Home > Article > Operation and Maintenance > How to perform network configuration and network troubleshooting on Linux systems
Linux system is a powerful server operating system. Network configuration and network troubleshooting are indispensable skills for operation and maintenance personnel. This article will introduce in detail how to perform network configuration and network troubleshooting on Linux systems, and provide specific code examples to help readers understand and master the relevant knowledge more deeply.
1. Network configuration
In the Linux system, the command to configure the IP address is to use ifconfig. We can use the following command To configure the IP address:
ifconfig eth0 192.168.1.100 netmask 255.255.255.0
Among them, eth0 represents the network card name, 192.168.1.100 represents the IP address, and 255.255.255.0 represents the subnet mask, which can be adjusted according to the actual situation.
The command to configure the gateway is route add. We can configure the gateway through the following command:
route add default gw 192.168.1.1
Among them, 192.168.1.1 represents The IP address of the gateway.
The command to configure DNS is to modify the resolv.conf file. We can modify it through the following command:
vi /etc/resolv.conf
In the open file , add the following content:
nameserver 8.8.8.8 nameserver 8.8.4.4
Among them, 8.8.8.8 and 8.8.4.4 represent Google’s public DNS server addresses, which can also be adjusted according to the actual situation.
2. Network troubleshooting
Use the ping command to test whether the network is connected. Use the following command to test:
ping www.baidu.com
If the following results appear, it means the network is connected:
PING www.a.shifen.com (61.135.169.125) 56(84) bytes of data. 64 bytes from 61.135.169.125: icmp_seq=1 ttl=50 time=29.3 ms 64 bytes from 61.135.169.125: icmp_seq=2 ttl=50 time=29.3 ms 64 bytes from 61.135.169.125: icmp_seq=3 ttl=50 time=29.5 ms
If the following results appear, it means the network is not connected:
ping: unknown host www.google.com
At this time, you can check whether the DNS configuration is correct, or you can use Use the ip command to check the network connection status.
Use the netstat command to check the network connection status. Check it with the following command:
netstat -an
Among them, -a means display For all connections, -n indicates to display the IP address and port number in numerical form.
If there are too many network connections, you can use the grep command to filter. For example:
netstat -an | grep 80
means that only connections with port number 80 will be displayed.
If the network connection fails, you also need to check whether the firewall configuration is correct. Run the following command to check:
iptables -L
Among them, -L means list all rules. If you need to open a port, you can use the following command to configure it:
iptables -I INPUT -p tcp --dport 80 -j ACCEPT
Among them, --dport represents the port number that needs to be opened.
The above content is a detailed introduction to the Linux system network configuration and network troubleshooting in this article. I hope readers can master the relevant skills and apply them in actual operation and maintenance.
The above is the detailed content of How to perform network configuration and network troubleshooting on Linux systems. For more information, please follow other related articles on the PHP Chinese website!