Windows automatic repair loop fix

Use the installation media to enter the recovery environment; 2. Run the bootrec command to repair the boot records; 3. Check for disk errors and repair system files; 4. Disable automatic repair as a temporary means. The Windows automatic repair loop is usually caused by system files corruption, hard disk errors or boot configuration abnormalities. The solution includes troubleshooting by installing the USB flash drive into the recovery environment, using bootrec to repair MBR and BCD, running chkdsk and DISM/sfc to repair disk and system files. If it is invalid, the automatic repair function can be temporarily disabled, but the root cause needs to be checked later to ensure that the hard disk and boot structure are normal.

Windows automatically repairs loop problems, which usually happens when the system cannot boot normally. At this time, the "automatic repair" interface will be repeatedly entered. Trying to repair but it will never succeed. This situation is mostly caused by system files, hard disk errors, or abnormal startup configuration data.

If you encounter this problem, the following methods can help you solve it.

1. Use the installation media to enter the recovery environment

If your computer is stuck in the "trying to repair your computer", the most direct way is to install the USB disk or CD through Windows to enter the recovery environment.

• Insert the installation media and restart the computer
• Select Start from USB drive (usually F12, Esc, or Delete keys) in the BIOS or boot menu
• After entering, select the language and keyboard settings and click "Next"
• Click "Repair Computer" > "Troubleshooting" > "Advanced Options"

Here you can execute command prompt, system restore, start repair and other operations.

2. Run the bootrec command to repair the boot record

In the command prompt mentioned above, enter the following command:

• bootrec /fixmbr
• bootrec /fixboot
• bootrec /rebuildbcd

These three steps are used to repair the main boot record, write the startup sector, and rebuild the BCD (start configuration data). If the hard disk partition is not seriously damaged, it can generally solve the problem.

Note: If the system partition is not found, it may be because there is a problem with the partition table, or there is a physical bad channel on the hard disk.

3. Check for disk errors and repair system files

Sometimes system files are corrupted and can also cause an automatic repair loop. You can try running the following command:

• chkdsk /f /r
  Check and fix disk errors, the process can take several minutes.

• DISM /Image:C:\ /Cleanup-Image /RestoreHealth
  (Note: C: It is the system disk, modified according to actual conditions)
  If DISM completes successfully, run again:

• sfc /scannow /offbootdir=C:\ /offwindir=C:\Windows

This step will scan the system files and try to repair them.

4. Disable automatic repair as a temporary means

If none of the above methods work, you can try to temporarily turn off the automatic repair function:

Run in the command prompt:

• bcdedit /set {default} recoveryenabled No
• bcdedit /set bootstatuspolicy ignoreallfailures

This allows the system to skip the automatic repair process and try to start directly. But this is just bypassing the problem and cannot be completely solved. It is recommended that the root cause be fixed in the future.

Basically these common methods. The situation is different for each computer and it may require multiple steps to solve it in combination. When encountering this kind of problem, don’t worry, check it step by step, the key is to confirm that the hard drive is fine and the system boot structure is complete.

The above is the detailed content of Windows automatic repair loop fix. For more information, please follow other related articles on the PHP Chinese website!