Penyelesaian Masalah Automatik & Sistem ITSM menggunakan EventBridge dan Lambda-Tutorial Python-php.cn

pengenalan :

Kawan-kawan, Dalam Operasi IT, adalah tugas yang sangat umum untuk memantau metrik pelayan seperti penggunaan cpu/memori dan cakera atau sistem fail, tetapi sekiranya mana-mana metrik dicetuskan untuk menjadi kritikal, maka orang yang berdedikasi perlu melaksanakan beberapa asas menyelesaikan masalah dengan melog masuk ke pelayan dan ketahui punca penggunaan awal yang perlu dilakukan oleh seseorang berkali-kali jika dia mendapat makluman yang sama yang menimbulkan kebosanan dan tidak produktif sama sekali. Jadi sebagai penyelesaian, boleh ada sistem yang dibangunkan yang akan bertindak balas apabila penggera dicetuskan dan bertindak ke atas kejadian tersebut dengan melaksanakan beberapa arahan penyelesaian masalah asas. Sekadar meringkaskan penyataan masalah dan jangkaan -

Pernyataan Masalah:

Membangunkan sistem yang akan memenuhi di bawah jangkaan -

Setiap kejadian EC2 harus dipantau oleh CloudWatch.
Setelah penggera dicetuskan, sesuatu mesti ada yang akan log masuk ke tika EC2 yang terjejas itu dan melaksanakan beberapa arahan penyelesaian masalah asas.
Kemudian, cipta isu JIRA untuk mendokumentasikan kejadian itu dan tambahkan output arahan dalam bahagian ulasan.
Kemudian, hantar e-mel automatik dengan menyediakan semua butiran penggera dan butiran isu JIRA.

Rajah Seni Bina :

Automatic Troubleshooting & ITSM System using EventBridge and Lambda

Prasyarat:

Kejadian EC2
Penggera CloudWatch
Peraturan EventBridge
Fungsi Lambda
Akaun JIRA
Perkhidmatan Pemberitahuan Mudah

Langkah-langkah Pelaksanaan:

A. Pemasangan Ejen CloudWatch dan Persediaan Konfigurasi :
Buka konsol Pengurus Sistem dan klik pada "Dokumen"
Cari dokumen "AWS-ConfigureAWSPackage" dan laksanakan dengan memberikan butiran yang diperlukan.
Nama Pakej = AmazonCloudwatchAgent
Selepas pemasangan, ejen CloudWatch perlu dikonfigurasikan mengikut fail konfigurasi. Untuk ini, laksanakan dokumen AmazonCloudWatch-ManageAgent. Selain itu, pastikan fail konfigurasi JSON CloudWatch disimpan dalam Parameter SSM.
Sebaik sahaja anda melihat bahawa metrik melaporkan kepada konsol CloudWatch, kemudian buat penggera untuk penggunaan CPU dan Memori dll.
B. Sediakan Peraturan EventBridge :
Untuk menjejaki perubahan keadaan penggera, di sini, kami telah memperibadikan corak sedikit untuk menjejaki perubahan keadaan penggera daripada OK kepada ALARM sahaja, bukan membalikkan satu. Kemudian, tambahkan peraturan ini pada fungsi lambda sebagai pencetus.

{
  "source": ["aws.cloudwatch"],
  "detail-type": ["CloudWatch Alarm State Change"],
  "detail": {
    "state": {
      "value": ["ALARM"]
    },
    "previousState": {
      "value": ["OK"]
    }
  }
}

Salin selepas log masuk

C. Cipta Fungsi Lambda untuk Menghantar E-mel dan Log Insiden dalam JIRA : Fungsi lambda ini dicipta untuk berbilang aktiviti yang dicetuskan oleh peraturan EventBridge dan sebagai topik SNS destinasi ditambah dengan menggunakan AWS SDK(Boto3). Sebaik sahaja peraturan EventBridge dicetuskan kemudian menghantar kandungan acara JSON ke lambda yang mana fungsinya menangkap berbilang butiran untuk diproses dengan cara yang berbeza. Di sini, setakat ini kami telah mengusahakan dua jenis penggera - i. Penggunaan CPU dan ii. Penggunaan Memori. Sebaik sahaja mana-mana daripada dua penggera ini dicetuskan dan keadaan penggera ditukar daripada OK kepada ALARM, maka EventBridge akan dicetuskan yang turut mencetuskan fungsi Lambda untuk melaksanakan tugas-tugas yang disebut dalam kod borang.

Prasyarat Lambda :
Kami memerlukan modul di bawah untuk diimport untuk membuat kod berfungsi -

>> os
>> sys
>> json
>> boto3
>> masa
>> permintaan

Nota: Daripada modul di atas, kecuali selebihnya modul 'permintaan' semuanya dimuat turun dalam infrastruktur asas lambda secara lalai. Mengimport modul 'permintaan' secara langsung tidak akan disokong dalam Lambda. Oleh itu, mula-mula, pasang modul permintaan dalam folder dalam mesin tempatan anda (komputer riba) dengan melaksanakan arahan di bawah -

pip3 install requests -t <directory path> --no-user

Salin selepas log masuk

_Selepas itu, ini akan dimuat turun dalam folder dari mana anda melaksanakan arahan di atas atau tempat anda ingin menyimpan kod sumber modul, di sini saya harap kod lambda sedang disediakan dalam mesin tempatan anda. Jika ya, kemudian buat fail zip bagi keseluruhan kod sumber lambda itu dengan modul. Selepas itu, muat naik fail zip ke fungsi lambda.

Jadi, di sini kami beraksi di bawah dua senario -

1. Penggunaan CPU - Jika penggera penggunaan CPU dicetuskan, maka fungsi lambda perlu mengambil tika dan log masuk ke tika itu dan melaksanakan 5 proses penggunaan tinggi teratas. Kemudian, ia akan mencipta isu JIRA dan menambah butiran proses di bahagian komen. Pada masa yang sama, ia akan menghantar e-mel dengan butiran penggera dan butiran isu jira dengan output proses.

2. Penggunaan Memori - Pendekatan yang sama seperti di atas

Now, let me reframe the task details which lambda is supposed to perform -

Login to Instance
Perform Basic Troubleshooting Steps.
Create a JIRA Issue
Send Email to Recipient with all Details

Scenario 1: When alarm state has been changed from OK to ALARM

First Set (Define the cpu and memory function) :

################# Importing Required Modules ################
############################################################
import json
import boto3
import time
import os
import sys
sys.path.append('./python')   ## This will add requests module along with all dependencies into this script
import requests
from requests.auth import HTTPBasicAuth

################## Calling AWS Services ###################
###########################################################
ssm = boto3.client('ssm')
sns_client = boto3.client('sns')
ec2 = boto3.client('ec2')

################## Defining Blank Variable ################
###########################################################
cpu_process_op = ''
mem_process_op = ''
issueid = ''
issuekey = ''
issuelink = ''

################# Function for CPU Utilization ################
###############################################################
def cpu_utilization(instanceid, metric_name, previous_state, current_state):
    global cpu_process_op
    if previous_state == 'OK' and current_state == 'ALARM':
        command = 'ps -eo user,pid,ppid,cmd,%mem,%cpu --sort=-%cpu | head -5'
        print(f'Impacted Instance ID is : {instanceid}, Metric Name: {metric_name}')
        # Start a session
        print(f'Starting session to {instanceid}')
        response = ssm.send_command(InstanceIds = [instanceid], DocumentName="AWS-RunShellScript", Parameters={'commands': [command]})
        command_id = response['Command']['CommandId']
        print(f'Command ID: {command_id}')
        # Retrieve the command output
        time.sleep(4)
        output = ssm.get_command_invocation(CommandId=command_id, InstanceId=instanceid)
        print('Please find below output -\n', output['StandardOutputContent'])
        cpu_process_op = output['StandardOutputContent']
    else:
        print('None')

################# Function for Memory Utilization ################
############################################################### 
def mem_utilization(instanceid, metric_name, previous_state, current_state):
    global mem_process_op
    if previous_state == 'OK' and current_state == 'ALARM':
        command = 'ps -eo user,pid,ppid,cmd,%mem,%cpu --sort=-%mem | head -5'
        print(f'Impacted Instance ID is : {instanceid}, Metric Name: {metric_name}')
        # Start a session
        print(f'Starting session to {instanceid}')
        response = ssm.send_command(InstanceIds = [instanceid], DocumentName="AWS-RunShellScript", Parameters={'commands': [command]})
        command_id = response['Command']['CommandId']
        print(f'Command ID: {command_id}')
        # Retrieve the command output
        time.sleep(4)
        output = ssm.get_command_invocation(CommandId=command_id, InstanceId=instanceid)
        print('Please find below output -\n', output['StandardOutputContent'])
        mem_process_op = output['StandardOutputContent']
    else:
        print('None')

Salin selepas log masuk

Second Set (Create JIRA Issue) :

################## Create JIRA Issue ################
#####################################################
def create_issues(instanceid, metric_name, account, timestamp, region, current_state, previous_state, cpu_process_op, mem_process_op, metric_val):
    ## Create Issue ##
    url ='https://<your-user-name>.atlassian.net//rest/api/2/issue'
    username = os.environ['username']
    api_token = os.environ['token']
    project = 'AnirbanSpace'
    issue_type = 'Incident'
    assignee = os.environ['username']
    summ_metric  = '%CPU Utilization' if 'CPU' in metric_name else '%Memory Utilization' if 'mem' in metric_name else '%Filesystem Utilization' if metric_name == 'disk_used_percent' else None
    metric_val = metric_val
    summary = f'Client | {account} | {instanceid} | {summ_metric} | Metric Value: {metric_val}'
    description = f'Client: Company\nAccount: {account}\nRegion: {region}\nInstanceID = {instanceid}\nTimestamp = {timestamp}\nCurrent State: {current_state}\nPrevious State = {previous_state}\nMetric Value = {metric_val}'

    issue_data = {
        "fields": {
            "project": {
                "key": "SCRUM"
            },
            "summary": summary,
            "description": description,
            "issuetype": {
                "name": issue_type
            },
            "assignee": {
                "name": assignee
            }
        }
    }
    data = json.dumps(issue_data)
    headers = {
        "Accept": "application/json",
        "Content-Type": "application/json"
    }
    auth = HTTPBasicAuth(username, api_token)
    response = requests.post(url, headers=headers, auth=auth, data=data)
    global issueid
    global issuekey
    global issuelink
    issueid = response.json().get('id')
    issuekey = response.json().get('key')
    issuelink = response.json().get('self')

    ################ Add Comment To Above Created JIRA Issue ###################
    output = cpu_process_op if metric_name == 'CPUUtilization' else mem_process_op if metric_name == 'mem_used_percent' else None
    comment_api_url = f"{url}/{issuekey}/comment"
    add_comment = requests.post(comment_api_url, headers=headers, auth=auth, data=json.dumps({"body": output}))

    ## Check the response
    if response.status_code == 201:
        print("Issue created successfully. Issue key:", response.json().get('key'))
    else:
        print(f"Failed to create issue. Status code: {response.status_code}, Response: {response.text}")

Salin selepas log masuk

Third Set (Send an Email) :

################## Send An Email ################
#################################################
def send_email(instanceid, metric_name, account, region, timestamp, current_state, current_reason, previous_state, previous_reason, cpu_process_op, mem_process_op, metric_val, issueid, issuekey, issuelink):
    ### Define a dictionary of custom input ###
    metric_list = {'mem_used_percent': 'Memory', 'disk_used_percent': 'Disk', 'CPUUtilization': 'CPU'}

    ### Conditions ###
    if previous_state == 'OK' and current_state == 'ALARM' and metric_name in list(metric_list.keys()):
        metric_msg = metric_list[metric_name]
        output = cpu_process_op if metric_name == 'CPUUtilization' else mem_process_op if metric_name == 'mem_used_percent' else None
        print('This is output', output)
        email_body = f"Hi Team, \n\nPlease be informed that {metric_msg} utilization is high for the instanceid {instanceid}. Please find below more information \n\nAlarm Details:\nMetricName = {metric_name}, \nAccount = {account}, \nTimestamp = {timestamp}, \nRegion = {region}, \nInstanceID = {instanceid}, \nCurrentState = {current_state}, \nReason = {current_reason}, \nMetricValue = {metric_val}, \nThreshold = 80.00 \n\nProcessOutput: \n{output}\nIncident Deatils:\nIssueID = {issueid}, \nIssueKey = {issuekey}, \nLink = {issuelink}\n\nRegards,\nAnirban Das,\nGlobal Cloud Operations Team"
        res = sns_client.publish(
            TopicArn = os.environ['snsarn'],
            Subject = f'High {metric_msg} Utilization Alert : {instanceid}',
            Message = str(email_body)
            )
        print('Mail has been sent') if res else print('Email not sent')
    else:
        email_body = str(0)

Salin selepas log masuk

Fourth Set (Calling Lambda Handler Function) :

################## Lambda Handler Function ################
###########################################################
def lambda_handler(event, context):
    instanceid = event['detail']['configuration']['metrics'][0]['metricStat']['metric']['dimensions']['InstanceId']
    metric_name = event['detail']['configuration']['metrics'][0]['metricStat']['metric']['name']
    account = event['account']
    timestamp = event['time']
    region = event['region']
    current_state = event['detail']['state']['value']
    current_reason = event['detail']['state']['reason']
    previous_state = event['detail']['previousState']['value']
    previous_reason = event['detail']['previousState']['reason']
    metric_val = json.loads(event['detail']['state']['reasonData'])['evaluatedDatapoints'][0]['value']
    ##### function calling #####
    if metric_name == 'CPUUtilization':
        cpu_utilization(instanceid, metric_name, previous_state, current_state)
        create_issues(instanceid, metric_name, account, timestamp, region, current_state, previous_state, cpu_process_op, mem_process_op, metric_val)
        send_email(instanceid, metric_name, account, region, timestamp, current_state, current_reason, previous_state, previous_reason, cpu_process_op, mem_process_op, metric_val, issueid, issuekey, issuelink)
    elif metric_name == 'mem_used_percent':
        mem_utilization(instanceid, metric_name, previous_state, current_state)
        create_issues(instanceid, metric_name, account, timestamp, region, current_state, previous_state, cpu_process_op, mem_process_op, metric_val)
        send_email(instanceid, metric_name, account, region, timestamp, current_state, current_reason, previous_state, previous_reason, cpu_process_op, mem_process_op, metric_val, issueid, issuekey, issuelink)
    else:
        None

Salin selepas log masuk

Alarm Email Screenshot :

Automatic Troubleshooting & ITSM System using EventBridge and Lambda

Note: In ideal scenario, threshold is 80%, but for testing I changed it to 10%. Please see the Reason.

Alarm JIRA Issue :

Automatic Troubleshooting & ITSM System using EventBridge and Lambda

Scenario 2: When alarm state has been changed from OK to Insufficient data

In this scenario, if any server cpu or memory utilization metrics data are not captured, then alarm state gets changed from OK to INSUFFICIENT_DATA. This state can be achieved in two ways - a.) If server is in stopped state b.) If CloudWatch agent is not running or went in dead state.
So, as per below script, you'll be able to see that when cpu or memory utilization alarm status gets insufficient data, then lambda will first check if instance is in running status or not. If instance is in running state, then it will login and check CloudWatch agent status. Post that, it will create a JIRA issue and post the agent status in comment section of JIRA issue. After that, it will send an email with alarm details and agent status.

Full Code :

################# Importing Required Modules ################
############################################################
import json
import boto3
import time
import os
import sys
sys.path.append('./python')   ## This will add requests module along with all dependencies into this script
import requests
from requests.auth import HTTPBasicAuth

################## Calling AWS Services ###################
###########################################################
ssm = boto3.client('ssm')
sns_client = boto3.client('sns')
ec2 = boto3.client('ec2')

################## Defining Blank Variable ################
###########################################################
cpu_process_op = ''
mem_process_op = ''
issueid = ''
issuekey = ''
issuelink = ''

################# Function for CPU Utilization ################
###############################################################
def cpu_utilization(instanceid, metric_name, previous_state, current_state):
    global cpu_process_op
    if previous_state == 'OK' and current_state == 'INSUFFICIENT_DATA':
        ec2_status = ec2.describe_instance_status(InstanceIds=[instanceid,])['InstanceStatuses'][0]['InstanceState']['Name']
        if ec2_status == 'running':
            command = 'systemctl status amazon-cloudwatch-agent;sleep 3;systemctl restart amazon-cloudwatch-agent'
            print(f'Impacted Instance ID is : {instanceid}, Metric Name: {metric_name}')
            # Start a session
            print(f'Starting session to {instanceid}')
            response = ssm.send_command(InstanceIds = [instanceid], DocumentName="AWS-RunShellScript", Parameters={'commands': [command]})
            command_id = response['Command']['CommandId']
            print(f'Command ID: {command_id}')
            # Retrieve the command output
            time.sleep(4)
            output = ssm.get_command_invocation(CommandId=command_id, InstanceId=instanceid)
            print('Please find below output -\n', output['StandardOutputContent'])
            cpu_process_op = output['StandardOutputContent']
        else:
            cpu_process_op = f'Instance current status is {ec2_status}. Not able to reach out!!'
            print(f'Instance current status is {ec2_status}. Not able to reach out!!')
    else:
        print('None')

################# Function for Memory Utilization ################
############################################################### 
def mem_utilization(instanceid, metric_name, previous_state, current_state):
    global mem_process_op
    if previous_state == 'OK' and current_state == 'INSUFFICIENT_DATA':
        ec2_status = ec2.describe_instance_status(InstanceIds=[instanceid,])['InstanceStatuses'][0]['InstanceState']['Name']
        if ec2_status == 'running':
            command = 'systemctl status amazon-cloudwatch-agent'
            print(f'Impacted Instance ID is : {instanceid}, Metric Name: {metric_name}')
            # Start a session
            print(f'Starting session to {instanceid}')
            response = ssm.send_command(InstanceIds = [instanceid], DocumentName="AWS-RunShellScript", Parameters={'commands': [command]})
            command_id = response['Command']['CommandId']
            print(f'Command ID: {command_id}')
            # Retrieve the command output
            time.sleep(4)
            output = ssm.get_command_invocation(CommandId=command_id, InstanceId=instanceid)
            print('Please find below output -\n', output['StandardOutputContent'])
            mem_process_op = output['StandardOutputContent']
            print(mem_process_op)
        else:
            mem_process_op = f'Instance current status is {ec2_status}. Not able to reach out!!'
            print(f'Instance current status is {ec2_status}. Not able to reach out!!')     
    else:
        print('None')

################## Create JIRA Issue ################
#####################################################
def create_issues(instanceid, metric_name, account, timestamp, region, current_state, previous_state, cpu_process_op, mem_process_op, metric_val):
    ## Create Issue ##
    url ='https://<your-user-name>.atlassian.net//rest/api/2/issue'
    username = os.environ['username']
    api_token = os.environ['token']
    project = 'AnirbanSpace'
    issue_type = 'Incident'
    assignee = os.environ['username']
    summ_metric  = '%CPU Utilization' if 'CPU' in metric_name else '%Memory Utilization' if 'mem' in metric_name else '%Filesystem Utilization' if metric_name == 'disk_used_percent' else None
    metric_val = metric_val
    summary = f'Client | {account} | {instanceid} | {summ_metric} | Metric Value: {metric_val}'
    description = f'Client: Company\nAccount: {account}\nRegion: {region}\nInstanceID = {instanceid}\nTimestamp = {timestamp}\nCurrent State: {current_state}\nPrevious State = {previous_state}\nMetric Value = {metric_val}'

    issue_data = {
        "fields": {
            "project": {
                "key": "SCRUM"
            },
            "summary": summary,
            "description": description,
            "issuetype": {
                "name": issue_type
            },
            "assignee": {
                "name": assignee
            }
        }
    }
    data = json.dumps(issue_data)
    headers = {
        "Accept": "application/json",
        "Content-Type": "application/json"
    }
    auth = HTTPBasicAuth(username, api_token)
    response = requests.post(url, headers=headers, auth=auth, data=data)
    global issueid
    global issuekey
    global issuelink
    issueid = response.json().get('id')
    issuekey = response.json().get('key')
    issuelink = response.json().get('self')

    ################ Add Comment To Above Created JIRA Issue ###################
    output = cpu_process_op if metric_name == 'CPUUtilization' else mem_process_op if metric_name == 'mem_used_percent' else None
    comment_api_url = f"{url}/{issuekey}/comment"
    add_comment = requests.post(comment_api_url, headers=headers, auth=auth, data=json.dumps({"body": output}))

    ## Check the response
    if response.status_code == 201:
        print("Issue created successfully. Issue key:", response.json().get('key'))
    else:
        print(f"Failed to create issue. Status code: {response.status_code}, Response: {response.text}")

################## Send An Email ################
#################################################
def send_email(instanceid, metric_name, account, region, timestamp, current_state, current_reason, previous_state, previous_reason, cpu_process_op, mem_process_op, metric_val, issueid, issuekey, issuelink):
    ### Define a dictionary of custom input ###
    metric_list = {'mem_used_percent': 'Memory', 'disk_used_percent': 'Disk', 'CPUUtilization': 'CPU'}

    ### Conditions ###
    if previous_state == 'OK' and current_state == 'INSUFFICIENT_DATA' and metric_name in list(metric_list.keys()):
        metric_msg = metric_list[metric_name]
        output = cpu_process_op if metric_name == 'CPUUtilization' else mem_process_op if metric_name == 'mem_used_percent' else None
        email_body = f"Hi Team, \n\nPlease be informed that {metric_msg} utilization alarm state has been changed to {current_state} for the instanceid {instanceid}. Please find below more information \n\nAlarm Details:\nMetricName = {metric_name}, \n Account = {account}, \nTimestamp = {timestamp}, \nRegion = {region},  \nInstanceID = {instanceid}, \nCurrentState = {current_state}, \nReason = {current_reason}, \nMetricValue = {metric_val}, \nThreshold = 80.00  \n\nProcessOutput = \n{output}\nIncident Deatils:\nIssueID = {issueid}, \nIssueKey = {issuekey}, \nLink = {issuelink}\n\nRegards,\nAnirban Das,\nGlobal Cloud Operations Team"
        res = sns_client.publish(
            TopicArn = os.environ['snsarn'],
            Subject = f'Insufficient {metric_msg} Utilization Alarm : {instanceid}',
            Message = str(email_body)
        )
        print('Mail has been sent') if res else print('Email not sent')
    else:
        email_body = str(0)

################## Lambda Handler Function ################
###########################################################
def lambda_handler(event, context):
    instanceid = event['detail']['configuration']['metrics'][0]['metricStat']['metric']['dimensions']['InstanceId']
    metric_name = event['detail']['configuration']['metrics'][0]['metricStat']['metric']['name']
    account = event['account']
    timestamp = event['time']
    region = event['region']
    current_state = event['detail']['state']['value']
    current_reason = event['detail']['state']['reason']
    previous_state = event['detail']['previousState']['value']
    previous_reason = event['detail']['previousState']['reason']
    metric_val = 'NA'
    ##### function calling #####
    if metric_name == 'CPUUtilization':
        cpu_utilization(instanceid, metric_name, previous_state, current_state)
        create_issues(instanceid, metric_name, account, timestamp, region, current_state, previous_state, cpu_process_op, mem_process_op, metric_val)
        send_email(instanceid, metric_name, account, region, timestamp, current_state, current_reason, previous_state, previous_reason, cpu_process_op, mem_process_op, metric_val, issueid, issuekey, issuelink)
    elif metric_name == 'mem_used_percent':
        mem_utilization(instanceid, metric_name, previous_state, current_state)
        create_issues(instanceid, metric_name, account, timestamp, region, current_state, previous_state, cpu_process_op, mem_process_op, metric_val)
        send_email(instanceid, metric_name, account, region, timestamp, current_state, current_reason, previous_state, previous_reason, cpu_process_op, mem_process_op, metric_val, issueid, issuekey, issuelink)
    else:
        None

Salin selepas log masuk

Insufficient Data Email Screenshot :

Automatic Troubleshooting & ITSM System using EventBridge and Lambda

Insufficient data JIRA Issue :

Automatic Troubleshooting & ITSM System using EventBridge and Lambda

Conclusion :

In this article, we have tested scenarios on both cpu and memory utilization, but there can be lots of metrics on which we can configure auto-incident and auto-email functionality which will reduce significant efforts in terms of monitoring and creating incidents and all. This solution has given a initial approach how we can proceed further, but for sure there can be other possibilities to achieve this goal. I believe you all will understand the way we tried to make this relatable. Please like and comment if you love this article or have any other suggestions, so that we can populate in coming articles. ??

Thanks!!
Anirban Das

Atas ialah kandungan terperinci Penyelesaian Masalah Automatik & Sistem ITSM menggunakan EventBridge dan Lambda. Untuk maklumat lanjut, sila ikut artikel berkaitan lain di laman web China PHP!