Article Introduction：Without a doubt, it is one of the most frustrating situations when your iPhone volume buttons are stuck or broken. The sound on iPhone is played too loud or too low, which is a common problem faced by many iPhone users. There could be many reasons for this. It could be due to hardware issues or dirt, or your device's volume buttons are damaged. Recently, many iPhone users reported iPhone6 ​​volume button stuck and how to fix it. That's why we came up with various ways to fix the volume buttons on iPhoneXR/XS/X/8/7/6s/6/5s/5/5c. Tip 1: Clean the volume buttons Tip 2: Clean the charging port and headphone jack Tip 3: Squeeze the volume buttons Tip 4: Update on your device

2024-01-06 comment 0  1447

Article Introduction：Users can adjust the volume using buttons on the side of the device, which control the volume of ringtones, alerts, and other sound effects, and users can use Hearing Aid Mode, which increases the volume on the phone. How to make your iPhone louder with a low volume? 1. You can adjust the volume using the buttons on the side of the device. These buttons can control the volume of ringtones, reminders, and other sound effects. 2. Hearing aid mode can be used. 3. In the accessibility list, find the "Hearing Aid Device" option, click to enter, and turn on the "Hearing Aid Mode" switch. 4. Another way to increase the volume on your iPhone is to enable mono audio. This feature combines two-channel audio into mono, thereby increasing the volume. 5. Find the "Accessibility" option, click to enter, in the accessibility list

2024-03-08 comment 0  649

Article Introduction：1. First click on the small daily icon installed on the mobile phone desktop. 2. Then click More on the lower right side of the interface. 3. Then click the Settings button. 4. Finally, click the button sound to set it.

2024-06-03 comment 0  1055

Article Introduction：1. First click to open the settings on your phone. 2. Then click on Sounds and Touch on the page. 3. Next, click the button behind the key tone. 4. After turning on the key tone, there will be sound when typing.

2024-03-22 comment 0  666

Article Introduction：1. Why did my computer suddenly have no sound today? The reason is that the Win8 laptop did not turn off the sound. According to the problem description: the Win8 laptop suddenly had no sound, although no sound-related operations were performed. Solution: Check the hardware connection: Make sure the speakers or headphones are properly connected to the laptop's audio jack. Adjust volume settings: Check your system volume settings to make sure the volume isn't accidentally turned down or muted. Check the driver: Make sure the sound card driver is the latest version. If necessary, try reinstalling the sound card driver. Examples: Check hardware connections, adjust volume settings, check and update sound card drivers to ensure there are no unexpected settings or driver issues causing no sound. 2. What should I do if there is no sound in the Win8 system speaker? Problem description: In the Win8 system, the speaker

2024-01-15 comment 0  1153

Article Introduction：1. First, in the task on the right, click on the sound, right-click the mouse and select the [Sound] option. 2. Then select [Stereo Mixed Sound], right-click the mouse and select the [Start] button, and click the [OK] button. 3. Open the audacity software, select [windowsWASAP] and select the speaker option on the menu bar. 4. Finally, click the [little red dot] to record and click the export option under the file.

2024-06-03 comment 0  371

Article Introduction：How to set incoming call ringtone on Kugou Music? The first step is to open Kugou Music on your phone, enter the homepage and click the three horizontal icons in the upper right corner. Then in the pop-up function bar page, select the ringtone option, then click the button behind the ringtone, and finally click Set as incoming call. button and that's it. Please see the detailed graphic introduction below. How to set incoming call ringtone on Kugou Music 1. Open the Kugou Music game and click the three buttons. 2. Then click on the ringtone option. 3. Then click the button behind the ringtone. 4. Finally, click the Set as incoming call button.

2024-07-01 comment 0  320

Article Introduction：1. First enter 58.com and click Settings in the upper right corner. 2. Then click Sound. 3. Finally, turn on the button on the right side of the sound, so that the sound is turned on.

2024-05-07 comment 0  957

Article Introduction：Baidu input method has rich function settings, including control of key sounds. When we want to turn off the key press sound, we can follow the steps below. So how to turn off the key sound? Follow us below to take a look. How to turn off the key sound 1. Open Baidu input method, enter my page, and click the settings icon. 2. Click Keyboard Interface Settings. 3. Click sound effects and vibration. 4. Find the button volume and turn off the switch on the right.

2024-06-04 comment 0  387

Article Introduction：Steps to cancel Douyin favorite button setting: Log in to Douyin. click me". Open Settings. Find "Favorite Button Status" and uncheck it.

2024-05-04 comment 0  1021

Article Introduction：1. First open the Cutout APP and click the Start Creating button above. 2. Add video files. 3. Click to add audio function. 4. Then click the recording function at the bottom. 5. Click and hold the recording button. You need to keep pressing the button until the recording is completed. 6. After the recording is completed, click √ in the lower right corner to save the recording. 7. After selecting the recording file, click the voice change function at the bottom. 8. Here you can change the sound effect, choose a voice changing effect you like, and then click √ to save. 9. If there are no problems during the audition, you can click the export button on the upper right to export the video.

2024-04-15 comment 0  1054

Article Introduction：Button Parameter "Command" Execution Upon Declaration: ResolvedIn tkinter, the "command" parameter of the Button widget is intended to execute a callback when the button is pressed. However, it's puzzling why the callback function

2024-10-19 comment 0  590

Article Introduction：The Redmi 13c is a powerful smartphone, but sometimes the sound of key presses can be uncomfortable. For those users who don't like the sound of key presses, turning off the key press sound is an important feature. Fortunately, Redmi 13c provides a simple operation to turn off the key sound, allowing users to enjoy a more peaceful experience. How to turn off the key sound on Redmi 13c 1. Bring up the keyboard on your phone and click on the icon in the upper left corner of the keyboard. 2. Click sound effects and vibration. 3. Slide the button volume bar to the far left. Through the above simple steps, you can easily turn off the key sound of Redmi 13c to make the use experience more comfortable. Whether in public or in a quiet environment, you can enjoy using Redmi 13c without disturbing others.

2024-03-19 comment 0  865

Article Introduction：Baidu Input Method provides users with the ability to change key sounds, making the input experience more personalized. So how to change the key sound? Follow us below to take a look. How to change the key sound 1. First enter the Baidu input method software interface and click [du]. 2. Then enter the interface and click [Sound Effects and Vibration]. 3. Finally enter the interface and select your favorite sound effects to set.

2024-06-02 comment 0  975

Article Introduction：1. First open the phone settings and click [Sound & Touch]. 2. Then click the button after [Lock Sound] to turn it off.

2024-03-23 comment 0  784

Article Introduction：Use Settings to change system sounds on Windows 11 You can easily change system sounds on Windows 11 using the Settings app. To change system sounds in Settings, use the following steps: Press the Windows key or click the Start button to launch the Start menu and open Settings. When Settings opens, click Personalization in the list on the left, then select Themes on the right. On the following screen, click the SoundsWindowsDefault button. When the Sound screen appears, make sure the Sound tab is selected. Under the Program Events section, select the event for which you want to change the sound, and then select the new sound from the Sound drop-down list. For example, below we change the sound of new email notification

2023-04-14 comment 0  2025

Article Introduction：The voice-sizing feature of the Dub Show platform provides users with a flexible way to optimize their voice-over work. This feature allows users to precisely control the volume of vocals according to their needs and preferences, ensuring a balance between dubbing and background music or other sound effects, creating a more harmonious and professional listening experience. How to adjust the vocal size If you want to adjust the adult voice in a sound program, the user needs to search for dubbing materials from the homepage of the software, enter the material details page, and click the "Dubbing Now" button at the bottom. 2. Next, you need to record through the microphone button at the bottom, and then you can adjust the sound size after recording the dubbing. 3. In this way, click the sound button in the vocal menu in the editing interface (as shown below) and drag the progress bar.

2024-06-24 comment 0  642

Article Introduction：As a powerful smartphone, Redmi 13c provides many personalized settings, such as return key sounds. This sound not only adds fun and feedback to mobile phone operations, but also makes your experience richer. If you don’t know how to set the return key sound, don’t worry, we will explain it to you in detail next. How to set the return button sound on Redmi 13c 1. Click to open the "Mobile Desktop Settings" option of Redmi; 2. Find and open the "All Settings" option, find and open the "Sound and Vibration" option; 3. After entering the sound vibration interface Select the system item; 4. Find the key tone setting and click Settings to complete. By following the simple steps above, you can easily set the return button sound on your Redmi 13c. This small setting may allow

2024-03-18 comment 0  1242

Article Introduction：1. First, click [Sound & Touch] in the settings menu of your iPhone. 2. Then, slide the ringtone button to the silent mode on the far left. 3. You can also use the volume down key to minimize the sound, or toggle the mute key on the left side of the phone to mute mode.

2024-03-23 comment 0  898

Article Introduction：1. First open the [Small Daily] software, click [More] and select the [Settings] option in the upper right corner. 2. Then click the [Key Sound] option. 3. Finally, click the [Turn off key tone] option to complete the operation.

2024-06-06 comment 0  817