The task of installing the operating system can be tricky when you have a newly built computer without a USB flash drive. But, don’t worry, PHP Editor Banana brings you a detailed guide on different ways to install the operating system without a USB flash drive. This article will guide you step-by-step through the process, making it easy to get started whether you are technically proficient or a beginner. Come and read the following content to learn the convenient way to install the operating system without a USB flash drive!
You can use other storage devices or network installation systems. Because today's computers can not only use U disks to install systems, but also use other storage devices such as CDs, DVDs, etc., and the system can also be installed remotely through the network. If there is no USB flash drive, the system installation can also be completed using other storage devices such as CD, DVD, etc., or the system can be installed remotely through the network. At the same time, before installing the system, you need to confirm whether the computer's boot sequence is set correctly, otherwise the system may not be installed properly.
Click the Start menu in the lower left corner, select Settings, enter the page, click Update and Security, select Recovery on the left, then under Reset this PC, click Start, a pop-up window will pop up, according to personal actual conditions You need to select the corresponding option, and the interface that will delete your application will pop up. After confirming that it is correct, click Next, select Reset, the computer will automatically restart, and you are done.
Copy the system with a USB disk, and then install it
Nowadays, the system installation for assembling computers is very simple and convenient, and only requires a CD.
First enter the bios settings, set the computer to boot first with the CD-ROM drive, then restart the computer and load the system CD into the CD-ROM drive.
The CD will automatically enter the installation state. At this time, you only need to manually re-partition the partitions, and the rest will be completed automatically.
Use pe system to install the operating system.
First make a pe system with a USB disk, and then use the pe system to boot the computer. After entering the pe system interface, use the hard disk partition tool to partition and advanced format the hard disk. After saving, install the operating system Copy the package to a partition other than the system, double-click to run, and follow the prompts to install.
Hello, after assembling the computer and lighting it up, you can follow the following steps to install the system:
1. Prepare an installation disk or U disk. You can download the Windows system image file from the official website and use Rufus or other tools to make it into a USB boot disk.
2. Insert the USB flash drive into the computer, restart the computer and press F12, F11 or F2 to enter the BIOS setting interface.
3. In the BIOS setting interface, find the "Boot" option and put the USB boot device first.
4. Save the settings and exit the BIOS. The computer will automatically restart and boot from the USB flash drive.
5. After entering the system installation interface, follow the prompts. Select the system version to be installed, installation location, etc.
6. After the system installation is completed, enter the user name, password and other information according to the prompts to complete the system settings.
7. After the installation is complete, you can download and install drivers and software.
Notes:
1. Before installing the system, it is best to back up important data to prevent data loss.
2. When installing the system, you need to pay attention to selecting the correct system version, otherwise it may not work properly.
3. After the installation is complete, you need to install the driver, otherwise the hardware may not work properly or the performance may be reduced.
4. When installing software, it is best to choose genuine software to avoid copyright issues.
1. A USB flash drive with a capacity greater than 8g. Before using the USB flash drive, you need to clear or transfer all files in the USB flash drive.
2. Install the Xiaobai system on a computer with Internet access
The first step. Making a USB boot disk
1. Insert the prepared U disk into the computer, open Xiaobai One-Click Reinstall System, and then click Production System.
After assembling the computer yourself, you need to prepare an operating system installation disk or USB flash drive, insert it into the computer and start the computer.
When the computer is turned on, you can press the F12 or DEL key to enter the BIOS settings and choose to boot from the installation disk or U disk.
Then follow the steps prompted by the installer to install the operating system, including selecting the installation hard disk, allocating disk space, entering the product key, setting the user name and password, etc.
During the installation process, you need to pay attention to selecting the correct operating system version, such as Windows 10 Home Edition or Professional Edition.
After the installation is completed, drivers and other software need to be installed to enable the computer to run and be used normally.
The installation method is as follows
1. Prepare the system installation disk or USB boot installation disk.
2. Set the BIOS to boot first. If the system disk is set to CD-ROM boot, if the USB boot disk is set to USB boot.
3. Press any key to enter the installation interface, select the correct installation method and installation drive letter, the system will automatically install the system, we only need to wait for the end, but sometimes you need to operate, such as: time, language settings, etc. aspect.
4. After the installation is completed, it is still not working, because some system disks may come with some drivers, but it is recommended to install the latest drivers.
You can use a USB flash drive to install the system after assembly. After the computer is assembled, a U disk is required to install the system. You can download the U boot disk creation tool of the Win 10 system on other computer devices, and then prepare a U disk of more than 8G to make a U boot disk. , after making the boot door, we only need to boot the assembled computer and enter the BIOS.
Set the U disk startup item as the first boot item, and we can use the prepared startup disk to automatically install the system.
The above is the detailed content of How to install the system on a newly assembled computer without a USB flash drive?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
