Late but arrived! PHP8 review is here~

藏色散人
Release: 2023-02-17 11:38:02
forward
8019 people have browsed it

PHP 8 alpha 1 was released on June 25th, and php 8 alpha 2 was released on July 9th. Generally, alpha 2 is a slightly usable version, so I evaluated it over the weekend. What is the php8 JIT?

Let’s take a look at the results first:

When JIT is not turned on

php -d opcache.jit_buffer_size=0 Zend/bench.php simple 0.025simplecall 0.012simpleucall 0.012simpleudcall 0.012mandel 0.135mandel2 0.211ackermann(7) 0.082ary(50000) 0.012ary2(50000) 0.010ary3(2000) 0.186fibo(30) 0.283hash1(50000) 0.039hash2(500) 0.041heapsort(20000) 0.089matrix(20) 0.110nestedloop(12) 0.096sieve(30) 0.045strcat(200000) 0.019------------------------ Total 1.419
Copy after login

When JIT is turned on:

php -d -d opcache.jit_buffer_size=64M -d opcache.jit=1205 Zend/bench.php simple 0.001simplecall 0.000simpleucall 0.000simpleudcall 0.000mandel 0.005mandel2 0.006ackermann(7) 0.010ary(50000) 0.005ary2(50000) 0.004ary3(2000) 0.011fibo(30) 0.027hash1(50000) 0.027hash2(500) 0.018heapsort(20000) 0.011matrix(20) 0.011nestedloop(12) 0.006sieve(30) 0.004strcat(200000) 0.009------------------------ Total 0.155
Copy after login

There are also cases where Opcache is not turned on Next:

php Zend/bench.php simple 0.051simplecall 0.017simpleucall 0.083simpleudcall 0.089mandel 0.506mandel2 0.409ackermann(7) 0.095ary(50000) 0.012ary2(50000) 0.010ary3(2000) 0.187fibo(30) 0.367hash1(50000) 0.040hash2(500) 0.041heapsort(20000) 0.097matrix(20) 0.122nestedloop(12) 0.093sieve(30) 0.063strcat(200000) 0.018------------------------ Total 2.299
Copy after login

Do not enable Opcache: 2.299s When Opcache is enabled but JIT is not enabled: 1.419s When Opcache is turned on and JIT is turned on: 0.155s

With JIT turned on, it is close to 9.15 times that without JIT turned on. After multiple tests, this value is stable between 8 times and 10 times.

How does MPF perform?

In order to be close to our business, we test under the mpf framework

Environment

aliyun centos 6.9

php7.test.com php-fpm one process php8.test.com php-fpm one process

Mpf two interfaces

/v1/hello/wzh/index1

public function index1() { $this->output('123'); }
Copy after login

/v1/hello/wzh/index2

public function index2() { $a = 0; for ($i = 0; $i < 1000000; $i++) $a++; $this->output($a); }
Copy after login

Let’s do a stress test

php7 When there is less calculation

wrk -c36 -d 5s -t12 https://php7.test.com/v1/hello/wzh/index1 Running 5s test @ https://php7.test.com/v1/hello/wzh/index1 12 threads and 36 connections Thread Stats Avg Stdev Max +/- Stdev Latency 432.97ms 76.00ms 527.38ms 92.17% Req/Sec 8.38 5.36 20.00 63.85% 396 requests in 5.09s, 121.43KB readRequests/sec: 77.78 Transfer/sec: 23.85KB
Copy after login

php7 When there is too much calculation

wrk -c36 -d 5s -t12 https://php7.test.com/v1/hello/wzh/index2 Running 5s test @ https://php7.test.com/v1/hello/wzh/index2 12 threads and 36 connections Thread Stats Avg Stdev Max +/- Stdev Latency 1.02s 569.99ms 1.96s 57.14% Req/Sec 3.18 3.43 10.00 80.88% 70 requests in 5.03s, 21.60KB read Socket errors: connect 0, read 0, write 0, timeout 42 Requests/sec: 13.91 Transfer/sec: 4.29KB
Copy after login

php8 When JIT is enabled and when there is less calculation

wrk -c36 -d 5s -t12 https://php8.test.com/v1/hello/wzh/index1 Running 5s test @ https://php8.test.com/v1/hello/wzh/index1 12 threads and 36 connections Thread Stats Avg Stdev Max +/- Stdev Latency 34.48ms 4.34ms 95.45ms 87.87% Req/Sec 84.61 13.36 121.00 85.28% 5083 requests in 5.03s, 1.67MB readRequests/sec: 1010.55 Transfer/sec: 340.43KB
Copy after login

php8 JIT is turned on for many calculations

wrk -c36 -d 5s -t12 https://php8.test.com/v1/hello/wzh/index2 Running 5s test @ https://php8.test.com/v1/hello/wzh/index2 12 threads and 36 connections Thread Stats Avg Stdev Max +/- Stdev Latency 97.84ms 4.97ms 159.50ms 92.12% Req/Sec 30.27 4.42 50.00 86.50% 1814 requests in 5.07s, 614.71KB readRequests/sec: 357.76 Transfer/sec: 121.23KB
Copy after login

php8 JIT is turned off for less calculations

wrk -c36 -d 5s -t12 https://php8.test.com/v1/hello/wzh/index1 Running 5s test @ https://php8.test.com/v1/hello/wzh/index1 12 threads and 36 connections Thread Stats Avg Stdev Max +/- Stdev Latency 38.10ms 6.47ms 239.60ms 94.01% Req/Sec 77.50 12.76 110.00 89.63% 4622 requests in 5.04s, 1.52MB readRequests/sec: 916.22 Transfer/sec: 308.65KB
Copy after login

php8 JIT is turned off for many calculations

wrk -c36 -d 5s -t12 https://php8.test.com/v1/hello/wzh/index2 Running 5s test @ https://php8.test.com/v1/hello/wzh/index2 12 threads and 36 connections Thread Stats Avg Stdev Max +/- Stdev Latency 766.16ms 181.30ms 887.08ms 88.37% Req/Sec 6.25 5.36 20.00 91.36% 215 requests in 5.09s, 72.86KB readRequests/sec: 42.22 Transfer/sec: 14.31KB
Copy after login

[image:BA1A37D8-760E-4637-901B -3E3521F969E7-4107-0000191504DD1B2E/86D37899-3B46-4BDA-B396-E5C8DD51068E.png]

Late but arrived! PHP8 review is here~
##It was found that php8JIT has the best performance of php7 when there is less calculation.

13times, and the more calculations, the more obvious the optimization. When there are many calculations, php8JIT is25.7times the performance of php7.

But there is one problem that I think is amazing. PHP8 has been optimized a lot without JIT and has less calculations. I thought it was a problem with the test direction, but after many demonstrations, this data is accurate. I have time to think about it. Find out what the optimization points are here.

Compilation process

Tucao: Manual compilation of PHP is getting more and more troublesome. It took 2 hours to compile and stepped on N pitfalls. In order to let everyone write more requirements, I put Share the pit

Environment

aliyun centos 6.9, our company generally uses this version.

php source code compilation

wget https://downloads.php.net/~carusogabriel/php-8.0.0alpha2.tar.gz tar -zxf php-8.0.0alpha2.tar.gzcd php-8.0.0alpha2 ./configure --prefix=/yourdir/php8 --with-config-file-path=/yourdir/php8/etc --enable-mysqlnd --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --enable-fpm --enable-static --enable-sockets --with-zip --enable-calendar --enable-bcmath --enable-mbstring --with-zlib --with-iconv=/usr/local/libiconv --enable-gd --enable-mbstring --with-freetype --with-mysql-sock=/tmp/mysql.sock --disable-ipv6 --enable-debug --with-openssl --enable-opcache复制代码
Copy after login

Generally, the makefile generation fails here. There are examples of failed generation later. After the generation is successful,

make -j 8 make install cp php.ini-production /yourdir/php8/etc/php.ini
Copy after login
Configure php.ini

Remember to write down the old configuration of opcache.ini. In the final analysis, JIT is still an optimization of Opcache.

zend_extension=opcache.so opcache.enable=1 ; 命令行测试的话这里一定要打开 opcache.enable_cli=1 opcache.memory_consumption=512 opcache.interned_strings_buffer=8 opcache.max_accelerated_files=10000 opcache.validate_timestamps=1 opcache.revalidate_freq=300 opcache.fast_shutdown=1 opcache.enable_file_override = 1 opcache.blacklist_filename = /etc/php.d/opcache.blacklist ; 这里就是新的jit的配置 opcache.jit=1205 opcache.jit_buffer_size=64M
Copy after login
Configure failure solution

Here are some problems with ./configure failure

Problem 1
No package 'sqlite3' found
Copy after login
Solution

wget https://www.sqlite.org/2020/sqlite-autoconf-3320300.tar.gz tar -zxf sqlite-autoconf-3320300.tar.gzcd sqlite-autoconf-3320300 ./configure --prefix=/usr/local/lib/sqlite-3.32.0 make CFLAGS="-g -O2 -DSQLITE_ENABLE_COLUMN_METADATA"make installexport PKG_CONFIG_PATH="$PKG_CONFIG_PATH:/usr/local/lib/sqlite-3.32.0/lib/pkgconfig"复制代码
Copy after login
Note

This is not possible because the version in the yum warehouse is too low.

yum install sqlite-devel
Copy after login
Problem 2

configure: error: Please reinstall the iconv library.
Copy after login

Solution

wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.14.tar.gz tar -zxf libiconv-1.14.tar.gzcd libiconv-1.14 ./configure make make install
Copy after login
Problem 3

No package 'oniguruma' found
Copy after login

Similarly, yum also does not work, the version is too low.

yum install oniguruma-devel
Copy after login
Solution

wget https://github.com/kkos/oniguruma/archive/v6.9.5_rev1.tar.gz tar -zxf v6.9.5_rev1.tar.gzcd oniguruma-6.9.5_rev1/ autoreconf -vfi ./configure --prefix=/usr/local/lib/oniguruma-6.9.5 make make installexport PKG_CONFIG_PATH="$PKG_CONFIG_PATH:/usr/local/lib/oniguruma-6.9.5/lib/pkgconfig"
Copy after login
Problem Four

No package 'libzip' found
Copy after login

Solution

wget https://libzip.org/download/libzip-1.7.2.tar.gz tar -zxf libzip-1.7.2.tar.gzcd libzip-1.7.2 cmake3 -DCMAKE_INSTALL_PREFIX=/usr/local/lib/libzip-1.7.2 make make installexport PKG_CONFIG_PATH="$PKG_CONFIG_PATH:/usr/local/lib/libzip-1.7.2/lib/pkgconfig"复制代码
Copy after login
Enjoy php 8 & JIT !


The above is the detailed content of Late but arrived! PHP8 review is here~. For more information, please follow other related articles on the PHP Chinese website!

Related labels:
source:juejin.im
Statement of this Website
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn
Latest Downloads
More>
Web Effects
Website Source Code
Website Materials
Front End Template
About us Disclaimer Sitemap
php.cn:Public welfare online PHP training,Help PHP learners grow quickly!