Article Introduction：Does anyone know how to use the PS pen tool? Below, the editor will bring you how to use the PS pen tool. I hope it will be helpful to everyone. Let’s follow the editor to learn it! How to use ps pen tool? How to use the PS pen tool 1. First, we [open] a picture (as shown in the picture). 2. We click [Pen Tool], select [Path], and check the [Rubber Band] above (as shown in the picture). 3. Use the mouse to click anywhere on the canvas as the first path point. A small circle will appear, indicating the starting point of the path. Where you need to draw a curve, continue to click the mouse to draw straight lines and curve path points. The path automatically bends into a smooth curve. We press the [Ctrl key] to adjust the position and

2024-08-16 comment 0  893

Article Introduction：Many friends don’t know how to use the PS Pen Tool, so the editor will share the tutorial on how to use the PS Pen Tool. Let’s take a look. I believe it will be helpful to everyone. 1. Open the PS software and enter the interface, as shown in the figure below: 2. Click the pen tool and click the aiming point to pull out the slider, as shown in the figure below: 3. Hold down the alt key to adjust the slider, as shown in the figure below: 4 .Hold down the ctrl key to drag the aiming point, as shown in the figure below: 5. Adjust the slider, right-click to create a selection and add a mask, as shown in the figure below: The above is the PS pen tool that the editor brings to you. All the content is used, I hope it can be helpful to everyone.

2024-03-04 comment 0  685

Article Introduction：1. Open the Flash software and you can see the software interface. Draw animations on the stage canvas. Here, select the pen tool on the toolbar with the mouse, such as. 2. Drag the left mouse button on the canvas to draw several lines. 3. Press the ESC button to cancel and continue drawing. At this time, the line changes from green to black. It means that the lines drawn by the pen are drawn. 4. Use the pen tool to draw a closed line. At this time, you can see that the closed area of ​​the line is filled with blue. 5. Press the ESC button to cancel and continue drawing. At this time, the line changes from green to black. Indicates that the closed line of the pen drawing has been drawn. 6. You can also use the pen tool to draw a curve and drag the nodes to adjust the curve.

2024-04-10 comment 0  455

Article Introduction：1. First open [AdobeXD]. 2. Then select the canvas size. 3. Click the sixth pen tool on the left. 4. Finally, hold down the left button to draw, and you can draw the path you want.

2024-04-10 comment 0  1056

Article Introduction：First, we use PS to open a picture to be edited. In the second step, use the pen tool to draw the area. Step 3: After clicking the marquee tool, press Ctrl+enter, right-click in the selection and click "Select Inverse". Finish

2019-05-30 comment 0  21027

Article Introduction：1. First rotate the pen tool and rotate [Path] in the option bar. 2. Then click on the canvas to add the first point, and click again to add the second point. For straight lines, hold down the SHIFT key. 3. Now set the foreground color to black, right-click on the canvas and rotate [Stroke Sub-Path]. 4. Finally, rotate the [Pencil] and click [OK]. In this way, the lines drawn by the pen tool are completed.

2024-06-04 comment 0  788

Article Introduction：CorelDRAW has many tools that can help users draw pictures faster, among which the Pen Tool and Bezier Tool are very convenient to use. Many new users say that the usage of these two tools is similar, which is true. But there are still obvious differences in some tiny details. Let me introduce to you the two most obvious differences! The specific differences are as follows: When using the pen tool to draw lines, you can observe the line direction in advance through the preview function, while the Bezier tool does not have this function. Before using the pen tool to draw a line, just click the small "Preview Mode" icon at the top of the page to preview the direction of the line. You can see the solid blue line in preview mode, which shows the preview direction of the line. 2. The difference between adding nodes 1) Use the pen tool to draw

2024-02-13 comment 0  821

Article Introduction：PS is a powerful image post-processing software with many practical functions. Among them is the pen tool function, which can turn the required area into a closed path. How should it be turned into a selection after closing? I believe there are still some users who are not clear about it. Today I have compiled a detailed tutorial to share with you. Come and read it together. How to turn a closed path into a selection after using the PS Pen Tool? Open a picture using PS. Use the Pen Tool to draw in the diagram. Click on the selection. You can also right-click the pen-drawn position in the picture and select Create a selection. Set the feathering value and click OK. The effect is as follows.

2024-08-30 comment 0  931

Article Introduction：1. After opening the interface, click the file menu in the upper left corner to create a new blank file. 2. Click the pen tool in the toolbar to outline the shape of the leaves. 3. Then use the pen tool again to add texture curves to the leaves and copy two identical ones. Leaves can be rotated and combined

2024-06-05 comment 0  628

Article Introduction：1. First open the material picture and use the pen tool to cut out the picture. 2. Then click the pen tool on the toolbar to cut out the outer pixels. 3. Then press the shortcut key Ctrl + Enter key to convert the path into a selection and copy the layer. 4. Then on the copied layer, use the Pen Tool to create a path for the inner pixels. 5. Then use the shortcut keys to convert it into a selection, and finally press the delete key to delete it. Note: Press the shortcut key Ctrl+Enter to convert the path into a selection, and then copy the layer.

2024-06-06 comment 0  860

Article Introduction：1. First open the ai software and click the pen tool to draw the path line. When the mouse is not clicked, an auxiliary line will appear on the edge. Close it below. 2. Then click Edit, find Preferences or press the shortcut key Ctrl+K. 3. Then click on the selection and anchor point display options in the pop-up drop-down menu. 4. Then there is a rubber band enable at the bottom and find the pen tool. 5. Then remove the previous check mark and click OK. At this time, the auxiliary lines will not appear when you draw again. Note: Click on the selection and anchor display options in the pop-up drop-down menu.

2024-06-04 comment 0  926

Article Introduction：There are many useful tools in CorelDRAW, many of which can be used to draw curves, such as the Bezier tool and the Pen tool. For many novices, the pen tool is not so easy to control. When drawing curves, it will appear to bend and cannot draw ideal lines. What should I do? Let’s take a look at the solution next! The specific operations are as follows: 1. Open the CorelDRAW software and click the pen tool to draw a curve. At this time, we can clearly see the deviation at the bend. 2. Pause the drawing curve and select the node where the bend is made. 3. Click delete and you will find the curve. This happens when drawing curves with the Pen Tool becomes smoother because it comes with a preview function, which allows it to predict the direction of the user's curve.

2024-02-12 comment 0  955

Article Introduction：Open Photoshop and import the pictures you need to process. Select the Pen Tool and create a new blank layer. Use the pen tool to click a point on the edge of the object that needs to be cut out, and then click again along its edge in one direction. Do not let go immediately, and then drag out the two anchor points to make the curve between the two points fit. Object edge. It should be noted that at the reverse inflection point, we need to hold down the alt key to disconnect the anchor point. There is no need to do that when going forward. Use a pen to outline along the edge of the object, and press the ctrl+enter keys on the keyboard to turn the path into a selection. Select the background layer, click the button below to add a layer mask, and add a layer mask to cut out the object. The effect is as shown in the picture.

2024-04-17 comment 0  1146

Article Introduction：1. We first open the software and create a new layer. 2. Then we can click on this tool, the pen tool. 3. We can draw on the page. 4. At this point, we will see the brush size options below. 5. Then we can just click on the larger one and choose directly. 6. Finally, we can see the effect by painting on the canvas.

2024-04-08 comment 0  925

Article Introduction：First we use the brush tool and make the following settings in the brush options. Check [Shape Dynamics] and set the [Control] inside to [Pen Pressure]. Then adjust the brush hardness to 100%. Then we use the pen tool to outline the path of the line on the canvas. After painting, we choose a suitable color, right-click on the screen, select [Stroke Path] in the menu, select [Brush] as the tool, and check Simulate Pressure. Then cancel the path and add an outer glow effect to the line layer, so that an outer glow line is ready! Then copy a few more lines and the effect will be great. Isn't it very simple? You can draw any type of lines. As long as you draw well and follow the settings above, all kinds of lines can be beautiful. Go and try it now.

2024-06-02 comment 0  725

Article Introduction：1. First, we open the software and import a video (Ctrl+O to open the folder and click OK). 2. Capture a video at will (the shortcut key is S) and click on the small square in the lower corner of the video. 3. Check the mask and click the Pen Tool. 4. We first randomly clicked a few anchor points on the screen to make a selection, and found that the chin of any character was missing. 5. If we directly hold down the mouse and drag, it will turn into a curve. The correct way is to click in the middle, add an anchor point, hold down the Ctrl key and drag the newly added anchor point, and the curve will not appear. 6. If we want to draw a very standard triangle selection, we can click on the rectangular selection box, draw an area on the screen, and then delete the anchor point. You can also use your imagination to only make the shape you need.

2024-05-09 comment 0  1110

Article Introduction：Open the pscs6 software and of course draw a path. Then the normal thing is to directly right-click under the pen tool and select [Stroke Path] to stroke the path. The problem you may encounter at this time is that the [Simulate Pressure] option is checked, but after confirmation, the path drawn does not have the effect of simulating pressure, but is a line of equal thickness from beginning to end. So how should this problem be solved? It's very simple. In fact, it's just because our brush options have not been adjusted properly. After the adjustment is completed according to the following process, the lost pen pressure can be easily recovered. Before stroking the same path, we first select the brush tool, and then press the F5 shortcut key on the keyboard to open the brush preset panel. Note: Be sure to select the brush tool, no

2024-04-18 comment 0  566

Article Introduction：1. First select the desktop Coreldraw format picture. 2. Then click the folder button to open the file. 3. Finally, click the plus sign in the left column and click the pen to open it.

2024-04-07 comment 0  827

Article Introduction：Many friends still don’t know how to use the PS Healing Brush Tool, so the editor below explains the tutorial on how to use the PS Healing Brush Tool. If you are in need, hurry up and take a look. I believe it will be helpful to everyone. 1. Open the picture and click to open the "Healing Brush Tool" on the left toolbar (as shown in the figure below); 2. Set the size, hardness, spacing and sampling parameters of the "Healing Brush Tool" (as shown in the figure below); 3. When you want Set the sampling "source point" on the nearest edge to be repaired, and repair it at the place to be repaired (as shown in the figure below); 4. Open the "Smear Tool", smear the repaired image, and complete (as shown in the figure below). The above is all the content on how to use the PS repair brush tool that the editor has brought to you. I hope it can be useful to you.

2024-03-06 comment 0  1156

Article Introduction：在photoshop中,画笔是一个比较常用的工具,但要想真正用好 画笔工具其实并不容易,主要原因是其属性相当复杂多样,很多人学习PS只是应用画笔的表面功能。那么你真的会用PS中的笔刷中画笔工具？本文将为大家介绍十条最基本的画笔工具使用心得及技巧，希望对PS学习者有所帮助

2016-06-01 comment 0  1363