By default, the
default document directory used by apache on Linux is: /var/www
The default port is: 80
If you want to publish a system resource directory of your own, you can use the following method and execute as follows Command:
(1) Add listening port
#cd /etc/apache2
#vim ports.conf
File addition:
NameVirtualHost *:8000
Listen 8000
(2) Configure virtual directory
#cd /etc/apache2/sites-available
#cp default default-me
#vim default-me
The file content is as follows:
Copy code The code is as follows :
8000 >
ServerAdmin webmaster@localhost
DocumentRoot /wwwroot
🎜>Order allow,deny
allow from all
ErrorLog /var/log/apache2/error.log
# Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn
CustomLog /var/log/apache2/access.log combined
Bold parts are key points.
(3) Publish site
# ln -s /etc/apache2/sites-available/default-me /etc/apache2/sites-enabled/001-default
(4) Restart the service
#/etc/init.d/apache2 restart
(5) Test
http://localhost:8000/
If it can be accessed normally, it means the configuration is correct. Copy code
The code is as follows:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
#
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
# Use name-based virtual hosting.
#
NameVirtualHost *:81
NameVirtualHost *:82
NameVirtualHost *:83
NameVirtualHost *:84
NameVirtualHost *:85
NameVirtualHost *:86
#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any block.
#
ServerAdmin jsw7001@hotmail.com
DocumentRoot D:/AppServ/www/www-nongye
ServerName www.dede.com
ErrorLog D:/AppServ/www/www-nongye/errornongye.log
CustomLog logs/dummy-host2.appservnetwork.com-access_log common
Options FollowSymLinks
#Deny from all
Allow from all
ServerAdmin jsw7001@hotmail.com
DocumentRoot D:/AppServ/www-chinaec
ServerName www.dede.com
DirectoryIndex index.php index.html
ErrorLog D:/AppServ/www-chinaec/errornongjiale.log
CustomLog logs/dummy-host2.appservnetwork.com-access_log common
ServerAdmin jsw7001@hotmail.com
DocumentRoot D:/AppServ/www/www-05110
ServerName www.dede.com
ErrorLog D:/AppServ/www/www-05110/errornong05110.log
CustomLog logs/dummy-host2.appservnetwork.com-access_log common
ServerAdmin jsw7001@hotmail.com
DocumentRoot D:/AppServ/www/wordpress
ServerName www.dede.com
ErrorLog D:/AppServ/www/wordpress/errornongwordpress.log
CustomLog logs/dummy-host2.appservnetwork.com-access_log common
ServerAdmin jsw7001@hotmail.com
DocumentRoot D:/AppServ/www/magento
ServerName www.dede.com
ErrorLog D:/AppServ/www/magento/errormagento.log
CustomLog logs/dummy-host2.appservnetwork.com-access_log common
ServerAdmin jsw7001@hotmail.com
DocumentRoot D:/AppServ/www/magento1322
ServerName www.dede.com
ErrorLog D:/AppServ/www/magento1322/errormagento1322.log
CustomLog logs/dummy-host2.appservnetwork.com-access_log common
ServerAdmin jsw7001@hotmail.com
DocumentRoot D:/AppServ/www/www-nongjiale
ServerName www.dede.com
ErrorLog D:/AppServ/www/www-nongjiale/errornongjiale.log
CustomLog logs/dummy-host2.appservnetwork.com-access_log common
ServerAdmin webmaster@dummy-host2.x
DocumentRoot "C:/Apache2.2/docs/dummy-host2.x"
ServerName dummy-host2.x
ErrorLog "logs/dummy-host2.x-error.log"
CustomLog "logs/dummy-host2.x-access.log" common
1、单域名单端口设置
如:www.abc.com 默认用80访问
特别说明,apache的配置默认都在安装目录下的conf目录里面
或者是/etc/apache2
不过一定要注意,listen.conf文件中端口监听是否开启
如下图,表示已经开启80端口监听
直接默认
1、单域名单端口设置
如:www.abc.com 默认用80访问
特别说明,apache的配置默认都在安装目录下的conf目录里面
或者是/etc/apache2
不过一定要注意,listen.conf文件中端口监听是否开启
如下图,表示已经开启80端口监听
直接默认修改default-server.conf
这个配置最好简单
安装好了,之后,默认已经能够使用了,只是要把它修改成你需要的域名及访问路径罢了。
给一个标准配置吧
复制代码 代码如下:
DocumentRoot "/srv/www/htdocs"
#
# Configure the DocumentRoot
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs-2.2/mod/core.html#options
# for more information.
Options None
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
2、单域名多端口设置
复制代码 代码如下:
Options None
AllowOverride None
Order allow,deny
Allow from all
Options None
AllowOverride None
Order allow,deny
Allow from all
NameVirtualHost *:80
NameVirtualHost *:81
DirectoryIndex index.html index.php
ServerName "www.abc.com "
DocumentRoot "/srv/www/htdocs/"
DirectoryIndex index.php
ServerName "www.abc.com:81 "
DocumentRoot "/srv/www/htdocs/bbs/"
3、多域名多端口设置
复制代码 代码如下:
Options None
AllowOverride None
Order allow,deny
Allow from all
Options None
AllowOverride None
Order allow,deny
Allow from all
Options None
AllowOverride None
Order allow,deny
Allow from all
NameVirtualHost *:80
NameVirtualHost *:81
DirectoryIndex index.html index.php
ServerName "www.abc.com "
DocumentRoot "/srv/www/htdocs/"
DirectoryIndex index.html index.php
ServerName "www.btc.com "
DocumentRoot "/srv/www/htdocs/btc"
DirectoryIndex index.php
ServerName "www.abc.com:81 "
DocumentRoot "/srv/www/htdocs/bbs/"
需要注意的问题是,多端口监听,一定要注意listen.conf文件,是否开启了相应端口。
http://www.bkjia.com/PHPjc/327524.htmlwww.bkjia.comtruehttp://www.bkjia.com/PHPjc/327524.htmlTechArticle默认情况下,linux上apache使用的 默认文档目录是:/var/www 默认端口是:80 如果想发布自己的一个系统资源目录,可以使用下面的方法,执行如...