while, and then turn on the power of the router again. The problem may be solved.
2. The distance between the wifi router and the computer is too far or there are other physical obstacles that block the line of sight and the signal is unstable. You can try a closer connection or change the wifi card. There is a problem with the computer system or network settings. You can update the system, reset network settings, or reinstall the network card driver.
3. Restart the wireless router and optical modem. After a long period of operation, the optical modem and wireless router may be unable to obtain the correct IP due to problems such as heat and IP allocation errors. As a result, the mac cannot access the Internet even when connected to the network. Case.
4. Click WiFi, find the WiFi you are currently connected to and cannot access the Internet, click the minus sign, then click OK, delete it and reconnect. You will find that after re-entering your password, you can access the Internet.
Conclusion: The above is all the content about the Apple Mac that cannot be connected to the router that this site has compiled for you. Thank you for taking the time to read the content of this site. I hope it will be useful to you. Help, don’t forget to search for more related content on this site.
The above is the detailed content of Can't set Apple Mac as a router?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
