Article Introduction：If the HTML5 canvas layer disappears on mouse click in Fabric.js and Firefox stops responding when creating the canvas to an image, you can fix this by using Fabric to drag and drop the image from your computer to the canvas. This can be achieved by setting the image's draggable attribute to true −<imgdraggable="true">

2023-08-27 comment 0  601

Article Introduction：Reference content one: 1. How to create a folder. Open the mobile desktop and pinch with two fingers to enter the desktop editing mode. 2. Check the application icon to be placed in the folder. 3. Click [Group] in the upper left corner to create a folder on the desktop. Reference content two: 1. Applications - Edit in the upper right corner - tap and hold a software icon and place it on another icon to create a new folder, then press and hold the folder icon and drag it to the home screen of the phone. 2. To create a new folder on the home screen of some mobile phones, you need to first go to the application-menu key-new folder, then long-press the folder icon and drag it to the home screen of the phone. 3. How to operate some mobile phones: Click the menu button on the home screen-select New Folder. Reference content three: 1. Select any A on the desktop

2024-03-25 comment 0  1011

Article Introduction：1. First open the computer desktop. 2. Then double-click the desktop CorelDRAW software or find the CorelDRAW folder on the desktop taskbar and click CorelDRAW. 3. After opening CorelDRAW, create a new layer. 4. Then on the upper toolbar, click the import function or enter Ctrl+I with the keyboard. 5. After opening the import function interface, select the CorelDRAW image you want to import and click Import. 6. Finally, the image is imported into the CorelDRAW layer.

2024-05-08 comment 0  927

Article Introduction：First open Photoshop, create a canvas and enter black text. Note that the text must be black. Then right-click the [Layer Style] icon below the layer. Then select [Color Overlay] in the menu. Then select [Dissolve] in the blending mode and select the red color. Set to lower the opacity and observe the text effect. Click OK when satisfied.

2024-06-06 comment 0  706

Article Introduction：1. First, select the graphics that need to be added. 2. Block command (W) - select base point - save/name. Note: w is an external block command. The save location is on the desktop for subsequent operations. The name should be as concise as possible. 1. Open the just created Peppa Pig CAD file 2. Yanxiu Toolbox - Environment Settings - Create Slideshow File (used in parts library) 3. After clicking, the lower command prompt bar will prompt that the slideshow file has been created 4. Return to the desktop and you can see Created slideshow file 1. Open the CAD software 2. Yanxiu Toolbox - Mold Standard Parts - Parts Library 3. Open the directory. 1. Open the directory - the folder where the current graphics is located appears, but this is not what we need. 2. Return to the previous std folder - create a new folder xz (the name of the folder

2024-06-03 comment 0  1052

Article Introduction：If there are various image attachments in your map in BigemapGISOffice, it is recommended that you export backups frequently. Bigemap specially creates a quick import and export channel for users. Let’s teach you how to export images. [Export method] 1. First click [Layer Management], select the layer you want to export, and right-click the menu and select [Export Data]. 2. Then set the export location, uncheck Merge pictures into the same folder, default and confirm. 3. Then go to the previously set folder, you can see the longitude and latitude coordinates, names, and key pictures of all points. At the same time, the pictures are saved separately according to the point names, so there is no need for manual classification.

2024-02-13 comment 0  615

Article Introduction：1. Open AE and create a composition 1. 2. Click on the shape layer and select the shape you want to draw. 3. Hold down the Alt key with your left hand and use the mouse with your right hand to draw in the view window. 4. Select the shape layer you drew with the mouse, and then select the pen tool. 5. Select the position where you want to change the shape in the view panel, and you can change the existing vertex positions. 6. You can also add vertices at any desired position on the shape layer and move them around to adjust any shape you want.

2024-05-09 comment 0  1087

Article Introduction：Open BeyondCompare, select the folder comparison session, and open the session operation interface. Click the [Browse Folder] button to select the folder to be compared. As shown in the figure, the differences between the compared folders are marked in different colors. Maintain relative folder structure when copying files To ensure that the folder structure remains unchanged means, the minimum difference between all selected file paths is determined and created in the destination folder. When copying files, you can customize the destination location for the archive file. If the archive file does not exist, BeyondCompare will create it for you. Keep the base folder structure when copying files. When copying files, if you choose to copy the files in a way that keeps the base folder structure, a complete path will be created in the destination folder.

2024-04-22 comment 0  680

Article Introduction：First open the picture you want to adjust the lip color and click the pen tool. Then draw a path along the lips and click Make Selection in the menu bar. Then set the Feather value in the Create Selection tab, as shown below, set it to 20 pixels. Hold down the ctrl+j keys again and copy the selection created on the lips to a new layer. Click the Add Adjustment Layer button and select the [Hue/Saturation] adjustment layer. Finally, mouse over the Hue/Saturation adjustment layer and click [Create Clipping Mask]. At this time, drag the slider that increases the saturation to increase the saturation, and pay attention to the effect of the picture.

2024-06-09 comment 0  1030

Article Introduction：First click File – Batch Processing in the upper menu bar. Then click [Source] - Folder - click the yellow icon to open the target folder - select the audio format. If all formats need to be adjusted, there is no need to select it. Just keep the default *.* - if it is a multi-layer folder , check [Include all subfolders] - click [OK]. In this way, the audio in your entire folder will be added. Then enter the [Processing] tab - click [Add Effect] - click the first option, select [Match Volume] in its drop-down menu - click [Default] - click [Add] - [Close] , then close the small window and return to the large window. Finally, transfer to the [Destination] tab - select the destination folder as shown in the figure, remember to check [Keep sub-text]

2024-06-03 comment 0  591

Article Introduction：1. First import the picture material, select the layer, click the Create New Fill or Adjustment Layer button, and select the black and white effect. 2. Then create a new adjustment layer above the original layer; 3. Then drag the slider of the property panel with the mouse to customize the color parameter ratio. 4. Finally, close the layer modification panel, click the Save As button in the File menu, and save the image.

2024-04-23 comment 0  758

Article Introduction：Introduction: This article is here to introduce you to the relevant content about adding new folders on Mac. I hope it will be helpful to you, let’s take a look. How to create a new folder on an Apple computer. Usually we open the location where we want to create a new folder in Finder, then right-click the mouse in a blank space and select "New Folder" to create a new folder. If it is difficult to find a blank space in Finder to right-click, we can also create a new folder by selecting "New Folder" from the "File" option in the menu bar. This makes it easy to create new folders in the desired location. According to the arrow in the picture below, first click the [Settings] icon on the left menu bar, find and click the [Touchpad] option. First of all, in the Apple Computer Finder world

2024-02-08 comment 0  1397

Article Introduction：1. After opening the interface, find the layer page that needs to be modified, and click the mouse to select the layer. 2. Right-click the mouse to pop up the drop-down menu, and click the rename button at the bottom. 3. At this time, the user can re-enter the layer using the input method. Name. After completing the input, click any blank position to save the settings.

2024-06-05 comment 0  578

Article Introduction：This article will introduce how to place folders on Mac. I hope it will be helpful to you. Please read on. How to create a new folder on a Mac computer is as follows: First, click the [Settings] icon on the left menu bar as pointed by the arrow in the picture below, then find and click the [Touchpad] option. Usually we open Finder, right-click the location where we want to create a new folder, and select New Folder to create a new folder. If you can't find the option to right-click on a blank space in Finder, we can also use the file option on the menu bar and select New Folder to create a new folder. 3. Select "New Folder" from the "File" menu. Press Comm simultaneously

2024-02-05 comment 0  1202

Article Introduction：1. First import a background image into the new layer created; 2. Then place the second image by dragging it with the mouse and adjust the size appropriately. 3. After adjusting, click Save and open the layer menu. 4. Finally, click the Merge Down button to combine the pictures.

2024-06-13 comment 0  1112

Article Introduction：How to remove the black frame on the desktop of Windows 11 computer? Solution 1: 1. Copy the folder in the black box; 2. Create a new folder at any location, open the folder, and copy the folder in the black box to display it normally. Solution two: 1. Open this computer, click -; 2. Switch to the tab, check the box below and click OK to save the settings. However, method two has a disadvantage, that is, you cannot see the thumbnail of the image after the setting is completed! Solution 3. 1. View->Small icons or large icons, which treats the symptoms rather than the root cause. 2. Select the software whose icon turns black, such as QQ, right-click -> Properties -> Change Icon, and select the appropriate icon (not the QQ icon). Although the icon changes to another style of icon (not a black box), it does not match the software. original

2024-01-12 comment 0  2999

Article Introduction：1. First, after opening the material file, right-click the blank space of the layer and click the camera button under the new option. 2. Then, after completing the creation, click the camera icon in the upper left corner. 3. Finally, in the composition window, hold down the mouse Just left-click and drag the graphic in a single direction

2024-05-09 comment 0  614

Article Introduction：Open the work layer. Open any work and click on the two square icons in the upper right corner. Turn off the background layer. In the pop-up layer page, select the background layer and check it off. Select the sharing type to open the operation panel, click Share, and click the PNG format image. Export a transparent background image In the sharing dialog box, select a sharing method to export a transparent background image.

2024-06-26 comment 0  530

Article Introduction：1. First, we open Photoshop, click [Create] in the screen box, and create a new blank canvas. 2. Then, we select the gradient tool and add a blue and white color gradient background effect to the background layer. Then create a new blank layer. 3. Next, we use the cloud graphics in the custom shape tool, set the attribute to pixels, and draw a few clouds on the canvas. Then right-click on the cloud layer and select [Convert to Smart Object]. 4. We click [Window] - [Timeline] - [Create Timeline] on the menu bar. 5. We click on the timeline panel of the cloud layer, find [Transform], as shown below, click the alarm clock icon at the starting position, set the first mark point, then we move the timeline slider to the back of the timeline, and Move the clouds horizontally,

2024-06-05 comment 0  461

Article Introduction：How to convert CAD midpoint coordinate data into an Excel table. This is a method for your reference: On a topographic map, the elevation of each point is generally marked. This method has no effect if no elevation is indicated. First, open the original dwg file, the layer where the observation points and elevation labels are located, and turn off all other layers so that only the point and elevation label information is displayed. Next, use the mouse frame selection method to select all points and elevation label information. Be careful not to use Ctrl+A to select all. Then, create a new dwg file, right-click on the window, select "Paste to original coordinates" from the pop-up options, and paste the previously selected point and elevation label information into the new file. Finally, save the new file to preserve the copied point and elevation labels

2024-01-16 comment 0  2171