What are the steps to assemble the IKEA Leberg shelves?

Having trouble assembling the IKEA Leberg shelves? PHP editor Xigua will relieve your worries! This detailed graphic tutorial will guide you step by step to easily assemble the Leberg rack, allowing you to enjoy the fun of DIY. Read on below for detailed step-by-step instructions to easily create your own IKEA shelves!

#1. IKEA rack installation process - measurement and hanging wire

The first step is to measure and hang the wire. Choose the most suitable spot on the wall based on your own design or the instructions given by the product. To accurately measure the hanging wire, you need to accurately measure and match the relative height of the installation and the punched area of ​​the storage rack. After selecting the installation site, mark it with a pen; after marking the hanging wire, use a ruler to check whether the vertical line is vertical before use.

2. IKEA shelf installation process - drilling

The second step is to drill holes. Use an electric drill to drill holes at the hole spacing of the marked number. The size of the hole should be slightly larger than the diameter of the nut used to fix it. The wall is the supporting structure of the entire house. When it comes to wall installation, even small wall shelves need to take into account the wall conditions. If the wall is made of porous bricks or foam bricks, it is not recommended to install storage racks; after drilling the holes, fix the expansion screws into the holes, install the storage racks, and tighten them with tightening screws. If you are still not sure about the need for structural reinforcement, you can use the invisible fixing bracket in conjunction with the wall shelf.

Key points for installing IKEA racks

1. Key points for installing IKEA racks—pay attention to usability

Although the wall racks have a decorative effect on the wall, But it should still be based on ease of use. To put it simply, it is necessary to consider the installation environment. For example, the storage rack is assembled in the home kitchen. If it is to place common items such as cooking spices, it should be installed on the wall that can be reached by reaching out around the stove; if it is matched with an integrated shower room, it needs to be able to place daily items. Toiletries are also made of stainless steel. One of the original intentions of installing storage racks is to store and organize small items to save indoor space. Therefore, the installation of wall storage racks also needs to take into consideration the scientific arrangement of walls, such as around bathroom windows and the back of room doors, which are easily overlooked. Any part of the gap can be used flexibly.

2. Key points in the installation of IKEA storage racks - pay attention to the classification layout

The storage racks should be modularized and classified. When we install storage racks to organize things, we do it for easy access, placement and use, not to cause trouble for ourselves. In order to improve work efficiency, you can think clearly about what items you need to place before assembly, and clearly classify these items. During installation, use colors, lines, etc. to distinguish the storage racks into one by one. A small control module, so that we can be "fast, ruthless and accurate" when picking up items.

3. Key points for installing IKEA storage racks—pay attention to convenience

When installing storage racks, all layouts and requirements must be considered, and convenience for cooking must be considered in the kitchen. The assembly part that needs to be used must be a place close to cooking, that is, a place that can be touched by reaching out your hand, and it is not common to install it into the gap part of the kitchen. Storage racks are often used in shower rooms. If your home uses an entire shower room instead of a space, then there is no need to consider using storage racks. When using a spacing integrated shower room, when installing storage racks, you must consider how much items you can store and the direction of use.

4. The key point of installing IKEA shelves - pay attention to the richness

The area of ​​the kitchen and bathroom is relatively small, so the equipment for kitchen hooks must save space and use it reasonably. Orientation in interior space. When installing storage racks in the kitchen, you must consider classifying and placing kitchen supplies. Storage racks are abundant in the market, such as CNC blade racks, drain racks, storage racks for condiments, etc. Install in a valid direction according to their different types. The drain rack can be installed around the sink, the CNC blade rack can be installed on the corner of the stove, and the condiment storage rack can be installed close to where we cook.

5. Key points for installing IKEA racks—installation rules

The installation of wall racks must comply with convenient and effective rules. When installing storage racks, you must consider the overall layout and daily life. For example, when installing wall racks in the kitchen, consider installing the wall racks where they are easily accessible for cooking. The installation of wall shelves must comply with the rules of saving indoor space. The kitchen and bathroom are relatively small places in our home environment, so the installation of kitchen hooks must save space and make reasonable use of our space. The installation of wall racks should be clearly classified. There are many types of wall storage racks. Installing different storage racks in different locations in your home can keep your home in order by "doing your duty".

The above is the detailed content of What are the steps to assemble the IKEA Leberg shelves?. For more information, please follow other related articles on the PHP Chinese website!