Article Introduction：1. Open 3DsMAX and draw the following graphics. 2. If you want to select the cone and cylinder at the same time, you can click the cone and hold down the [Ctrl] key while selecting the cylinder. 3. When the teapot, cone, ring and cylinder are cumulatively selected at the same time, and you suddenly regret selecting the ring, you can press the Alt key while selecting the ring, which cancels the selection of the ring. 4. When the teapot, cone and cylinder are selected, press [Ctrl+I] to invert the selection, that is, other objects other than the teapot, cone and cylinder are selected. 5. Sometimes the drawn graphics are difficult to select among the graphics. You can also select by object name, such as selecting a cone and a cylinder. I can select the cone in the name and press Ctrl to select the cylinder at the same time. 6. Similarly, by name

2024-04-08 comment 0  811

Article Introduction：1. Open UG10.0 and create a new modeling file. Select cylinder in the shortcut menu bar, specify the vector direction for the cylinder, determine the center point, and set the parameters of the cylinder. After confirming, you can get a cylinder. This cylinder is the base of the workpiece. Other structures are created on top of it. 2. Select [Chamfer] to chamfer the symmetrical angle on the cylinder: 5. This step can also be done together with the final adjustments to the details. 3. Select the [Boss] command and set the parameters of the boss on the placement surface of the boss in the pop-up dialog box: diameter: 120; height: 20. In the final positioning, select point to point and select the top center of the basic cylinder. The second boss is also completed in the same way, but the surface it is placed on is the top of the previous boss. 4. Round the second boss

2024-04-09 comment 0  604

Article Introduction：1. Open 3DsMAX, use the cylinder on the right to create an elongated cylinder, and draw a straight line path. 2. Select the cylinder and find Path Deformation (wsm) in the modifier list in the modification panel on the right. 3. Click Extract Path under Path Transformation, and then select a straight line. 4. The current effect does not meet our requirements, then click to go to the path. 5. Keep pressing the percentage parameter, and the long cylinder will change with the percentage change. The ratio means that the position of the object on the path can be adjusted. 6. By modifying the stretching parameters, the object can be scaled on a straight path. Note: You cannot delete the path, otherwise the object will return to its original shape. You can hide it or convert the object to an editable polygon.

2024-04-08 comment 0  849

Article Introduction：Many users are using CorelDrawX4 software, but do you know how to draw a cylinder in CorelDrawX4? Below, the editor will bring you the method of drawing a cylinder in CorelDrawX4. Interested users can come and take a look below. Open the CorelDRAWX4 software settings page, which is 594mm long and 297mm wide. Click the rectangle tool and set the length to 100mm, width to 170mm, coordinates x: 250mm, y: 160mm. 2 Click the Ellipse tool to draw an ellipse at the appropriate position on the right side of the rectangle, with the long axis 100mm and the short axis 60mm, and press Ctrl+D to make a copy. Move an ellipse to the bottom of the rectangle, coordinates x: 250mm, y: 75mm. 1 click menu

2024-03-04 comment 0  935

Article Introduction：In the C programming language, we can use structures to find the area of ​​a circle, the area and volume of a cylinder. The logic used to find the area of ​​a circle is as follows: s.areacircle=(float)pi*s.radius*s.radius; the logic used to find the area of ​​a cylinder is as follows: s.areacylinder=(float)2*pi*s .radius*s.line+2*s.areacircle;The logic used to find the volume of the cylinder is −s.volumecylinder=s.areacircle*s.line;The algorithm refers to the algorithm given below, which is calculated by using the structure Yuanhe

2023-08-29 comment 0  954

Article Introduction：1. First start the software and create a new part (Ctrl+N). 2. First draw a rectangle on the front datum plane and use the extruded boss feature to stretch it into a rectangular parallelepiped. The parameters are as shown in the figure. 3. Draw a cylinder on the upper surface of the cuboid, first create a new sketch on the surface, and then use the extruded boss feature to extrude it, as shown in the figure. 4. Add a new datum plane at the middle surface of the cuboid with parameters as shown in the figure. 5. Use the mirror feature to mirror the cylinder. The effect is as shown in the figure.

2024-04-12 comment 0  1165

Article Introduction：1. Open 3DsMAX, take a cylinder as an example, and find the taper modifier in the modification panel. 2. When the number under the taper parameter of the modification panel is changed to 1, the upper end of the cylinder tapers outward. 3. If the number of parameters is given as a negative number, such as -1, then the upper end of the original cylinder will be tapered inward. 4. If you want the lower end of the cylinder to be tapered, you can move the tapering center upward. Alignment tools can be used to move the center of taper to the upper surface of the cylinder. 5. Then use the taper modifier again, and the lower end of the cylinder is tapered. 6. In the same way, if the taper center is moved to the middle of the cylinder, the upper and lower surfaces of the cylinder will be tapered at the same time. When a certain value is entered under the curve, the cylinder not only tapers, but also has a certain curve. Negative values ​​mean concave inward, positive values ​​mean

2024-04-08 comment 0  445

Article Introduction：1. Open 3DsMAX and take this picture as an example. 2. If you want to freeze one of the objects, such as the cylinder in the middle. After selecting the cylinder, right-click and select [Freeze Current Selection], and the frozen cylinder will display the frozen object in black and white. 3. If you want to freeze all objects, select all objects or press [Ctrl+a], right-click and select [Freeze Current Selection], and all objects will return to black and white display. 4. If you want to unfreeze all, right-click and select [Unfreeze All]. 5. If you only want to unfreeze a certain object such as the cylinder in the middle. Then find the display panel. 6. Scroll all the way to the [Freeze] sidebar, click [Click to Unfreeze], and click on the object you want to unfreeze to unfreeze it immediately.

2024-04-08 comment 0  348

Article Introduction：1. Open PPT and enter its main interface. 2. Delete the two input boxes of Click here to add title and subtitle. 3. Click the Insert menu and select the Shape tool. 4. Find and click on the cylinder in the basic shape to draw a cylinder. 5. Click Format and select Shape Fill. 6. Click on the gradient and click on other gradients in the drop-down menu that opens. 7. Select Gradient Fill, click on the long yellow sand in the preset color, and click Close. 8. We have created a long yellow sand gradient cylinder in PPT.

2024-03-26 comment 0  839

Article Introduction：1. How to adjust the round characters on the computer? Computer round fonts are composed of fonts and font sizes, which can be adjusted by the following methods: 1. Select the round font in the editing software you are using, such as Microsoft Yahei, Yuanti, etc. 2. Adjust the font size to a suitable size. It is generally recommended to be larger than 16-point font. 3. For some round characters stored as pictures, they can be adjusted by modifying the size of the picture or using picture processing software. If you want a more vivid round word effect, you can try to use some design software, such as Illustrator, Photoshop, etc., to achieve it by drawing vector graphics or hand-drawn mode. 2. A circular crosshair appears on the computer screen? 1． First, right-click on the desktop and select the "Properties" option in the pop-up dialog box. 2.

2024-09-03 comment 0  609

Article Introduction：The size of 18650 battery refers to the diameter of 18mm and the length of 65mm, where 0 means cylindrical battery; the capacity of 18650 battery is usually 1200mAh-3350mAh, and the common capacity is 2200mAh-2600mAh.

2022-12-23 comment 0  19817

Article Introduction：1. Open the UG software and create a new blank model file. 2. As shown in the figure, execute [Menu - Insert - Design Features - Cylinder], everything will be defaulted, and a cylinder will be created for later demonstration. 3. As shown in the figure, click [Drawing] in the application module to create a new drawing page and create an engineering drawing for use in subsequent demonstrations. 4. As shown in the figure, click the [Hatch] icon in the toolbar to activate this command. 5. As shown in the figure, a [Section Line] dialog box appears in the software, and then [Select Mode] selects [Points in Area], which may be the default. 6. As shown in the picture, click the left mouse button in the middle of the circle, and then click OK to make everything default. 7. As shown in the picture, a hatch line has been successfully added in the middle of the circle.

2024-04-09 comment 0  692

Article Introduction：Example description: Click Insert - Shape - Select Cube - Insert two cubes overlapping top to bottom. When you look down, you can see the top shape, but not the other ones - click Insert - Shape - select any polygon and draw the upper shape. Another example is to place two cubes side by side, use any polygon to draw the outer outline of the upper side - and then use straight lines to draw the middle intersection, and you will get a figure of two rectangles put together. As shown in the picture, it is a hollow cylinder. When looking from above, you can only see a ring composed of a large circle and a small circle, so drawing a ring is its top view. In order to enhance the understanding of the overhead view in daily life, first use the mobile phone to take a photo looking down, as shown in the picture, use the mobile phone to take a cylindrical cup upside down on the table, and understand the overhead view.

2024-04-17 comment 0  610

Article Introduction：The article brought to you in this chapter is about the excel2007 software. Do you know how to add a column chart in excel2007? Next, the editor will bring you the method of adding a column chart in excel2007. Interested users can read below Let's see. Open the Excel 2007 table to which you want to add a cylindrical chart. Click Insert --- Column Chart. We can see that there are many cylindrical chart styles to choose from. Select the most appropriate one and click Add. First select all the data to be represented graphically, and then follow steps 2 and 3 to add charts. Right-click the chart and select Add Data Image to add data to the chart. The data has been added. You can also change the chart style by right-clicking on the chart. we can

2024-03-06 comment 0  1070

Article Introduction：DoNews reported on April 23 that according to "Everyone Auto" citing multiple independent sources, Great Wall Motors is undergoing a new round of organizational adjustments, and the number of centers has been expanded to eight. At the beginning of this year, a new media live broadcast operation center was added. Recently, A new product management center has been added. According to reports, Great Wall Motors currently has a public relations and communication center, a channel development center, a user operation center, a sales and service center, a digital intelligence center, a terminal operation center, a new media live broadcast operation center and a product management center. Of the eight major platforms in Taiwan, only the channel development platform is shown in the status of pending adjustment. The entire Great Wall Motors middle office is led by Li Ruifeng, chief growth officer of Great Wall Motors, who reports directly to Wei Jianjun, chairman of Great Wall Motors. According to a mid-level employee of Great Wall Motors, Great Wall Motors’ previous marketing mainly focused on vehicle models.

2024-04-24 comment 0  639

Article Introduction：Greatwall is a computer under the Great Wall brand; Great Wall computers refer to computer products with the registered trademark "Great Wall" produced by China Great Wall Computer Shenzhen Co., Ltd.; Great Wall products include desktop computers, notebook computers, servers, digital printing order machines, and karaoke points Song machine, hotel all-in-one machine, etc.

2022-11-30 comment 0  10951

Article Introduction：Open the CorelDRAWX4 software settings page, which is 594mm long and 297mm wide. Click the rectangle tool and set the length to 100mm, width to 170mm, coordinates x: 250mm, y: 160mm. 2 Click the Ellipse tool to draw an ellipse at the appropriate position on the right side of the rectangle, with the long axis 100mm and the short axis 60mm, and press Ctrl+D to make a copy. Move an ellipse to the bottom of the rectangle, coordinates x: 250mm, y: 75mm. 1 Click Window - Dockers - Shape - Welding in the menu to draw a rectangle + arc diagram. Move another ellipse to the top edge of the picture above, with coordinates x: 250mm, y: 245mm. Use Window - Dockers - Shape - Trim in the menu bar, and set only the source object to be retained in trimming.

2024-06-10 comment 0  748

Article Introduction：According to 36Kr’s report, BMW launched an external tender for about 160GWh of battery orders at the beginning of this year, which were eventually won by Honeycomb Energy, CATL and Everwin Lithium Energy. Honeycomb Energy won an order for nearly 90GWh of BMW’s European region, while Ningde Times and Yiwei Lithium Energy will share nearly 70GWh of domestic orders. If estimated at 0.6 yuan per watt-hour, the value of BMW's order will reach 96 billion yuan. BMW has previously reached strategic cooperation with CATL and EV Lithium on large cylindrical batteries, so this additional order is reasonable. However, the nearly 70GWh orders given to the two companies this time are not limited to cylindrical batteries. According to the public information on this website, Honeycomb Energy was born out of Great Wall's power battery division in 2018 and is headquartered in Changzhou, Jiangsu.

2023-10-12 comment 0  1226

Article Introduction：This website reported on November 28 that according to the latest report released by TrendForce, against the background of the slowdown in the power semiconductor market, mainland Chinese companies have sought breakthroughs in the fields of 12-inch wafers and IGBTs and have achieved outstanding results. In the first half of 2023, the revenue growth of well-known Chinese wafer foundries such as SMIC, Hua Hong Semiconductor, Hefei Jinghe Integrated Circuit (Nexchip) and Shaoxing Semiconductor Manufacturing Co., Ltd. (SMEC) slowed down. Only Hua Hong's revenue increased slightly. Growth, the revenue of SMIC, Jinghe Integration and SMIC fell by 19.29%, 50.43% and 24.08% respectively year-on-year. Due to the downturn in the consumer electronics, personal computer and communications markets, the overall performance of China's wafer fabs is entering a downward cycle. Source: Shaoxing SMIC

2023-11-28 comment 0  571