How to connect the optical modem to the wireless router: 1. Connect the LAN port of the optical modem to the WLAN port of the router; 2. Use a toothpick or needle to poke the reset button of the router; 3. Generally press the reset button on the back of the router. There is a management page, for example, it is tplolgin.cn on the router. Enter this address in the browser. If it does not exist, enter 192.168.1.1. This is the default address of the router. 4. Enter the management page, and you will first be asked to set it up. Once the administrator password is set, you can enter the router settings and so on.
The method of connecting the optical modem to the wireless router is as follows:
1. Connect the LAN port of the optical modem to the WLAN port of the router.
2. Use a toothpick or needle to poke the reset button of the router.
3. There is usually a management page on the back of the router. For example, the one on my router is tplolgin.cn. Enter this address in the browser. If not, enter 192.168.1.1. This is the address of the router. default address.
4. When entering the management page, you will first be asked to set the administrator password. Once set, you can enter the router settings.
5. LAN port settings, change the IP address to 192.168.0.10, because the cat uses 192.168.1.1, so the router needs to be changed to another IP.
6. Internet settings, as follows, use dial-up Internet access, do not use automatic IP, and then enter the broadband Internet access account and password.
7. Wireless settings. Set the wireless name and password so that you can surf the Internet happily.
In addition, it should be noted that the default management address of the general operator's optical modem is 192.168.1.1, so the management address of the wireless router needs to be assigned an address in another network segment. The method is to use a mobile phone or computer wifi or wired connection to the wireless router, then open the browser address bar and enter the default login address of the router. Generally, the login address is written on the nameplate on the back of the router. After logging in, modify the LAN port LAN IP to 192.168. .31.1 or anything other than 192.168.1.1 is acceptable, so as not to cause an IP conflict between the wireless router and the optical modem.
In addition, you can also follow the following steps:
1. First determine whether the optical modem needs to dial. Test steps: The computer is directly connected to the optical modem. If you can access the Internet, it has been set up. After the test, unplug the computer network cable.
2. Use a network cable to connect the computer and the router. At this time, you need to check the IP address (usually Baidu will do). After entering the interface, do the following: After the operation is completed, plug the network cable into the WAN port of the router, and plug the other end into the LAN port or Gigabit network port of the optical modem. This way your computer and wireless can access the Internet.
3. Optical modem needs to be dialed separately. (If this is the case, you don’t need to worry about the mode of the optical modem. You only need to plug the network cable into the LAN port or Gigabit network port of the optical modem.) Find the network segment of the router. The specific steps are the same as above. Log in to the router 1. Find the network settings. Generally, it will ask you to choose the Internet access method (select the dial-up mode), then fill in the broadband account and password in the account and password fields, and click Apply. After the operation is completed, plug the network cable into the WAN port of the router, and plug the other end into the LAN port or Gigabit network port of the optical modem. Plug the computer network cable into the router's LAN port, so that your computer and wireless can access the Internet.
The above is the method for connecting the optical modem to the wireless router for your reference. If the problem still cannot be solved, it is recommended to consult professionals or the corresponding operator for more help.
The above is the detailed content of How to connect optical modem to wireless router. For more information, please follow other related articles on the PHP Chinese website!