Apache2 httpd.conf Chinese version
#
# Configuration file based on NCSA service.
#
#This is the main configuration file of the Apache server.
#It contains the server's configuration directives that affect server operation.
#See
#
#Don’t just read the information about these directives Not to understand it.
#Here are simple instructions, if you do not refer to the online documentation, you will be warned.
#
#These configuration instructions are divided into the following three parts:
#1. The part that controls the behavior of the entire Apache server (i.e. global environment variables)
#2. Define the main or default service parameters The command also provides default setting parameters for all virtual hosts
#3. Virtual host setting parameters
#
#Configuration and log file name: If the file name you specify starts with "/" ( "dirver:/" under win32),
#The server will use the absolute path. If the file name does not start with "/", then it will append the value of ServerRoot
# in front of the file name, for example , for "logs/foo.log", if the value of ServerRoot
# is "/usr/local/apache2", then the file should be "/usr/local/apache2/logs/foo.log"
#
##First area: Global environment parameters
#
#The parameters set here will affect the behavior of the entire Apache server;
#For example, the number of concurrent requests that Apache can handle, etc.
#
#ServerRoot: Indicates the root directory where the server saves its configuration, errors, log files, etc.
#
#Attention! If you want to specify it as a location on NFS or other network,
# please be sure to read the documentation related to LockFile (probably at
#
#This will enable you to solve many problems yourself.
#
#Do not add a slash at the end of the path.
#
ServerRoot "/usr/loacl/apache2"
#
#The lock file for serial access must be saved on the local disk
#
#LockFile logs/accept.lock
#ScoreBoardFile: used to save File for internal service process information.
# If not specified (default), the scoreboard will be stored in an anonymous shared memory segment,
# and it cannot be used by third-party software.
#If specified, ensure that two Apaches cannot use the same scoreboard file.
#This scoreboard file must be saved on the local disk.
#
#ScoreBoardFile logs/apache_runtime_status
#
#PidFile: A file that records the server startup process ID.
#
PidFile logs/httpd.pid
#
#Timeout: timeout before receiving and sending Number of seconds
#
Timeout 300
#
#KeepAlive: Whether to allow stable connections (multiple requests per connection),
#Set to "Off" to stop use.
#
KeepAlive On
#
#MaxKeepAliveRequests: The maximum number of requests allowed during a stable connection,
# Set to 0 to indicate unlimited access.
#We recommend that you set it to a larger value to improve performance
MaxKeepAliveRequests 100
#
#KeepAliveTimeout: Receive requests from the same client on the same connection Number of seconds
#
KeepAliveTimeout 15
##
##Server-Pool size setting (for MPM)
##
# prefork MPM
# StartServers: The number of processes started by the server at startup
# MinSpareServers: The minimum number of backup processes maintained
# MaxSpareServers: The maximum number of backup processes maintained
# MaxClients: The maximum number of backup processes allowed to be started by the server Number of processes
# MaxRequestsPerChild: The maximum number of requests allowed by a service process
StartServers 5
MinSpareServers 5
MaxSpareServers 10
MaxClients 150
MaxRequestPerChild 0
# worker MPM
# StartServers: The number of service processes when the server starts
# MaxClients: The maximum number of users allowed to connect at the same time
# MinSpareThreads: Minimum number of worker threads maintained
# MaxSpareThreads: Maximum number of worker threads allowed to be maintained
# ThreadsPerChild: Work thread constant in each service process
# MaxRequestsPerChild: Maximum number of requests allowed in the service process
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
# perchild MPM
# NumServers: Number of service processes
# StartThreads: Number of starting threads in each service process
# MinSpareThreads: Minimum number of threads maintained
# MaxSpareThreads: Maximum number of threads maintained Number of threads
# MaxThreadsPerChild: The maximum number of threads allowed for each service process
# MaxRequestsPerChild: The maximum number of connections allowed for each service process
NumServers 5
StartThreads 5
MINSPARETHREADS 5
MaxsparethReads 10
MaxthreadsperChild 20
MaxrequestSperchild 0
& LT;/iFmodule & GT;
#wi nnt mpm #ThreadsperChild: Working thread during the service process Constants
# MaxRequestsPerChild: The maximum number of requests allowed by the service process
ThreadsPerChild 250
MaxRequestsPerChild 0
# BeOS MPM
# StartThreads: The number of threads started when the server starts
# MaxClients: The maximum number of threads that can be started (one thread equals one user)
# MaxRequestsPerThread: The maximum number of requests allowed per thread
StartThreads 10
MaxClients 50
MaxRequestsPerThread 10000
# NetWare MPM
# ThreadStachSize: for each worker thread Allocated stack size
# StartThreads: Number of threads started when the server starts
# MinSpareThreads: Number of idle threads used to process real requests
# MaxSpareThreads: Maximum number of idle threads
# MaxThreads: The maximum number of threads active at the same time
# MaxRequestPerChild: The maximum number of service requests for one thread,
# It is recommended to set it to 0 to achieve unlimited access
ThreadStackSize 65536
StartThreads 250
MinSpareThreads 25
MaxSpareThreads 250
MaxThreads 1000
MaxRequestPerChild 0
# OS/2 MPM
# StartServers: Number of started service processes
# MinSpareThreads: Minimum idle threads allowed for each process
# MaxSpareThreads: Maximum idle threads allowed for each process
# MaxRequestsPerChild: Allowed for each service process Maximum number of connections
StartServers 2
MinSpareThreads 5
MaxSpareThreads 10
MaxRequestsPerChild 0
#
# Listen: Allows you to bind the Apache service to the specified IP address and port to replace the default value
# See the
# Use the following command to make Apache only listen on the specified IP address ,
# to prevent it from listening on IP address 0.0.0.0 Shared Support (DSO)
#
# In order to be able to use functions from modules compiled in DSO mode, you must have the corresponding "LoadModule" line,
# Therefore, these instructions are included here, so that it can be activated before using it.
# Those statically compiled modules do not need to be listed here (i.e. modules listed with "httpd -l")
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
#
# ExtendedStatus: When calling "server-status", controls whether Apache generates "full" status
# information (ExtendedStatus On) or basic information (ExtendedStatus Off) ).
# Default is off
#
# ExtendedStatus On
### Second area: "main" service configuration
#
# This area is created by "main" ” directive value used by the server to respond to any requests that are not handled by the
# definition.
# These values also provide default values for the
# If there is a definition in
#
#
#
# If you want httpd to run as another user or group , you must start as root
# and then switch it to the user or group you want to use.
#
# User/Group: User and group running httpd
# Use "User nouser" and "Group nogroup" on SCO (ODT3)
# On HPUX, you may not be able to use To use shared memory as nobody, it is recommended to create a www user.
# Note that some kernels reject setgid(Group) or semctl(IPC_SET) when the group ID is greater than 60000.
# Do not use "Group #-1" on these systems.
#
User nobody
Group #-1
#
# ServerAdmin: Your email address, Apache will send you an email when a problem occurs.
# As an error document, this address is displayed on the server-generated page,
# For example: admin@your-domain.com
#
ServerAdmin kreny@sina.com
#
# ServerName specifies the name and port number that Apache uses to identify itself.
# Normally this value is assigned automatically, but we recommend that you specify it explicitly to prevent startup errors
#
# If you specify an invalid DNS name for your host, server- generated redirects will not work.
# See the UseCanonicalName directive
#
# If your host does not have a registered DNS name, type its IP address here
# Regardless, you must use its IP address to provide services,
# Here is an easy-to-understand way to redirect the service
ServerName www.dalouis.com:80
#
# UseCanonicalName: Directive that determines how Apache constructs URLS and SERVER_NAME and SERVER_PORT.
# When set to "Off", Apache will use the host name and port number provided by the client.
# When set to "On", Apache will use the value of the ServerName directive.
#
UseCanonicalName Off
#
# DocumentRoot: The root directory of your document. By default, all requests are answered from this directory.
# But you can use symbolic links and aliases to point to other locations.
#
DocumentRoot "/home/redhat/public_html"
#
# Access permissions can be configured for each directory that Apache can access (including its subdirectories).
#
# First, we configure a high-limit feature.
# This will disable access to the directory where the file system is located and add the directory block you wish to allow access to.
# As shown below
Order Deny,Allow
Deny from all
#
# Note from From here you must explicitly allow which specific features can be used.
# - So, if Apache is not working as you expect,
# please check that you explicitly specify that it is available below.
#
#
# This will change to the DocumentRoot you set
#
#
# Options: The value of this directive can be "None", "All", or any combination of the following options:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note, "MultiViews" Must be specified explicitly, "Options All" does not provide you with this feature.
#
# This directive is complex and important, please see
# "http://httpd.apache.org/docs-2.0/mod/core.html#optioins" for more information .
#
Options FollowSymLinks
#
# AllowOverride controls directives placed in .htaccess files.
# It can be "All", "None", or a combination of the following directives:
# Options FileInfo AuthConfig Limit
#
AllowOverride None
#
# Control Who can access services.
#
Order allow,deny
Allow from all
#
# UserDir: Specifies that when a ~user request is received, The directory name will be added to the user's home directory.
#
UserDir public_html
# In order to prevent vulnerabilities in the UserDir command, it is very useful to set a UserDir like "./" for the root user.
# If you are using Apache 1.3 or above, we strongly recommend that you
# include the following line in your server configuration file
UserDir disabled root
#
# The following is an example of using the UserDir directive to make a site's directory read-only:
#
#
# AllowOverride FileInfo AuthConfig Limit Indexes
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludeNoExec
#
# Order allow,deny
# Allow from all
#
#
# Order deny,allow
# Deny from all
#
#
#
# DirectoryIndex: When the definition request is a directory, the file name that Apache provides to the user is
#
# The index.html.var file (a type image file) is used to provide a document processing list,
# for For the same purpose, you can also use the MultiViews option, but it will be very slow.
#
DirectoryIndex index.php index.html index.html.var
#
# AccessFileName: Query in each directory the file name of the file that provides additional configuration instructions for the directory.
# See the AllowOverride directive.
#
AccessFileName .htaccess
#
# The following lines prevent .htaccess and .htpasswd files from being viewed by web clients.
#
Order allow,deny
Deny from all
#
# Typeconfig: Defines where to query mime.types files.
#
TypeConfig conf/mime.types
#
# DefaultType: Defines the default MIME type provided by the server when the MIME type cannot be determined.
# If your service mainly contains text or HTML documents, "text/plain" is a good choice;
# If it mostly contains binary documents, such as software or images, you should use
# "application" /octer-stream" to prevent the browser from displaying binary files as text.
#
DefaultType text/plain
#
# mod_mime_magic allows the server to use different hints (hints) from files that define their own types.
# This MIMEMagicFile directive defines hints The file where the definition resides.
#
MIMEMagicFile conf/magic
#
# HostnameLookups: Specify to record the client’s name or IP address , for example, when this directive is on,
# records the host name, such as www.apache.org; when it is off, records the IP address, 204.62.129.132.
# The default value is off, which is much better than setting it to on, because if set to on, each client request will
# cause at least one query to the nameserver.
#
HostnameLookups Off
#
# EnableMMAP: Control whether to perform memory dump (if supported by the operating system).
# The default is on, if your server is installed on a network file system (NFS), please turn it off.
# On some systems, turning it off will improve system performance (regardless of the file system type);
# For details, please refer to http://httpd.apache.org/docs-2.0/mod/core.html #enablemmap
#
# EnableMMAP off
#
# EnableSendfile: Control whether to use sendfile kernel to support sending files
# (if the operating system supports it). The default is on. If your server is installed on the Network File System
# (NFS), please turn it off.
# See http://httpd.apache.org/docs-2.0/mod/core.html#enablesendfile
#
# EnableSendfile off
#
# ErrorLog: Error Log file location.
# If you do not define the ErrorLog directive in
# will be recorded here. If you define ErrorLog there, these error messages will be logged in the file you
# define, not the file defined here.
#
ErrorLog logs/error_log
#
# LogLevel: Control the amount of log information recorded in the error log file.
# Possible values include: debug, info, notice, warn, error, crit, alert, emerg.
#
LogLevel warn
#
# The following command defines the format alias for the CustomLog command.
#
LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" combined
LogFormat " %h %l %u %t "%r" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# You need to install the mod_logio.c module to use %I and %O.
# LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i" %I %O" combineddio
#
# Specify the location and format of the access log file (general log format).
# If you do not define this directive in
# If you define this directive, it will be recorded in the location you specify, not the location defined here.
#
CustomLog logs/access_log common
#
# If you want to record agent and referer information, you can use the following command
#
# CustomLog logs/referer_log referer
# CustomLog logs/agent_log agent
#
# If you want to use a file to record access, agent and referer information,
# you can define this command as follows:
#
# CustomLog logs/access_log combined
#
# ServerTokens
# This directive defines the type of information included in the HTTP response header. The default is "Full",
# This means that the operating system type and compilation information in the module will be included in the response header.
# can be set to one of the values in the column:
# Full | OS | Minor | Minimal | Major | Prod
# Full conveys the most information, and Prod the least.
#
ServerTokens Full
#
# Feel free to add a line of information including the server version and virtual host name to the server-generated output page
# (internal error document, FTP directory Lists, mod_status and mod_info output, etc., except CGI errors
# or custom error documentation).
# Set to "EMail" will contain a mailto: connection pointing to ServerAdmin.
# can be the following values: On | Off | EMail
#
ServerSignature On
#
# Aliases: Add the alias you need at this time, the format is as follows:
# Alias Alias Real Name
#
# Note that if you include "/" at the end of the alias, you also need to include "/" in the URL.
# Therefore, "/icons" is not an alias in this example.
# If the alias ends with "/", then the real name must also end with "/".
# If the ending "/" is omitted from the alias, then the real name must also be omitted.
#
# We use the alias "/icons/" to represent the FancyIndexed directory list. If you don't use,
# FancyIndexing, you can comment it out.
#
# Alias /icons/ "/usr/local/apache2/icons/"
#
# Options Indexes MultiViews
# AllowOverride None
# Order allow,deny
## Allow from all
#
#
# This will change ServerRoot/manual . This alias provides the location of the man page,
# even if you change your DocumentRoot. If you don't care about having a man page,
# you can comment it out.
#
Alias /manual "/usr/loacl/apache2/manual"
Options Indexes FollowSymLinks MultiViews IncludesNoExec
AddOutputFilter Includes html
Order allow,deny
Allow from all
#
# ScriptAlias: Specify the directory containing the service script.
# ScriptAliases are essentially the same as Aliases, except that the document here is processed as a program when requested.
# The trailing "/" rules are the same as Alias
#
ScriptAlias /cgi-bin/ "/usr/loacl/apache2/cgi-bin/"
# Here is adding php 4 supported commands
AddType application/x-httpd-php .php
LoadModule php4_module modules/libphp4.so
#
# Add mod_cgid .c setting, mod_cgid provides
# script interface path for UNIX sockets that use cgid for communication.
#
# Scriptsock logs/cgisock
#
# Change "/usr/local/apache2/cgi-bin" to your ScriptAliased specification CGI directory,
# if you configured it.
#
AllowOverride None
Options None
Order allow,deny
Allow from all
#
# Redirect allows you to tell the client to use the document that exists in the server namespace,
# instead of the current one. This helps the client locate those that have changed location. document.
# For example:
# Redirect permanent /foo http://www.example.com/bar
#
# Command to control the display of server-generated directory list
#
#
# IndexOptions: Controls server-generated directory list display characteristics.
#
IndexOptions FancyIndexing VersionSort
#
# The AddIcon* command tells the server how to display image files with different extensions.
# is only applicable to the FancyIndexed command
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f .gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
#
# DefaultIcon for icons that are not explicitly defined The file provided handles
#
DefaultIcon /icons/unknown.gif
#
# AddDescription allows you to place a short description after the server-generated index.
# Only valid for FancyIndexed directive.
# Format: AddDescription "Description" File name
#
# AddDescription "GZIP compressed document" .gz
# AddDescription "tar archive" .tar
# AddDescription "GZIP compressed tar archive" .tgz
#
# ReadmeName specifies the name of the README file that the server searches for by default and adds it to the directory list
#
# HeaderName specifies the file name of the prefix file in the directory list
ReadmeName README.html
HeaderName HEADER.html
#
# IndexIgnore specifies a set of file names that the directory index ignores and is not included in the list.
# supports shell-type wildcards.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
#
# AddEncoding allows you to use (Mosaic/ X 2.1+) decompress information,
# Note: not all browsers support this option.
# Although the names are similar, the following commands are different from the FancyIndexing custom command above.
#
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
#
# DefaultLanguage and AddLanguage allow you to specify the language of the document.
# This allows you to let users navigate the document in easy-to-understand language.
#
# Specifies the default language, which means that all packages that do not specify a language will use this language.
# In most cases, you may not want to set this unless you are sure that it is the right thing to do.
# Usually, it is better not to use certain language than to use the wrong language.
#
# DefaultLanguage nl
#
# Note 1: The affixes used as language keywords are undoubtedly not the same - documents in Polish
# (Internet Standard Language Code Yes pl) will want to use "AddLanguage pl .po"
# to avoid ambiguity with the general affixes of perl scripts.
#
# Note 2: The following examples illustrate examples where the two-character abbreviation of a language is different from the two-character abbreviation of its country
#, such as “Danmark/dk” and “Danmark/ da" comparison.
#
# Note 3: In the case of "ltz" we use a three-character affix, which violates the provisions of RFC.
# It will be fixed during operation and the RFC1766 standard will be used for reference. data.
#
# Danish (da) - Dutch (nl) - English (en) - Estonian (et)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Norwegian (no) - Norwegian Nynorsk (nn) - Korean (ko)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru) - Croatian (hr)
#
AddLanguage da .dk
addlanguage en .en
addlanguage et .et
addlanguage fr .fr
addlanguage de .de
addlanguage he .he
AD> dlanguage el .el
AddLanguage it .it
AddLanguage ja .ja
AddLanguage pl .po
AddLanguage ko .ko
AddLanguage pt .pt
AddLanguage nn .nn
AddLanguage no . no
AddLanguage pt-br .pt-br
AddLanguage ltz .ltz
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .sv
AddLanguage cz .cz
AddLanguage ru .ru
AddLanguage tw .tw
AddLanguage zh-tw .tw
AddLanguage hr .hr
# LanguagePriority allows you to give priority to some languages during the conversation.
#
# List them in descending order of priority. We arrange them in more or less alphabetical order
# . Maybe you want to change the order.
LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca es sv tw
#
# ForceLanguagePriority allows you to select MULTIPLE CHOICES(Prefer)[in the case of communication Next]
# or NOT ACCEPTABLE(Fallback) [when there is no acceptable language match] Provide a results page.
#
ForceLanguagePriority Prefer Fallback
#
# It is always a good idea to specify a default character set for all pages sent out, and for your
# web site Internationalization opens the door to what you've always wanted.Likewise, specifying the
# default character set has some minor detriments to a page that uses the iso-8859-1 (latin1) standard command
# unless otherwise specified e.g. you just explicitly Declare it.
# There are also some browser security reasons related to javascript and URL syntax that always encourages you to use the default charset
# .
#
#AddDefaultCharset ISO-8859-1
AddDefaultCharse GB2312
#
# Character sets are generally used in the form of file extensions. Maybe you want to avoid
# collisions with language extensions unless you do a good job of testing after every change.
# See http://www.iana.org/assignments/character-sets for a list of character set
# names and their respective RFCs.
#
AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 . latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb
AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk
AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb
AddCharset ISO-8859-9 .iso8859- 9 .latin9 .trk
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5 .Big5 .big5
# For Russian, multiple character sets are used (how to use mainly depends on the client):
AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO- 10646-UCS-4 .ucs4
AddCharset UTF-8 .utf8
# The following character sets are not mapped to a specific standard (iso), but they are supported in browsers
# is widely supported. Notice those capital letters.
# (It shouldn't, but it is done for compatibility with some browsers)
#
# See http://www.iana.org/assianments/character-sets for
# list of them. But browser support is less.
#
AddCharset GB2312 .gb2312 .gb
AddCharset utf-7 .utf7
AddCharset utf-8 .utf8
AddCharset big5 .big5 .b5
AddCharset EUC-TW .euc- tw
AddCharset EUC-JP .euc-jp
AddCharset EUC-KR .euc-kr
AddCharset shift_jis .sjis
#
# AddType allows you to add Or override the MIME configured in the mime.types file
#
AddType application/x-tar .tgz
AddType image/x-icon .ico
#
# AddHandler allows you Map certain file extensions to "handlers":
# File type independent behavior. This can either be compiled into the server or added to the Action directive
# (see below).
# To use CGI scripts other than those specified by the ScriptAliased directive:
# (To make it available, you also need to add "ExecCGI" to Options.
#
# AddHandler cgi-script .cgi
#
# For files that contain their own HTTP headers
#
# AddHandler send-as-is asis
#
# For server- parsed imagemap file:
#
# AddHandler imap-file map
#
# agemap file:
#
#AddHandler imap-file map
#
# For type image transfer resources)
# (This is the default setting to allow Apache's "It Worked" page to be distributed in multiple languages).
#
AddHandler type-map var
#
# Filters allow you to process it before sending it to the client.
#
# In order to analyze the .shtml document containing (SSI) on the server side:
# (To execute this command, you also need to add "Includes" to the Options command.)
#
# AddType text/html .shtml
# AddOutputFilter INCLUDES .shtml
#
# Action lets you define a script that will be executed when a matching media file is called. This will reduce
# duplicate entry of URL pathnames for frequently used CGI scripts.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#
#
# Configurable There are three styles of error responses:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
# ErrorDocument 500 "The server made a boo boo."
# ErrorDocument 404 /missing.html
# ErrorDocument 404 "/cgi-bin/missing_handler.pl"
# ErrorDocument 402 http://www.example.com/subscription_info.html
#
#
# By combining these instructions, we can create an internationalized error response.
#
# We use Alias to redirect any /error/HTTP_
# our collection of multilingual error messages. Replace it with the correct text.
#
# By adding the following lines, you can change the display of these messages without having to change the
# HTTP_
#
# Alias /error/include/ "/your/include/path/"
#
# to copy the files under /usr/local/apache2/error/include/ to /
# Starting under your/inclue/path/, you can create your own collection of files, even for each virtual host.
# Regardless of how your ServerSignature is set, the default include file will display your
# Aapche version number and your ServerAdmin email address
#
# Internationalized error documentation requires mod_alias, mod_include and mod_negotiation three
# modules. To activate them, uncomment the following 30 lines
# Alias /error/ "/usr/local/apache2/error/"
#
#
# AllowOverride None
# Options IncludesNoExec
# AddOutputFilter Includes html
# AddHandler type-map var
# Order allow,deny
# Allow from all
# LanguagePriority en de es fr it nl sv
# ForceLanguagePriority Prefer Fallback
#
#
# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
# Error Document 401 /error/HTTP_UNAUTHORIZED.html.var
ErrorDocument 403 /error.php
# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
# ErrorDocument 410 /error/HTTP_GONE.html.var
# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
# ErrorDocument 412 /error/HTTP_PRECONTION_FA ILED.html .var
# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
# ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE .html.var
# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
#
# The following command changes the standard HTTP response behavior to handle known browser issues.
#
Browsermatch "msie 4.0b2;" nokeepalive downloadrade -0 force-response -0
Browsermatch "re" re Alplayer 4.0 "Force-Response -.0
Browsermatch "Java/1.0" force-response-1.0
BrowserMatch "JDK/1.0" force-response-1.0
#
# The following command turns off non-GET for directories without trailing "/" Redirection of requests,
# These commands fix the problem that Microsoft's DAV method cannot correctly handle redirected WEB folders.
# The DAV file system under Apple and VFS under Gnome also support DAV in this way
#.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully
#
# allows you to use the URL: http://servername/server-status to generate and report server status information via mod_status. Change .example.com to your own domain name.
#
#
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .example.com
#
#
# Allows remote reporting of server configuration information using URL: http://servername/server-info
# (requires mod_info.c support). Change ".example.com" to your own domain name.
#
#
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .example.com
#
#
# Proxy server command, remove the following to enable proxy service.
#
#
# ProxyRequests On
#
# Order deny,allow
# Deny from all
# Allow from .example.com
#
#
# Install or turn off HTTP/1.1 "channel" header processing.
# ("Full" adds server version information, "Block" removes all output "channel" header information.
# Can be set to one of the following options: Off | On | Full | Block
#
# ProxyVia On
# It is best to install a cache for the proxy service and remove the comment symbols in the following lines:
# (no buffering without CacheRoot)
#
# CacheRoot "/usr/local/apache2/proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 01
# CacheDefaultExpire 1
# NoCache a-domain.com another-domain.edu joes.garage-sale.com
#
# End of proxy command
#
# Additional specific module configuration. 🎜>#
Include conf/ssl.conf
## Third Area: Virtual Host
#
# VirtualHost: You can set up a virtual host container to maintain multiple
# domain names/hostnames on your host. Most configuration information only uses name-based virtual hosts, so the server
# doesn't have to worry about it. For IP address issues, the following command replaces the virtual host name with an *
#
# Before you try to configure your virtual host, please see
# URL: http://httpd.apache. .org/docs-2.0/vhosts/> for more information.
#
# You can use the command line option "-S" to verify your virtual host configuration. #
# Use name-based virtual host
#
# NameVirtualHost *
#
# Virtual host example:
# Almost all Apache commands can be used in virtual hosts. Used in the host container.
# The first virtual host area is configured to respond to requests with unknown service names.
#
#
# ServerAdmin webmaster@. dummy-host.example.com
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com -error_log
# CustomLog logs/dummy-host.example.com-access_log commom
#
http://www.bkjia.com/PHPjc/316911.html
www.bkjia.com
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
