Which one is more cost-effective, an assembled computer or a branded computer? This problem has been plaguing many users who want to buy a computer. PHP editor Zimo brings you a comparison of the advantages and disadvantages of assembled computers and branded machines to help you make a wise choice.
If you know about computers, it will definitely be cost-effective to assemble it yourself, but you are afraid that unscrupulous merchants will give you some defective and refurbished parts
It depends on what you are pursuing. If you want service, choose a brand. If you want cost-effectiveness, choose assembly.
A good deal.
Install it yourself, the initiative is in your own hands. You can choose the brand and model according to your personal preference and budget. It is up to you to be rich and frugal. Be confident.
As for the whole machine, you basically have no initiative. It is in your own hands. All I have on hand is the price, and you can eat whatever you want.
If the brand configuration is exactly the same, the whole machine may be cheaper, which is more advantageous than the individual purchase price, but the money can be earned on the whole machine.
Actually speaking from my experience, I never understood computers until I slowly learned how to assemble them by myself. I should transfer my knowledge to software knowledge, learn how to install the computer, etc. Along the way, I recommend that if you are For those who know computers, it is definitely more cost-effective to assemble a computer by yourself, and the configuration is also what you prefer. From CPU, motherboard, memory, hard drive, graphics card chassis, and monitor, you can choose your favorite brand type, appearance and performance. There are also configurations that can be upgraded later. And similarly, as long as you buy genuine products from regular manufacturers and products purchased through regular channels, all the accessories inside are guaranteed. If any one is broken, you can consult after-sales, which can be said to be the same as the brand desktop. The same goes for machines. Because I know computers relatively well, I have dealt with common minor faults myself. This is where it becomes troublesome compared to directly assembled brand desktop computers. That is to say, if you meet someone who doesn't understand, after-sales service is relatively troublesome, but if it is a brand desktop computer, you can directly contact after-sales service and don't have to worry about it yourself.
But then again, in fact, the lifespan of hardware is generally relatively long, and it rarely breaks down after two or three days of use. I have built many, many machines, whether for myself or for friends, and rarely have hardware failures unless I am really unlucky.
Furthermore, in terms of cost performance alone, the higher the configuration of the machine that you assemble yourself, the more money you will save. The money saved may be relatively less with low configuration, but if the configuration is slightly higher, The money saved may be able to build a cheaper machine. I am sharing a group of photos that netizens have shared before. As a reference, you can adopt some opinions. If you have a certain computer foundation, I suggest you assemble one, or find a more reliable friend, or rely on someone to help you. A reliable merchant will set one up for you. This configuration picture is only used as a price reference, not for you to configure according to this picture. For actual needs, you can choose what configuration you need, thank you!
Computer host assembly and direct purchase of the complete machine have their own advantages and disadvantages. Which one is more cost-effective depends on personal needs and circumstances.
The advantages of the assembly machine are:
You can freely choose accessories: The assembly machine can freely choose accessories according to personal needs, and you can choose accessories with better performance or more suitable ones according to your own needs. In order to achieve better cost performance and user experience.
The price is relatively cheap: Compared with the complete machine, the price of the assembled machine is generally cheaper, because you can freely choose accessories according to actual needs, avoiding the waste of buying unnecessary accessories.
Convenient maintenance and upgrades: The hardware of the assembly machine can be maintained and upgraded as needed, which can more flexibly meet different needs.
The advantages of buying a complete machine are:
Saving time and effort: Buying a complete machine eliminates the need for steps such as selecting accessories, assembly and installation, which can save a lot of time and energy.
High stability: The hardware configuration and compatibility of the entire machine have been tested and verified, so the stability is relatively high and compatibility problems are not prone to occur.
After-sales service is more guaranteed: After-sales service for the entire machine is usually more guaranteed, with a longer warranty period and a more complete service system.
Therefore, if you are familiar with computer hardware, have certain technical capabilities, and need the freedom to choose hardware accessories and higher cost performance, then the assembly machine may be more suitable for you. If you are not familiar with computer hardware, or need to save time and effort, have higher stability and better after-sales service, then it may be more suitable to purchase the complete machine directly.
To answer this question, you must first confirm that if you are completely pursuing cost-effectiveness and you are an experienced DIY player, it is definitely cost-effective to assemble your own computer with the same configuration.
If you are a computer novice, you have certain requirements for computer stability. Definitely the preferred brand machine. Branded machines will be tested for compatibility of accessories before assembly. Ensure the stable operation of the machine.
It’s a good deal. No matter when you assemble the computer, it’s cost-effective, and it’s easy to replace parts.
It’s more cost-effective to assemble it yourself. You can freely choose cost-effective components
Laptop computer assembly is not at the same level as desktop computer assembly. First of all, assembling a barebone notebook requires a lot of materials. For example, chassis, monitor, motherboard, power supply, etc. You need to be familiar with various materials to match them. The most important thing is the matching of the chassis and radiator. If they don’t match, you can’t install them unless you are an expert. .
Also, notebook accessories are generally difficult to buy, the capital investment risk is high, the hardware is prone to incompatibility, the notebook space is small, disassembly and assembly are difficult, and the technical level of DIYers is high. If you are a master For advanced experts, it is cost-effective to assemble it yourself. However, the craftsmanship of self-assembled laptops is incomparable with brand-name machines. There is no after-sales service for self-assembled laptops, and it will be very troublesome if problems arise in the future. Therefore, it is not recommended to
Yes, generally high-end molds from Blue Sky and MSI can be replaced with parts by yourself, but most parts are customized, so they are essentially different from the assembly of desktop computers.
From a DIY perspective, as long as major manufacturers design their computers with a unified interface so that their respective accessories can be universally replaced, in theory, true DIY can be achieved. This depends on the cooperation of the entire DIY notebook industry. At present, Zanben.com already provides DIY notebooks with shells, motherboards, and display panels separately. But it still feels a bit barebones. However, the choice is still relatively better than providing a quasi-system.
The above is the detailed content of Is it cost-effective to build your own computer? Is it more cost-effective to assemble a computer or a brand-name computer?. For more information, please follow other related articles on the PHP Chinese website!
![[Web front-end] Node.js quick start](https://img.php.cn/upload/course/000/000/067/662b5d34ba7c0227.png)
